| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190427173259.13673-4-andrew@lunn.ch>
Date: Sat, 27 Apr 2019 19:32:58 +0200
From: Andrew Lunn <andrew@...n.ch>
To: David Miller <davem@...emloft.net>
Cc: netdev <netdev@...r.kernel.org>,
Florian Fainelli <f.fainelli@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH net-next 3/4] net: dsa: mv88e6060: Replace REG_WRITE macro
The REG_WRITE macro contains a return statement, making it not very
safe. Remove it by inlining the code.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
drivers/net/dsa/mv88e6060.c | 73 +++++++++++++++++++++----------------
1 file changed, 41 insertions(+), 32 deletions(-)
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index fd9437f9d6b6..68d33c42ce5f 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -35,15 +35,6 @@ static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val)
return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
}
-#define REG_WRITE(addr, reg, val) \
- ({ \
- int __ret; \
- \
- __ret = reg_write(priv, addr, reg, val); \
- if (__ret < 0) \
- return __ret; \
- })
-
static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
{
int ret;
@@ -98,17 +89,21 @@ static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
/* Set all ports to the disabled state. */
for (i = 0; i < MV88E6060_PORTS; i++) {
ret = REG_READ(REG_PORT(i), PORT_CONTROL);
- REG_WRITE(REG_PORT(i), PORT_CONTROL,
- ret & ~PORT_CONTROL_STATE_MASK);
+ ret = reg_write(priv, REG_PORT(i), PORT_CONTROL,
+ ret & ~PORT_CONTROL_STATE_MASK);
+ if (ret)
+ return ret;
}
/* Wait for transmit queues to drain. */
usleep_range(2000, 4000);
/* Reset the switch. */
- REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
- GLOBAL_ATU_CONTROL_SWRESET |
- GLOBAL_ATU_CONTROL_LEARNDIS);
+ ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
+ GLOBAL_ATU_CONTROL_SWRESET |
+ GLOBAL_ATU_CONTROL_LEARNDIS);
+ if (ret)
+ return ret;
/* Wait up to one second for reset to complete. */
timeout = jiffies + 1 * HZ;
@@ -127,59 +122,67 @@ static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
static int mv88e6060_setup_global(struct mv88e6060_priv *priv)
{
+ int ret;
+
/* Disable discarding of frames with excessive collisions,
* set the maximum frame size to 1536 bytes, and mask all
* interrupt sources.
*/
- REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
+ ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL,
+ GLOBAL_CONTROL_MAX_FRAME_1536);
+ if (ret)
+ return ret;
/* Disable automatic address learning.
*/
- REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
- GLOBAL_ATU_CONTROL_LEARNDIS);
-
- return 0;
+ return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
+ GLOBAL_ATU_CONTROL_LEARNDIS);
}
static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
{
int addr = REG_PORT(p);
+ int ret;
/* Do not force flow control, disable Ingress and Egress
* Header tagging, disable VLAN tunneling, and set the port
* state to Forwarding. Additionally, if this is the CPU
* port, enable Ingress and Egress Trailer tagging mode.
*/
- REG_WRITE(addr, PORT_CONTROL,
- dsa_is_cpu_port(priv->ds, p) ?
+ ret = reg_write(priv, addr, PORT_CONTROL,
+ dsa_is_cpu_port(priv->ds, p) ?
PORT_CONTROL_TRAILER |
PORT_CONTROL_INGRESS_MODE |
PORT_CONTROL_STATE_FORWARDING :
PORT_CONTROL_STATE_FORWARDING);
+ if (ret)
+ return ret;
/* Port based VLAN map: give each port its own address
* database, allow the CPU port to talk to each of the 'real'
* ports, and allow each of the 'real' ports to only talk to
* the CPU port.
*/
- REG_WRITE(addr, PORT_VLAN_MAP,
- ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
- (dsa_is_cpu_port(priv->ds, p) ? dsa_user_ports(priv->ds) :
- BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
+ ret = reg_write(priv, addr, PORT_VLAN_MAP,
+ ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
+ (dsa_is_cpu_port(priv->ds, p) ?
+ dsa_user_ports(priv->ds) :
+ BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
+ if (ret)
+ return ret;
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
* a port bitmap that has only the bit for this port set and
* the other bits clear.
*/
- REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p));
-
- return 0;
+ return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p));
}
static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
{
u8 addr[ETH_ALEN];
+ int ret;
u16 val;
eth_random_addr(addr);
@@ -191,11 +194,17 @@ static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
*/
val &= 0xfeff;
- REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, val);
- REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
- REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
+ ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val);
+ if (ret)
+ return ret;
+
+ ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23,
+ (addr[2] << 8) | addr[3]);
+ if (ret)
+ return ret;
- return 0;
+ return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45,
+ (addr[4] << 8) | addr[5]);
}
static int mv88e6060_setup(struct dsa_switch *ds)
--
2.20.1
Powered by blists - more mailing lists