netdev - Re: Bug#927825: arm: mvneta driver used on Armada XP GP boards does not receive packets (regression from 4.9)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190430220421.GA3750@aurel32.net>
Date:   Wed, 1 May 2019 00:04:21 +0200
From:   Aurelien Jarno <aurel32@...ian.org>
To:     Uwe Kleine-König <uwe@...ine-koenig.org>
Cc:     927825@...s.debian.org, Jason Cooper <jason@...edaemon.net>,
        Andrew Lunn <andrew@...n.ch>,
        Gregory Clement <gregory.clement@...tlin.com>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        netdev@...r.kernel.org, Marcin Wojtas <mw@...ihalf.com>,
        Steve McIntyre <steve@...val.com>
Subject: Re: Bug#927825: arm: mvneta driver used on Armada XP GP boards does
 not receive packets (regression from 4.9)

On 2019-04-30 10:12, Uwe Kleine-König wrote:
> [Adding the mvebu guys and netdev to Cc]
> 
> Hello,
> 
> On Thu, Apr 25, 2019 at 09:17:32PM +0200, Aurelien Jarno wrote:
> > On 2019-04-25 14:50, Aurelien Jarno wrote:
> > > On 2019-04-23 22:16, Aurelien Jarno wrote:
> > > > Source: linux
> > > > Version: 4.19.28-2
> > > > Severity: important
> > > > 
> > > > After upgrading hartmann.debian.org (an armhf buildd using an Armada XP
> > > > GP board) from buster to stretch, the ethernet device is not working
> 
> "upgrading from buster to stretch" doesn't make sense. I think you meant
> from stretch to buster.

You're correct. To be more precise the kernel is there the issue, so
that should even be upgrading from the stretch kernel to the buster
kernel.

> > > More precisely the board is a "Marvell Armada XP Development Board
> > > DB-MV784MP-GP"
> > > 
> > > > anymore. Using tcpdump on both the buildd and a remote host, it appears
> > > > that the packets correctly leave the board and that the reception side
> > > > fails.
> 
> If you can send to a remote host at least ARP (or ND) must be working,
> so some reception still works, right?

I have to try again, but what i have seen is the ARP requests from
hartmann arriving to the other hosts on the subnet. Steve McIntyre
(added in Cc:) confirmed me on IRC being able to reproduce the issue on
another board.

> > > > The module used for the ethernet device is mvneta. The corresponding DT
> > > > compatible entry is "marvell,armada-xp-neta".
> > > >
> > > 
> > > I have started a "bisection" with the kernels from snapshot. This is
> > > what I have found so far:
> > > 
> > > This one works:
> > > - linux-image-4.19.0-rc6-armmp-lpae_4.19~rc6-1~exp1_armhf.deb 
> > > 
> > > The following ones don't:
> > > - linux-image-4.19.0-rc7-armmp-lpae_4.19~rc7-1~exp1_armhf.deb
> > > - linux-image-5.0.0-trunk-armmp_5.0.2-1~exp1_armhf.deb
> > > 
> > > My guess (I don't have time to try more now) is that the issue is caused
> > > by the following change:
> > > 
> > > |  [ Uwe Kleine-König ]
> > > |  * [armhf] enable MVNETA_BM_ENABLE and CAN_FLEXCAN as a module
> > > 
> > 
> > I confirm this is the issue. Disabling MVNETA_BM_ENABLE on kernel 
> > 4.19.28-2 fixes the issue. Note that it breaks the ABI.
> 
> A colleague happens to work with an XP based machine with a (nearly)
> vanilla kernel based on 5.1.0-rc6 and there enabling MVNETA_BM_ENABLE
> doesn't render networking nonfunctional.
> 
> Looking through the changes to drivers/net/ethernet/marvell/mvneta*
> between 5.0 and 5.1-rc6 there isn't something that would explain a fix
> though. There doesn't seem to be a good explanation in the debian
> specific patches either.
> 
> So this problem is either machine specific or it works with the mvneta
> driver builtin. (I didn't double check, but guess that my colleague uses
> =y and the Debian kernel =m). Well, or I missed something.

Yes the debian kernel uses:
CONFIG_MVNETA_BM_ENABLE=m
CONFIG_MVNETA=m
CONFIG_MVNETA_BM=m

> Is it possible to test a few things on hartmann? I'd suggest:
> 
>  - try (vanilla) 5.1-rc6 with MVNETA=y
>  - try an older kernel (maybe 4.6 as the buffer manager stuff was
>    introduced in dc35a10f68d3 ("net: mvneta: bm: add support for
>    hardware buffer management") which made it into 4.6-rc1) with
>    MVNETA_BM_ENABLE=[ym].

Ok, I'll try that in the next days. I just do not have remote power,
only serial console, I hope the kernels will boot enough to be able to
roll back to another kernel.

Best regards,
Aurelien

-- 
Aurelien Jarno                          GPG: 4096R/1DDD8C9B
aurelien@...el32.net                 http://www.aurel32.net

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)