netdev - Re: [PATCH net-next v3 04/10] net: dsa: Allow drivers to filter packets they can decode source port from

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 5 May 2019 10:02:46 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Vladimir Oltean <olteanv@...il.com>, vivien.didelot@...il.com,
        andrew@...n.ch, davem@...emloft.net
Cc:     netdev@...r.kernel.org
Subject: Re: [PATCH net-next v3 04/10] net: dsa: Allow drivers to filter
 packets they can decode source port from



On 5/5/2019 3:19 AM, Vladimir Oltean wrote:
> Frames get processed by DSA and redirected to switch port net devices
> based on the ETH_P_XDSA multiplexed packet_type handler found by the
> network stack when calling eth_type_trans().
> 
> The running assumption is that once the DSA .rcv function is called, DSA
> is always able to decode the switch tag in order to change the skb->dev
> from its master.
> 
> However there are tagging protocols (such as the new DSA_TAG_PROTO_SJA1105,
> user of DSA_TAG_PROTO_8021Q) where this assumption is not completely
> true, since switch tagging piggybacks on the absence of a vlan_filtering
> bridge. Moreover, management traffic (BPDU, PTP) for this switch doesn't
> rely on switch tagging, but on a different mechanism. So it would make
> sense to at least be able to terminate that.
> 
> Having DSA receive traffic it can't decode would put it in an impossible
> situation: the eth_type_trans() function would invoke the DSA .rcv(),
> which could not change skb->dev, then eth_type_trans() would be invoked
> again, which again would call the DSA .rcv, and the packet would never
> be able to exit the DSA filter and would spiral in a loop until the
> whole system dies.
> 
> This happens because eth_type_trans() doesn't actually look at the skb
> (so as to identify a potential tag) when it deems it as being
> ETH_P_XDSA. It just checks whether skb->dev has a DSA private pointer
> installed (therefore it's a DSA master) and that there exists a .rcv
> callback (everybody except DSA_TAG_PROTO_NONE has that). This is
> understandable as there are many switch tags out there, and exhaustively
> checking for all of them is far from ideal.
> 
> The solution lies in introducing a filtering function for each tagging
> protocol. In the absence of a filtering function, all traffic is passed
> to the .rcv DSA callback. The tagging protocol should see the filtering
> function as a pre-validation that it can decode the incoming skb. The
> traffic that doesn't match the filter will bypass the DSA .rcv callback
> and be left on the master netdevice, which wasn't previously possible.
> 
> Signed-off-by: Vladimir Oltean <olteanv@...il.com>
> --
just one nit below:

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>

[snip]

> -	if (unlikely(netdev_uses_dsa(dev)))
> +	if (unlikely(netdev_uses_dsa(dev)) && dsa_can_decode(skb, dev))
>  		return htons(ETH_P_XDSA);

Just in case you need to resubmit, should not the dsa_can_decode() also
be part of the unlikely() statement here?

-- 
Florian