netdev - Re: [PATCH net-next 00/11] net: stmmac: Selftests

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 9 May 2019 11:04:16 +0200
From:   Corentin Labbe <clabbe.montjoie@...il.com>
To:     Jose Abreu <Jose.Abreu@...opsys.com>
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Joao Pinto <Joao.Pinto@...opsys.com>,
        "David S . Miller" <davem@...emloft.net>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>
Subject: Re: [PATCH net-next 00/11] net: stmmac: Selftests

On Wed, May 08, 2019 at 09:51:00AM +0200, Jose Abreu wrote:
> [ Submitting with net-next closed for proper review and testing. ]
> 
> This introduces selftests support in stmmac driver. We add 4 basic sanity
> checks and MAC loopback support for all cores within the driver. This way
> more tests can easily be added in the future and can be run in virtually
> any MAC/GMAC/QoS/XGMAC platform.
> 
> Having this we can find regressions and missing features in the driver
> while at the same time we can check if the IP is correctly working.
> 
> We have been using this for some time now and I do have more tests to
> submit in the feature. My experience is that although writing the tests
> adds more development time, the gain results are obvious.
> 
> I let this feature optional within the driver under a Kconfig option.
> 
> For this series the output result will be something like this
> (e.g. for dwmac1000):
> ----
> # ethtool -t eth0
> The test result is PASS
> The test extra info:
> 1. MAC Loopback                 0
> 2. PHY Loopback                 -95
> 3. MMC Counters                 0
> 4. EEE                          -95
> 5. Hash Filter MC               0
> 6. Perfect Filter UC            0
> 7. Flow Control                 0
> ----
> 
> (Error code -95 means EOPNOTSUPP in current HW).
> 

Hello

I have started to patch dwmac_sun8i for using your patchset and get the following:
The test result is FAIL
The test extra info:
 1. MAC Loopback         	 0
 2. PHY Loopback         	 -95
 3. MMC Counters         	 -95
 4. EEE                  	 -95
 5. Hash Filter MC       	 0
 6. Perfect Filter UC    	 1
 7. Flow Control         	 -95

What means 1 for "Perfect Filter UC" ?

I have added my patch below

Regards

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -976,6 +976,18 @@ static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
                regulator_disable(gmac->regulator);
 }
 
+static void sun8i_dwmac_set_mac_loopback(void __iomem *ioaddr, bool enable)
+{
+       u32 value = readl(ioaddr + EMAC_BASIC_CTL0);
+
+       if (enable)
+               value |= EMAC_LOOPBACK;
+       else
+               value &= ~EMAC_LOOPBACK;
+
+       writel(value, ioaddr + EMAC_BASIC_CTL0);
+}
+
 static const struct stmmac_ops sun8i_dwmac_ops = {
        .core_init = sun8i_dwmac_core_init,
        .set_mac = sun8i_dwmac_set_mac,
@@ -985,6 +997,7 @@ static const struct stmmac_ops sun8i_dwmac_ops = {
        .flow_ctrl = sun8i_dwmac_flow_ctrl,
        .set_umac_addr = sun8i_dwmac_set_umac_addr,
        .get_umac_addr = sun8i_dwmac_get_umac_addr,
+       .set_mac_loopback = sun8i_dwmac_set_mac_loopback,
 };
 
 static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)