netdev - [PATCH net] net: phy: realtek: Replace phy functions with non-locked version in rtl8211e_config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 13 May 2019 15:41:45 +0900
From:   Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        "David S. Miller" <davem@...emloft.net>
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Subject: [PATCH net] net: phy: realtek: Replace phy functions with non-locked version in rtl8211e_config_init()

After calling phy_select_page() and until calling phy_restore_page(),
the mutex 'mdio_lock' is already locked, so the driver should use
non-locked version of phy functions. Or there will be a deadlock with
'mdio_lock'.

This replaces phy functions called from rtl8211e_config_init() to avoid
the deadlock issue.

Fixes: f81dadbcf7fd ("net: phy: realtek: Add rtl8211e rx/tx delays config")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
---
 drivers/net/phy/realtek.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index e1f7a60..61fc76f 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -233,12 +233,12 @@ static int rtl8211e_config_init(struct phy_device *phydev)
 	if (oldpage < 0)
 		goto err_restore_page;
 
-	ret = phy_write(phydev, RTL821x_EXT_PAGE_SELECT, 0xa4);
+	ret = __phy_write(phydev, RTL821x_EXT_PAGE_SELECT, 0xa4);
 	if (ret)
 		goto err_restore_page;
 
-	ret = phy_modify(phydev, 0x1c, RTL8211E_TX_DELAY | RTL8211E_RX_DELAY,
-			 val);
+	ret = __phy_modify(phydev, 0x1c, RTL8211E_TX_DELAY | RTL8211E_RX_DELAY,
+			   val);
 
 err_restore_page:
 	return phy_restore_page(phydev, oldpage, ret);
-- 
2.7.4