lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 16 May 2019 14:52:22 +0000
From:   Igor Russkikh <Igor.Russkikh@...antia.com>
To:     "David S . Miller" <davem@...emloft.net>
CC:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        Oliver Neukum <oneukum@...e.com>,
        Dmitry Bezrukov <Dmitry.Bezrukov@...antia.com>,
        Igor Russkikh <Igor.Russkikh@...antia.com>
Subject: [PATCH net 2/3] Revert "aqc111: fix writing to the phy on BE"

This reverts commit 369b46e9fbcfa5136f2cb5f486c90e5f7fa92630.

The required temporary storage is already done inside of write32/16
helpers.

Signed-off-by: Igor Russkikh <igor.russkikh@...antia.com>
---
 drivers/net/usb/aqc111.c | 23 ++++++-----------------
 1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index 599d560a8450..408df2d335e3 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -320,7 +320,6 @@ static int aqc111_get_link_ksettings(struct net_device *net,
 static void aqc111_set_phy_speed(struct usbnet *dev, u8 autoneg, u16 speed)
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
-	u32 phy_on_the_wire;
 
 	aqc111_data->phy_cfg &= ~AQ_ADV_MASK;
 	aqc111_data->phy_cfg |= AQ_PAUSE;
@@ -362,8 +361,7 @@ static void aqc111_set_phy_speed(struct usbnet *dev, u8 autoneg, u16 speed)
 		}
 	}
 
-	phy_on_the_wire = aqc111_data->phy_cfg;
-	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, &phy_on_the_wire);
+	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, &aqc111_data->phy_cfg);
 }
 
 static int aqc111_set_link_ksettings(struct net_device *net,
@@ -757,7 +755,6 @@ static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf)
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u16 reg16;
-	u32 phy_on_the_wire;
 
 	/* Force bz */
 	reg16 = SFR_PHYPWR_RSTCTL_BZ;
@@ -771,9 +768,8 @@ static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf)
 	aqc111_data->phy_cfg &= ~AQ_ADV_MASK;
 	aqc111_data->phy_cfg |= AQ_LOW_POWER;
 	aqc111_data->phy_cfg &= ~AQ_PHY_POWER_EN;
-	phy_on_the_wire = aqc111_data->phy_cfg;
 	aqc111_write32_cmd_nopm(dev, AQ_PHY_OPS, 0, 0,
-				&phy_on_the_wire);
+				&aqc111_data->phy_cfg);
 
 	kfree(aqc111_data);
 }
@@ -996,7 +992,6 @@ static int aqc111_reset(struct usbnet *dev)
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u8 reg8 = 0;
-	u32 phy_on_the_wire;
 
 	dev->rx_urb_size = URB_SIZE;
 
@@ -1009,9 +1004,8 @@ static int aqc111_reset(struct usbnet *dev)
 
 	/* Power up ethernet PHY */
 	aqc111_data->phy_cfg = AQ_PHY_POWER_EN;
-	phy_on_the_wire = aqc111_data->phy_cfg;
 	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-			   &phy_on_the_wire);
+			   &aqc111_data->phy_cfg);
 
 	/* Set the MAC address */
 	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_NODE_ID, ETH_ALEN,
@@ -1042,7 +1036,6 @@ static int aqc111_stop(struct usbnet *dev)
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u16 reg16 = 0;
-	u32 phy_on_the_wire;
 
 	aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
 			  2, &reg16);
@@ -1054,9 +1047,8 @@ static int aqc111_stop(struct usbnet *dev)
 
 	/* Put PHY to low power*/
 	aqc111_data->phy_cfg |= AQ_LOW_POWER;
-	phy_on_the_wire = aqc111_data->phy_cfg;
 	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-			   &phy_on_the_wire);
+			   &aqc111_data->phy_cfg);
 
 	netif_carrier_off(dev->net);
 
@@ -1332,7 +1324,6 @@ static int aqc111_suspend(struct usb_interface *intf, pm_message_t message)
 	u16 temp_rx_ctrl = 0x00;
 	u16 reg16;
 	u8 reg8;
-	u32 phy_on_the_wire;
 
 	usbnet_suspend(intf, message);
 
@@ -1404,14 +1395,12 @@ static int aqc111_suspend(struct usb_interface *intf, pm_message_t message)
 
 		aqc111_write_cmd(dev, AQ_WOL_CFG, 0, 0,
 				 WOL_CFG_SIZE, &wol_cfg);
-		phy_on_the_wire = aqc111_data->phy_cfg;
 		aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-				   &phy_on_the_wire);
+				   &aqc111_data->phy_cfg);
 	} else {
 		aqc111_data->phy_cfg |= AQ_LOW_POWER;
-		phy_on_the_wire = aqc111_data->phy_cfg;
 		aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-				   &phy_on_the_wire);
+				   &aqc111_data->phy_cfg);
 
 		/* Disable RX path */
 		aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC,
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ