lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 16 May 2019 15:02:18 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     "Nikunj Kela (nkela)" <nkela@...co.com>,
        "jeffrey.t.kirsher@...el.com" <jeffrey.t.kirsher@...el.com>
Cc:     "xe-linux-external(mailer list)" <xe-linux-external@...co.com>,
        "David S. Miller" <davem@...emloft.net>,
        "intel-wired-lan@...ts.osuosl.org" <intel-wired-lan@...ts.osuosl.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] igb: add parameter to ignore nvm checksum validation

On 5/16/19 12:55 PM, Nikunj Kela (nkela) wrote:
> 
> 
> On 5/16/19, 12:35 PM, "Jeff Kirsher" <jeffrey.t.kirsher@...el.com> wrote:
> 
>     On Wed, 2019-05-08 at 23:14 +0000, Nikunj Kela wrote:
>    >> Some of the broken NICs don't have EEPROM programmed correctly. It
>    >> results
>    >> in probe to fail. This change adds a module parameter that can be
>    >> used to
>    >> ignore nvm checksum validation.
>    >> 
>    >> Cc: xe-linux-external@...co.com
>    >> Signed-off-by: Nikunj Kela <nkela@...co.com>
>    >> ---
>    >>  drivers/net/ethernet/intel/igb/igb_main.c | 28
>    >> ++++++++++++++++++++++------
>    >>  1 file changed, 22 insertions(+), 6 deletions(-)
>     
>     >NAK for two reasons.  First, module parameters are not desirable
>     >because their individual to one driver and a global solution should be
>     >found so that all networking device drivers can use the solution.  This
>     >will keep the interface to change/setup/modify networking drivers
>     >consistent for all drivers.
> 
>     
>     >Second and more importantly, if your NIC is broken, fix it.  Do not try
>     >and create a software workaround so that you can continue to use a
>     >broken NIC.  There are methods/tools available to properly reprogram
>     >the EEPROM on a NIC, which is the right solution for your issue.
> 
> I am proposing this as a debug parameter. Obviously, we need to fix EEPROM but this helps us continuing the development while manufacturing fixes NIC.

Then why even bother with sending this upstream?
-- 
Florian

Powered by blists - more mailing lists