| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <ba1a5d8ad34a8c9ab99f504c04fbe65bde42081b.1558605170.git-series.maxime.ripard@bootlin.com>
Date: Thu, 23 May 2019 11:56:49 +0200
From: Maxime Ripard <maxime.ripard@...tlin.com>
To: Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Frank Rowand <frowand.list@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Chen-Yu Tsai <wens@...e.org>,
Maxime Ripard <maxime.ripard@...tlin.com>
Cc: Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Antoine Ténart <antoine.tenart@...tlin.com>
Subject: [PATCH 6/8] dt-bindings: net: stmmac: Convert the binding to a schemas
Switch the STMMAC / Synopsys DesignWare MAC controller binding to a YAML
schema to enable the DT validation.
Signed-off-by: Maxime Ripard <maxime.ripard@...tlin.com>
---
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 344 +++++++++++-
Documentation/devicetree/bindings/net/stmmac.txt | 179 +------
2 files changed, 345 insertions(+), 178 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/snps,dwmac.yaml
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
new file mode 100644
index 000000000000..be3ada5121e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -0,0 +1,344 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/snps,dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare MAC Device Tree Bindings
+
+maintainers:
+ - Alexandre Torgue <alexandre.torgue@...com>
+ - Giuseppe Cavallaro <peppe.cavallaro@...com>
+ - Jose Abreu <joabreu@...opsys.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: snps,dwmac
+ - const: snps,dwmac-3.50a
+ - const: snps,dwmac-3.610
+ - const: snps,dwmac-3.70a
+ - const: snps,dwmac-3.710
+ - const: snps,dwmac-4.00
+ - const: snps,dwmac-4.10a
+ - const: snps,dwxgmac
+ - const: snps,dwxgmac-2.10
+ - const: st,spear600-gmac
+ description: Deprecated
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: Combined signal for various interrupt events
+ - description: The interrupt to manage the remote wake-up packet detection
+ - description: The interrupt that occurs when Rx exits the LPI state
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 3
+ items:
+ - const: macirq
+ - const: eth_wake_irq
+ - const: eth_lpi
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: GMAC main clock
+ - description: Peripheral registers interface clock
+ - description:
+ PTP reference clock. This clock is used for programming the
+ Timestamp Addend Register. If not passed then the system
+ clock will be used and this is fine on some platforms.
+
+ clock-names:
+ additionalItems: true
+ contains:
+ enum:
+ - stmmaceth
+ - pclk
+ - ptp_ref
+
+ resets:
+ maxItems: 1
+ description:
+ MAC Reset signal.
+
+ reset-names:
+ const: stmmaceth
+
+ snps,axi-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ AXI BUS Mode parameters. Phandle to a node that can contain the
+ following properties
+ * snps,lpi_en, enable Low Power Interface
+ * snps,xit_frm, unlock on WoL
+ * snps,wr_osr_lmt, max write outstanding req. limit
+ * snps,rd_osr_lmt, max read outstanding req. limit
+ * snps,kbbe, do not cross 1KiB boundary.
+ * snps,blen, this is a vector of supported burst length.
+ * snps,fb, fixed-burst
+ * snps,mb, mixed-burst
+ * snps,rb, rebuild INCRx Burst
+
+ snps,mtl-rx-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Multiple RX Queues parameters. Phandle to a node that can
+ contain the following properties
+ * snps,rx-queues-to-use, number of RX queues to be used in the
+ driver
+ * Choose one of these RX scheduling algorithms
+ * snps,rx-sched-sp, Strict priority
+ * snps,rx-sched-wsp, Weighted Strict priority
+ * For each RX queue
+ * Choose one of these modes
+ * snps,dcb-algorithm, Queue to be enabled as DCB
+ * snps,avb-algorithm, Queue to be enabled as AVB
+ * snps,map-to-dma-channel, Channel to map
+ * Specifiy specific packet routing
+ * snps,route-avcp, AV Untagged Control packets
+ * snps,route-ptp, PTP Packets
+ * snps,route-dcbcp, DCB Control Packets
+ * snps,route-up, Untagged Packets
+ * snps,route-multi-broad, Multicast & Broadcast Packets
+ * snps,priority, RX queue priority (Range 0x0 to 0xF)
+
+ snps,mtl-tx-config:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ Multiple TX Queues parameters. Phandle to a node that can
+ contain the following properties
+ * snps,tx-queues-to-use, number of TX queues to be used in the
+ driver
+ * Choose one of these TX scheduling algorithms
+ * snps,tx-sched-wrr, Weighted Round Robin
+ * snps,tx-sched-wfq, Weighted Fair Queuing
+ * snps,tx-sched-dwrr, Deficit Weighted Round Robin
+ * snps,tx-sched-sp, Strict priority
+ * For each TX queue
+ * snps,weight, TX queue weight (if using a DCB weight
+ algorithm)
+ * Choose one of these modes
+ * snps,dcb-algorithm, TX queue will be working in DCB
+ * snps,avb-algorithm, TX queue will be working in AVB
+ [Attention] Queue 0 is reserved for legacy traffic
+ and so no AVB is available in this queue.
+ * Configure Credit Base Shaper (if AVB Mode selected)
+ * snps,send_slope, enable Low Power Interface
+ * snps,idle_slope, unlock on WoL
+ * snps,high_credit, max write outstanding req. limit
+ * snps,low_credit, max read outstanding req. limit
+ * snps,priority, TX queue priority (Range 0x0 to 0xF)
+
+ snps,reset-gpio:
+ description:
+ PHY Reset GPIO
+
+ snps,reset-active-low:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that the PHY Reset is active low
+
+ snps,reset-delay-us:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32-array
+ - minItems: 3
+ maxItems: 3
+ description:
+ Triplet of delays. The 1st cell is reset pre-delay in micro
+ seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
+ cell is reset post-delay in micro seconds.
+
+ snps,aal:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Use Address-Aligned Beats
+
+ snps,fixed-burst:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Program the DMA to use the fixed burst mode
+
+ snps,mixed-burst:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Program the DMA to use the mixed burst mode
+
+ snps,force_thresh_dma_mode:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Force DMA to use the threshold mode for both tx and rx
+
+ snps,force_sf_dma_mode:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Force DMA to use the Store and Forward mode for both tx and
+ rx. This flag is ignored if force_thresh_dma_mode is set.
+
+ snps,en-tx-lpi-clockgating:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Enable gating of the MAC TX clock during TX low-power mode
+
+ snps,multicast-filter-bins:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Number of multicast filter hash bins supported by this device
+ instance
+
+ snps,perfect-filter-entries:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Number of perfect filter entries supported by this device
+ instance
+
+ snps,ps-speed:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description:
+ Port selection speed that can be passed to the core when PCS
+ is supported. For example, this is used in case of SGMII and
+ MAC2MAC connection.
+
+ mdio:
+ type: object
+ description:
+ Creates and registers an MDIO bus.
+
+ properties:
+ compatible:
+ const: snps,dwmac-mdio
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - phy-mode
+
+dependencies:
+ snps,reset-active-low: ["snps,reset-gpio"]
+ snps,reset-delay-us: ["snps,reset-gpio"]
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ enum:
+ - snps,dwxgmac
+ - snps,dwxgmac-2.10
+ - st,spear600-gmac
+
+ then:
+ properties:
+ snps,pbl:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32-array
+ - enum: [2, 4, 8]
+ description:
+ Programmable Burst Length (tx and rx)
+
+ snps,txpbl:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32-array
+ - enum: [2, 4, 8]
+ description:
+ Tx Programmable Burst Length. If set, DMA tx will use this
+ value rather than snps,pbl.
+
+ snps,rxpbl:
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/uint32-array
+ - enum: [2, 4, 8]
+ description:
+ Rx Programmable Burst Length. If set, DMA rx will use this
+ value rather than snps,pbl.
+
+ snps,no-pbl-x8:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core
+ rev < 3.50, don\'t multiply the values by 4.
+
+ snps,tso:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Enables the TSO feature otherwise it will be managed by
+ MAC HW capability register. Only for GMAC4 and newer.
+
+examples:
+ - |
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <256 128 64 32 0 0 0>;
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ snps,rx-sched-sp;
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,priority = <0x0>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <2>;
+ snps,tx-sched-wrr;
+ queue0 {
+ snps,weight = <0x10>;
+ snps,dcb-algorithm;
+ snps,priority = <0x0>;
+ };
+
+ queue1 {
+ snps,avb-algorithm;
+ snps,send_slope = <0x1000>;
+ snps,idle_slope = <0x1000>;
+ snps,high_credit = <0x3E800>;
+ snps,low_credit = <0xFFC18000>;
+ snps,priority = <0x1>;
+ };
+ };
+
+ gmac0: ethernet@...00000 {
+ compatible = "st,spear600-gmac";
+ reg = <0xe0800000 0x8000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <24 23 22>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ mac-address = [000000000000]; /* Filled in by U-Boot */
+ max-frame-size = <3800>;
+ phy-mode = "gmii";
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <16384>;
+ tx-fifo-depth = <16384>;
+ clocks = <&clock>;
+ clock-names = "stmmaceth";
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@0 {
+ };
+ };
+ };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index cb694062afff..7d48782767cb 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -1,178 +1 @@
-* STMicroelectronics 10/100/1000/2500/10000 Ethernet (GMAC/XGMAC)
-
-Required properties:
-- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" or
- "snps,dwxgmac-<ip_version>", "snps,dwxgmac".
- For backwards compatibility: "st,spear600-gmac" is also supported.
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the STMMAC interrupts
-- interrupt-names: Should contain a list of interrupt names corresponding to
- the interrupts in the interrupts property, if available.
- Valid interrupt names are:
- - "macirq" (combined signal for various interrupt events)
- - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection)
- - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state)
-- phy-mode: See ethernet.txt file in the same directory.
-- snps,reset-gpio gpio number for phy reset.
-- snps,reset-active-low boolean flag to indicate if phy reset is active low.
-- snps,reset-delays-us is triplet of delays
- The 1st cell is reset pre-delay in micro seconds.
- The 2nd cell is reset pulse in micro seconds.
- The 3rd cell is reset post-delay in micro seconds.
-
-Optional properties:
-- resets: Should contain a phandle to the STMMAC reset signal, if any
-- reset-names: Should contain the reset signal name "stmmaceth", if a
- reset phandle is given
-- max-frame-size: See ethernet.txt file in the same directory
-- clocks: If present, the first clock should be the GMAC main clock and
- the second clock should be peripheral's register interface clock. Further
- clocks may be specified in derived bindings.
-- clock-names: One name for each entry in the clocks property, the
- first one should be "stmmaceth" and the second one should be "pclk".
-- ptp_ref: this is the PTP reference clock; in case of the PTP is available
- this clock is used for programming the Timestamp Addend Register. If not
- passed then the system clock will be used and this is fine on some
- platforms.
-- tx-fifo-depth: See ethernet.txt file in the same directory
-- rx-fifo-depth: See ethernet.txt file in the same directory
-- snps,pbl Programmable Burst Length (tx and rx)
-- snps,txpbl Tx Programmable Burst Length. Only for GMAC and newer.
- If set, DMA tx will use this value rather than snps,pbl.
-- snps,rxpbl Rx Programmable Burst Length. Only for GMAC and newer.
- If set, DMA rx will use this value rather than snps,pbl.
-- snps,no-pbl-x8 Don't multiply the pbl/txpbl/rxpbl values by 8.
- For core rev < 3.50, don't multiply the values by 4.
-- snps,aal Address-Aligned Beats
-- snps,fixed-burst Program the DMA to use the fixed burst mode
-- snps,mixed-burst Program the DMA to use the mixed burst mode
-- snps,force_thresh_dma_mode Force DMA to use the threshold mode for
- both tx and rx
-- snps,force_sf_dma_mode Force DMA to use the Store and Forward
- mode for both tx and rx. This flag is
- ignored if force_thresh_dma_mode is set.
-- snps,en-tx-lpi-clockgating Enable gating of the MAC TX clock during
- TX low-power mode
-- snps,multicast-filter-bins: Number of multicast filter hash bins
- supported by this device instance
-- snps,perfect-filter-entries: Number of perfect filter entries supported
- by this device instance
-- snps,ps-speed: port selection speed that can be passed to the core when
- PCS is supported. For example, this is used in case of SGMII
- and MAC2MAC connection.
-- snps,tso: this enables the TSO feature otherwise it will be managed by
- MAC HW capability register. Only for GMAC4 and newer.
-- AXI BUS Mode parameters: below the list of all the parameters to program the
- AXI register inside the DMA module:
- - snps,lpi_en: enable Low Power Interface
- - snps,xit_frm: unlock on WoL
- - snps,wr_osr_lmt: max write outstanding req. limit
- - snps,rd_osr_lmt: max read outstanding req. limit
- - snps,kbbe: do not cross 1KiB boundary.
- - snps,blen: this is a vector of supported burst length.
- - snps,fb: fixed-burst
- - snps,mb: mixed-burst
- - snps,rb: rebuild INCRx Burst
-- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
-- Multiple RX Queues parameters: below the list of all the parameters to
- configure the multiple RX queues:
- - snps,rx-queues-to-use: number of RX queues to be used in the driver
- - Choose one of these RX scheduling algorithms:
- - snps,rx-sched-sp: Strict priority
- - snps,rx-sched-wsp: Weighted Strict priority
- - For each RX queue
- - Choose one of these modes:
- - snps,dcb-algorithm: Queue to be enabled as DCB
- - snps,avb-algorithm: Queue to be enabled as AVB
- - snps,map-to-dma-channel: Channel to map
- - Specifiy specific packet routing:
- - snps,route-avcp: AV Untagged Control packets
- - snps,route-ptp: PTP Packets
- - snps,route-dcbcp: DCB Control Packets
- - snps,route-up: Untagged Packets
- - snps,route-multi-broad: Multicast & Broadcast Packets
- - snps,priority: RX queue priority (Range: 0x0 to 0xF)
-- Multiple TX Queues parameters: below the list of all the parameters to
- configure the multiple TX queues:
- - snps,tx-queues-to-use: number of TX queues to be used in the driver
- - Choose one of these TX scheduling algorithms:
- - snps,tx-sched-wrr: Weighted Round Robin
- - snps,tx-sched-wfq: Weighted Fair Queuing
- - snps,tx-sched-dwrr: Deficit Weighted Round Robin
- - snps,tx-sched-sp: Strict priority
- - For each TX queue
- - snps,weight: TX queue weight (if using a DCB weight algorithm)
- - Choose one of these modes:
- - snps,dcb-algorithm: TX queue will be working in DCB
- - snps,avb-algorithm: TX queue will be working in AVB
- [Attention] Queue 0 is reserved for legacy traffic
- and so no AVB is available in this queue.
- - Configure Credit Base Shaper (if AVB Mode selected):
- - snps,send_slope: enable Low Power Interface
- - snps,idle_slope: unlock on WoL
- - snps,high_credit: max write outstanding req. limit
- - snps,low_credit: max read outstanding req. limit
- - snps,priority: TX queue priority (Range: 0x0 to 0xF)
-Examples:
-
- stmmac_axi_setup: stmmac-axi-config {
- snps,wr_osr_lmt = <0xf>;
- snps,rd_osr_lmt = <0xf>;
- snps,blen = <256 128 64 32 0 0 0>;
- };
-
- mtl_rx_setup: rx-queues-config {
- snps,rx-queues-to-use = <1>;
- snps,rx-sched-sp;
- queue0 {
- snps,dcb-algorithm;
- snps,map-to-dma-channel = <0x0>;
- snps,priority = <0x0>;
- };
- };
-
- mtl_tx_setup: tx-queues-config {
- snps,tx-queues-to-use = <2>;
- snps,tx-sched-wrr;
- queue0 {
- snps,weight = <0x10>;
- snps,dcb-algorithm;
- snps,priority = <0x0>;
- };
-
- queue1 {
- snps,avb-algorithm;
- snps,send_slope = <0x1000>;
- snps,idle_slope = <0x1000>;
- snps,high_credit = <0x3E800>;
- snps,low_credit = <0xFFC18000>;
- snps,priority = <0x1>;
- };
- };
-
- gmac0: ethernet@...00000 {
- compatible = "st,spear600-gmac";
- reg = <0xe0800000 0x8000>;
- interrupt-parent = <&vic1>;
- interrupts = <24 23 22>;
- interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
- mac-address = [000000000000]; /* Filled in by U-Boot */
- max-frame-size = <3800>;
- phy-mode = "gmii";
- snps,multicast-filter-bins = <256>;
- snps,perfect-filter-entries = <128>;
- rx-fifo-depth = <16384>;
- tx-fifo-depth = <16384>;
- clocks = <&clock>;
- clock-names = "stmmaceth";
- snps,axi-config = <&stmmac_axi_setup>;
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- phy1: ethernet-phy@0 {
- };
- };
- snps,mtl-rx-config = <&mtl_rx_setup>;
- snps,mtl-tx-config = <&mtl_tx_setup>;
- };
+This file has moved to snps,dwmac.yaml.
--
git-series 0.9.1
Powered by blists - more mailing lists