netdev - Re: [PATCH V2] net: phy: tja11xx: Add IRQ support to the driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <96793717-a55c-7844-f7c0-cc357c774a19@gmail.com>
Date:   Tue, 28 May 2019 21:28:08 +0200
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Marek Vasut <marex@...x.de>, netdev@...r.kernel.org
Cc:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Jean Delvare <jdelvare@...e.com>, linux-hwmon@...r.kernel.org
Subject: Re: [PATCH V2] net: phy: tja11xx: Add IRQ support to the driver

On 28.05.2019 21:23, Marek Vasut wrote:
> Add support for handling the TJA11xx PHY IRQ signal.
> 
> Signed-off-by: Marek Vasut <marex@...x.de>
> Cc: Andrew Lunn <andrew@...n.ch>
> Cc: Florian Fainelli <f.fainelli@...il.com>
> Cc: Guenter Roeck <linux@...ck-us.net>
> Cc: Heiner Kallweit <hkallweit1@...il.com>
> Cc: Jean Delvare <jdelvare@...e.com>
> Cc: linux-hwmon@...r.kernel.org
> ---
> V2: - Define each bit of the MII_INTEN register and a mask
>     - Drop IRQ acking from tja11xx_config_intr()
> ---
>  drivers/net/phy/nxp-tja11xx.c | 48 +++++++++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
> index b705d0bd798b..b41af609607d 100644
> --- a/drivers/net/phy/nxp-tja11xx.c
> +++ b/drivers/net/phy/nxp-tja11xx.c
> @@ -40,6 +40,29 @@
>  #define MII_INTSRC_TEMP_ERR		BIT(1)
>  #define MII_INTSRC_UV_ERR		BIT(3)
>  
> +#define MII_INTEN			22
> +#define MII_INTEN_PWON_EN		BIT(15)
> +#define MII_INTEN_WAKEUP_EN		BIT(14)
> +#define MII_INTEN_PHY_INIT_FAIL_EN	BIT(11)
> +#define MII_INTEN_LINK_STATUS_FAIL_EN	BIT(10)
> +#define MII_INTEN_LINK_STATUS_UP_EN	BIT(9)
> +#define MII_INTEN_SYM_ERR_EN		BIT(8)
> +#define MII_INTEN_TRAINING_FAILED_EN	BIT(7)
> +#define MII_INTEN_SQI_WARNING_EN	BIT(6)
> +#define MII_INTEN_CONTROL_ERR_EN	BIT(5)
> +#define MII_INTEN_UV_ERR_EN		BIT(3)
> +#define MII_INTEN_UV_RECOVERY_EN	BIT(2)
> +#define MII_INTEN_TEMP_ERR_EN		BIT(1)
> +#define MII_INTEN_SLEEP_ABORT_EN	BIT(0)
> +#define MII_INTEN_MASK							\
> +	(MII_INTEN_PWON_EN | MII_INTEN_WAKEUP_EN |			\
> +	MII_INTEN_PHY_INIT_FAIL_EN | MII_INTEN_LINK_STATUS_FAIL_EN |	\
> +	MII_INTEN_LINK_STATUS_UP_EN | MII_INTEN_SYM_ERR_EN |		\
> +	MII_INTEN_TRAINING_FAILED_EN | MII_INTEN_SQI_WARNING_EN |	\
> +	MII_INTEN_CONTROL_ERR_EN | MII_INTEN_UV_ERR_EN |		\
> +	MII_INTEN_UV_RECOVERY_EN | MII_INTEN_TEMP_ERR_EN |		\
> +	MII_INTEN_SLEEP_ABORT_EN)

Why do you enable all these interrupt sources? As I said, phylib needs
link change info only.

> +
>  #define MII_COMMSTAT			23
>  #define MII_COMMSTAT_LINK_UP		BIT(15)
>  
> @@ -239,6 +262,25 @@ static int tja11xx_read_status(struct phy_device *phydev)
>  	return 0;
>  }
>  
> +static int tja11xx_config_intr(struct phy_device *phydev)
> +{
> +	int ret;
> +
> +	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> +		ret = phy_write(phydev, MII_INTEN, MII_INTEN_MASK);
> +	else
> +		ret = phy_write(phydev, MII_INTEN, 0);
> +
> +	return ret < 0 ? ret : 0;

phy_write returns only 0 or negative errno. You don't need
variable ret.

> +}
> +
> +static int tja11xx_ack_interrupt(struct phy_device *phydev)
> +{
> +	int ret = phy_read(phydev, MII_INTSRC);
> +
> +	return ret < 0 ? ret : 0;
> +}
> +
>  static int tja11xx_get_sset_count(struct phy_device *phydev)
>  {
>  	return ARRAY_SIZE(tja11xx_hw_stats);
> @@ -366,6 +408,9 @@ static struct phy_driver tja11xx_driver[] = {
>  		.suspend	= genphy_suspend,
>  		.resume		= genphy_resume,
>  		.set_loopback   = genphy_loopback,
> +		/* IRQ related */
> +		.config_intr	= tja11xx_config_intr,
> +		.ack_interrupt	= tja11xx_ack_interrupt,
>  		/* Statistics */
>  		.get_sset_count = tja11xx_get_sset_count,
>  		.get_strings	= tja11xx_get_strings,
> @@ -381,6 +426,9 @@ static struct phy_driver tja11xx_driver[] = {
>  		.suspend	= genphy_suspend,
>  		.resume		= genphy_resume,
>  		.set_loopback   = genphy_loopback,
> +		/* IRQ related */
> +		.config_intr	= tja11xx_config_intr,
> +		.ack_interrupt	= tja11xx_ack_interrupt,
>  		/* Statistics */
>  		.get_sset_count = tja11xx_get_sset_count,
>  		.get_strings	= tja11xx_get_strings,
>