lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list] 
Message-ID: <1559034182-24737-10-git-send-email-tanhuazhong@huawei.com>
Date:   Tue, 28 May 2019 17:02:59 +0800
From:   Huazhong Tan <tanhuazhong@...wei.com>
To:     <davem@...emloft.net>
CC:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <salil.mehta@...wei.com>, <yisen.zhuang@...wei.com>,
        <linuxarm@...wei.com>, Huazhong Tan <tanhuazhong@...wei.com>,
        Peng Li <lipeng321@...wei.com>
Subject: [PATCH net-next 09/12] net: hns3: add handshake with hardware while doing reset

When reset happens, the hardware reset should begin after the
driver has finished its preparatory work, otherwise it may cause
some hardware error.

Before Hardware's reset, it will wait for the driver to write
bit HCLGE_NIC_CMQ_ENABLE of register HCLGE_NIC_CSQ_DEPTH_REG
to 1, while the driver finishes its preparatory work will do that.
BTW, since some cases this register will be cleared, so it needs
some sync time before driver's writing.

Signed-off-by: Huazhong Tan <tanhuazhong@...wei.com>
Signed-off-by: Peng Li <lipeng321@...wei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c    |  6 ++----
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c   | 10 ++++++++--
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c  |  2 --
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c |  7 ++++++-
 4 files changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
index fbd904e..e532905 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
@@ -110,8 +110,7 @@ static void hclge_cmd_config_regs(struct hclge_cmq_ring *ring)
 		hclge_write_dev(hw, HCLGE_NIC_CSQ_BASEADDR_H_REG,
 				upper_32_bits(dma));
 		hclge_write_dev(hw, HCLGE_NIC_CSQ_DEPTH_REG,
-				(ring->desc_num >> HCLGE_NIC_CMQ_DESC_NUM_S) |
-				HCLGE_NIC_CMQ_ENABLE);
+				ring->desc_num >> HCLGE_NIC_CMQ_DESC_NUM_S);
 		hclge_write_dev(hw, HCLGE_NIC_CSQ_HEAD_REG, 0);
 		hclge_write_dev(hw, HCLGE_NIC_CSQ_TAIL_REG, 0);
 	} else {
@@ -120,8 +119,7 @@ static void hclge_cmd_config_regs(struct hclge_cmq_ring *ring)
 		hclge_write_dev(hw, HCLGE_NIC_CRQ_BASEADDR_H_REG,
 				upper_32_bits(dma));
 		hclge_write_dev(hw, HCLGE_NIC_CRQ_DEPTH_REG,
-				(ring->desc_num >> HCLGE_NIC_CMQ_DESC_NUM_S) |
-				HCLGE_NIC_CMQ_ENABLE);
+				ring->desc_num >> HCLGE_NIC_CMQ_DESC_NUM_S);
 		hclge_write_dev(hw, HCLGE_NIC_CRQ_HEAD_REG, 0);
 		hclge_write_dev(hw, HCLGE_NIC_CRQ_TAIL_REG, 0);
 	}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index b7106a5..a563815 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -3197,6 +3197,8 @@ static int hclge_reset_prepare_down(struct hclge_dev *hdev)
 
 static int hclge_reset_prepare_wait(struct hclge_dev *hdev)
 {
+#define HCLGE_RESET_SYNC_TIME 100
+
 	u32 reg_val;
 	int ret = 0;
 
@@ -3205,7 +3207,7 @@ static int hclge_reset_prepare_wait(struct hclge_dev *hdev)
 		/* There is no mechanism for PF to know if VF has stopped IO
 		 * for now, just wait 100 ms for VF to stop IO
 		 */
-		msleep(100);
+		msleep(HCLGE_RESET_SYNC_TIME);
 		ret = hclge_func_reset_cmd(hdev, 0);
 		if (ret) {
 			dev_err(&hdev->pdev->dev,
@@ -3225,7 +3227,7 @@ static int hclge_reset_prepare_wait(struct hclge_dev *hdev)
 		/* There is no mechanism for PF to know if VF has stopped IO
 		 * for now, just wait 100 ms for VF to stop IO
 		 */
-		msleep(100);
+		msleep(HCLGE_RESET_SYNC_TIME);
 		set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
 		set_bit(HNAE3_FLR_DOWN, &hdev->flr_state);
 		hdev->rst_stats.flr_rst_cnt++;
@@ -3239,6 +3241,10 @@ static int hclge_reset_prepare_wait(struct hclge_dev *hdev)
 		break;
 	}
 
+	/* inform hardware that preparatory work is done */
+	msleep(HCLGE_RESET_SYNC_TIME);
+	hclge_write_dev(&hdev->hw, HCLGE_NIC_CSQ_DEPTH_REG,
+			HCLGE_NIC_CMQ_ENABLE);
 	dev_info(&hdev->pdev->dev, "prepare wait ok\n");
 
 	return ret;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c
index 71f356f..e1588c0 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c
@@ -98,7 +98,6 @@ static void hclgevf_cmd_config_regs(struct hclgevf_cmq_ring *ring)
 		hclgevf_write_dev(hw, HCLGEVF_NIC_CSQ_BASEADDR_H_REG, reg_val);
 
 		reg_val = (ring->desc_num >> HCLGEVF_NIC_CMQ_DESC_NUM_S);
-		reg_val |= HCLGEVF_NIC_CMQ_ENABLE;
 		hclgevf_write_dev(hw, HCLGEVF_NIC_CSQ_DEPTH_REG, reg_val);
 
 		hclgevf_write_dev(hw, HCLGEVF_NIC_CSQ_HEAD_REG, 0);
@@ -110,7 +109,6 @@ static void hclgevf_cmd_config_regs(struct hclgevf_cmq_ring *ring)
 		hclgevf_write_dev(hw, HCLGEVF_NIC_CRQ_BASEADDR_H_REG, reg_val);
 
 		reg_val = (ring->desc_num >> HCLGEVF_NIC_CMQ_DESC_NUM_S);
-		reg_val |= HCLGEVF_NIC_CMQ_ENABLE;
 		hclgevf_write_dev(hw, HCLGEVF_NIC_CRQ_DEPTH_REG, reg_val);
 
 		hclgevf_write_dev(hw, HCLGEVF_NIC_CRQ_HEAD_REG, 0);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 9d5a4f8..ee1eeca 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1414,6 +1414,8 @@ static int hclgevf_reset_stack(struct hclgevf_dev *hdev)
 
 static int hclgevf_reset_prepare_wait(struct hclgevf_dev *hdev)
 {
+#define HCLGEVF_RESET_SYNC_TIME 100
+
 	int ret = 0;
 
 	switch (hdev->reset_type) {
@@ -1431,7 +1433,10 @@ static int hclgevf_reset_prepare_wait(struct hclgevf_dev *hdev)
 	}
 
 	set_bit(HCLGEVF_STATE_CMD_DISABLE, &hdev->state);
-
+	/* inform hardware that preparatory work is done */
+	msleep(HCLGEVF_RESET_SYNC_TIME);
+	hclgevf_write_dev(&hdev->hw, HCLGEVF_NIC_CSQ_DEPTH_REG,
+			  HCLGEVF_NIC_CMQ_ENABLE);
 	dev_info(&hdev->pdev->dev, "prepare reset(%d) wait done, ret:%d\n",
 		 hdev->reset_type, ret);
 
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ