[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190528095639.kqalmvffsmc5ebs7@shell.armlinux.org.uk>
Date: Tue, 28 May 2019 10:56:39 +0100
From: Russell King - ARM Linux admin <linux@...linux.org.uk>
To: "David S. Miller" <davem@...emloft.net>
Cc: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>, netdev@...r.kernel.org,
Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH net-next 0/5] phylink/sfp updates
Hi,
This is a series of updates to phylink and sfp:
- Remove an unused net device argument from the phylink MII ioctl
emulation code.
- add support for using interrupts when using a GPIO for link status
tracking, rather than polling it at one second intervals. This
reduces the need to wakeup the CPU every second.
- add support to the MII ioctl API to read and write Clause 45 PHY
registers. I don't know how desirable this is for mainline, but I
have used this facility extensively to investigate the Marvell
88x3310 PHY. A recent illustration of use for this was debugging
the PHY-without-firmware problem recently reported.
- add mandatory attach/detach methods for the upstream side of sfp
bus code, which will allow us to remove the "netdev" structure from
the SFP layers.
- remove the "netdev" structure from the SFP upstream registration
calls, which simplifies PHY to SFP links.
drivers/net/phy/marvell10g.c | 101 +++++++++++++++++++++++++++++++++++++++++++
drivers/net/phy/phy.c | 33 ++++++++++----
drivers/net/phy/phylink.c | 75 ++++++++++++++++++++++++--------
drivers/net/phy/sfp-bus.c | 14 +++---
include/linux/sfp.h | 12 +++--
5 files changed, 195 insertions(+), 40 deletions(-)
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
Powered by blists - more mailing lists