[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1hVYrJ-0005ZA-0S@rmk-PC.armlinux.org.uk>
Date: Tue, 28 May 2019 10:57:29 +0100
From: Russell King <rmk+kernel@...linux.org.uk>
To: "David S. Miller" <davem@...emloft.net>
Cc: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>, netdev@...r.kernel.org
Subject: [PATCH net-next 3/5] net: phy: allow Clause 45 access via mii ioctl
Allow userspace to generate Clause 45 MII access cycles via phylib.
This is useful for tools such as mii-diag to be able to inspect Clause
45 PHYs.
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
drivers/net/phy/phy.c | 33 ++++++++++++++++++++++++---------
1 file changed, 24 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 3745220c5c98..6d279c2ac1f8 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -386,6 +386,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
struct mii_ioctl_data *mii_data = if_mii(ifr);
u16 val = mii_data->val_in;
bool change_autoneg = false;
+ int prtad, devad;
switch (cmd) {
case SIOCGMIIPHY:
@@ -393,14 +394,29 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
/* fall through */
case SIOCGMIIREG:
- mii_data->val_out = mdiobus_read(phydev->mdio.bus,
- mii_data->phy_id,
- mii_data->reg_num);
+ if (mdio_phy_id_is_c45(mii_data->phy_id)) {
+ prtad = mdio_phy_id_prtad(mii_data->phy_id);
+ devad = mdio_phy_id_devad(mii_data->phy_id);
+ devad = MII_ADDR_C45 | devad << 16 | mii_data->reg_num;
+ } else {
+ prtad = mii_data->phy_id;
+ devad = mii_data->reg_num;
+ }
+ mii_data->val_out = mdiobus_read(phydev->mdio.bus, prtad,
+ devad);
return 0;
case SIOCSMIIREG:
- if (mii_data->phy_id == phydev->mdio.addr) {
- switch (mii_data->reg_num) {
+ if (mdio_phy_id_is_c45(mii_data->phy_id)) {
+ prtad = mdio_phy_id_prtad(mii_data->phy_id);
+ devad = mdio_phy_id_devad(mii_data->phy_id);
+ devad = MII_ADDR_C45 | devad << 16 | mii_data->reg_num;
+ } else {
+ prtad = mii_data->phy_id;
+ devad = mii_data->reg_num;
+ }
+ if (prtad == phydev->mdio.addr) {
+ switch (devad) {
case MII_BMCR:
if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
if (phydev->autoneg == AUTONEG_ENABLE)
@@ -433,11 +449,10 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
}
}
- mdiobus_write(phydev->mdio.bus, mii_data->phy_id,
- mii_data->reg_num, val);
+ mdiobus_write(phydev->mdio.bus, prtad, devad, val);
- if (mii_data->phy_id == phydev->mdio.addr &&
- mii_data->reg_num == MII_BMCR &&
+ if (prtad == phydev->mdio.addr &&
+ devad == MII_BMCR &&
val & BMCR_RESET)
return phy_init_hw(phydev);
--
2.7.4
Powered by blists - more mailing lists