[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1559599037-8514-1-git-send-email-hancock@sedsystems.ca>
Date: Mon, 3 Jun 2019 15:56:59 -0600
From: Robert Hancock <hancock@...systems.ca>
To: netdev@...r.kernel.org
Cc: anirudh@...inx.com, John.Linn@...inx.com,
Robert Hancock <hancock@...systems.ca>
Subject: [PATCH net-next 00/18] Xilinx axienet driver updates (v2)
This is a series of enhancements and bug fixes in order to get the mainline
version of this driver into a more generally usable state, including on
x86 or ARM platforms. It also converts the driver to use the phylink API
in order to provide support for SFP modules.
Changes since v1:
-Split up some patches
-Removed IO accessor ifdefs
Robert Hancock (18):
net: axienet: Fix casting of pointers to u32
net: axienet: Use standard IO accessors
net: axienet: fix MDIO bus naming
net: axienet: add X86 and ARM as supported platforms
net: axienet: Allow explicitly setting MDIO clock divisor
net: axienet: fix teardown order of MDIO bus
net: axienet: Re-initialize MDIO registers properly after reset
net: axienet: Cleanup DMA device reset and halt process
net: axienet: Make RX/TX ring sizes configurable
net: axienet: Add DMA registers to ethtool register dump
net: axienet: Support shared interrupts
net: axienet: Add optional support for Ethernet core interrupt
net: axienet: Fix race condition causing TX hang
net: axienet: Make missing MAC address non-fatal
net: axienet: stop interface during shutdown
net: axienet: document axistream-connected attribute
net: axienet: make use of axistream-connected attribute optional
net: axienet: convert to phylink API
.../devicetree/bindings/net/xilinx_axienet.txt | 24 +-
drivers/net/ethernet/xilinx/Kconfig | 6 +-
drivers/net/ethernet/xilinx/xilinx_axienet.h | 35 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 652 ++++++++++++++-------
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 173 +++---
5 files changed, 592 insertions(+), 298 deletions(-)
--
1.8.3.1
Powered by blists - more mailing lists