netdev - [PATCH net-next v4 16/20] net: axienet: document device tree mdio child node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1559767353-17301-17-git-send-email-hancock@sedsystems.ca>
Date:   Wed,  5 Jun 2019 14:42:29 -0600
From:   Robert Hancock <hancock@...systems.ca>
To:     netdev@...r.kernel.org
Cc:     anirudh@...inx.com, John.Linn@...inx.com, andrew@...n.ch,
        Robert Hancock <hancock@...systems.ca>
Subject: [PATCH net-next v4 16/20] net: axienet: document device tree mdio child node

The mdio child node for the MDIO bus is generally required when using
this driver but was not documented other than being shown in the
example. Document it as an optional (but usually required) parameter.

Signed-off-by: Robert Hancock <hancock@...systems.ca>
---
 Documentation/devicetree/bindings/net/xilinx_axienet.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
index 0be335c..a8be67b 100644
--- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
+++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
@@ -37,6 +37,9 @@ Optional properties:
 		  auto-detected from the CPU clock (but only on platforms where
 		  this is possible). New device trees should specify this - the
 		  auto detection is only for backward compatibility.
+ - mdio		: Child node for MDIO bus. Must be defined if PHY access is
+		  required through the core's MDIO interface (i.e. always,
+		  unless the PHY is accessed through a different bus).
 
 Example:
 	axi_ethernet_eth: ethernet@...00000 {
-- 
1.8.3.1