netdev - Re: [PATCH net-next] net: phy: Add detection of 1000BaseX link mode support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Thu, 06 Jun 2019 13:49:08 -0700 (PDT)
From:   David Miller <davem@...emloft.net>
To:     hancock@...systems.ca
Cc:     netdev@...r.kernel.org, andrew@...n.ch, f.fainelli@...il.com,
        hkallweit1@...il.com
Subject: Re: [PATCH net-next] net: phy: Add detection of 1000BaseX link
 mode support

From: Robert Hancock <hancock@...systems.ca>
Date: Tue,  4 Jun 2019 16:15:01 -0600

> Add 1000BaseX to the link modes which are detected based on the
> MII_ESTATUS register as per 802.3 Clause 22. This allows PHYs which
> support 1000BaseX to work properly with drivers using phylink.
> 
> Previously 1000BaseX support was not detected, and if that was the only
> mode the PHY indicated support for, phylink would refuse to attach it
> due to the list of supported modes being empty.
> 
> Signed-off-by: Robert Hancock <hancock@...systems.ca>

Applied, thanks.