netdev - [net 7/7] net/mlx5e: Support tagged tunnel over bond

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190607214716.16316-8-saeedm@mellanox.com>
Date:   Fri, 7 Jun 2019 21:47:48 +0000
From:   Saeed Mahameed <saeedm@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
CC:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        Eli Britstein <elibr@...lanox.com>,
        Roi Dayan <roid@...lanox.com>,
        Saeed Mahameed <saeedm@...lanox.com>
Subject: [net 7/7] net/mlx5e: Support tagged tunnel over bond

From: Eli Britstein <elibr@...lanox.com>

Stacked devices like bond interface may have a VLAN device on top of
them. Detect lag state correctly under this condition, and return the
correct routed net device, according to it the encap header is built.

Fixes: e32ee6c78efa ("net/mlx5e: Support tunnel encap over tagged Ethernet")
Signed-off-by: Eli Britstein <elibr@...lanox.com>
Reviewed-by: Roi Dayan <roid@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
index fe5d4d7f15ed..231e7cdfc6f7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
@@ -11,24 +11,25 @@ static int get_route_and_out_devs(struct mlx5e_priv *priv,
 				  struct net_device **route_dev,
 				  struct net_device **out_dev)
 {
+	struct net_device *uplink_dev, *uplink_upper, *real_dev;
 	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
-	struct net_device *uplink_dev, *uplink_upper;
 	bool dst_is_lag_dev;
 
+	real_dev = is_vlan_dev(dev) ? vlan_dev_real_dev(dev) : dev;
 	uplink_dev = mlx5_eswitch_uplink_get_proto_dev(esw, REP_ETH);
 	uplink_upper = netdev_master_upper_dev_get(uplink_dev);
 	dst_is_lag_dev = (uplink_upper &&
 			  netif_is_lag_master(uplink_upper) &&
-			  dev == uplink_upper &&
+			  real_dev == uplink_upper &&
 			  mlx5_lag_is_sriov(priv->mdev));
 
 	/* if the egress device isn't on the same HW e-switch or
 	 * it's a LAG device, use the uplink
 	 */
-	if (!netdev_port_same_parent_id(priv->netdev, dev) ||
+	if (!netdev_port_same_parent_id(priv->netdev, real_dev) ||
 	    dst_is_lag_dev) {
-		*route_dev = uplink_dev;
-		*out_dev = *route_dev;
+		*route_dev = dev;
+		*out_dev = uplink_dev;
 	} else {
 		*route_dev = dev;
 		if (is_vlan_dev(*route_dev))
-- 
2.21.0