netdev - [PATCH v3 3/5] brcmfmac: sdio: Disable auto-tuning around commands expected to fail

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190607223716.119277-4-dianders@chromium.org>
Date:   Fri,  7 Jun 2019 15:37:14 -0700
From:   Douglas Anderson <dianders@...omium.org>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Kalle Valo <kvalo@...eaurora.org>,
        Adrian Hunter <adrian.hunter@...el.com>,
        Arend van Spriel <arend.vanspriel@...adcom.com>
Cc:     brcm80211-dev-list.pdl@...adcom.com,
        linux-rockchip@...ts.infradead.org,
        Double Lo <double.lo@...ress.com>, briannorris@...omium.org,
        linux-wireless@...r.kernel.org,
        Naveen Gupta <naveen.gupta@...ress.com>,
        Madhan Mohan R <madhanmohan.r@...ress.com>, mka@...omium.org,
        Wright Feng <wright.feng@...ress.com>,
        Chi-Hsien Lin <chi-hsien.lin@...ress.com>,
        netdev@...r.kernel.org, brcm80211-dev-list@...ress.com,
        Douglas Anderson <dianders@...omium.org>,
        Franky Lin <franky.lin@...adcom.com>,
        linux-kernel@...r.kernel.org,
        Madhan Mohan R <MadhanMohan.R@...ress.com>,
        Hante Meuleman <hante.meuleman@...adcom.com>,
        YueHaibing <yuehaibing@...wei.com>,
        "David S. Miller" <davem@...emloft.net>
Subject: [PATCH v3 3/5] brcmfmac: sdio: Disable auto-tuning around commands expected to fail

There are certain cases, notably when transitioning between sleep and
active state, when Broadcom SDIO WiFi cards will produce errors on the
SDIO bus.  This is evident from the source code where you can see that
we try commands in a loop until we either get success or we've tried
too many times.  The comment in the code reinforces this by saying
"just one write attempt may fail"

Unfortunately these failures sometimes end up causing an "-EILSEQ"
back to the core which triggers a retuning of the SDIO card and that
blocks all traffic to the card until it's done.

Let's disable retuning around the commands we expect might fail.

Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors")
Signed-off-by: Douglas Anderson <dianders@...omium.org>
---

Changes in v3:
- Expect errors for all of brcmf_sdio_kso_control() (Adrian).

Changes in v2: None

 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 4a750838d8cd..4040aae1f9ed 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -16,6 +16,7 @@
 #include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/core.h>
 #include <linux/semaphore.h>
 #include <linux/firmware.h>
 #include <linux/module.h>
@@ -667,6 +668,8 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 
 	brcmf_dbg(TRACE, "Enter: on=%d\n", on);
 
+	mmc_expect_errors_begin(bus->sdiodev->func1->card->host);
+
 	wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 	/* 1st KSO write goes to AOS wake up core if device is asleep  */
 	brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);
@@ -727,6 +730,8 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 	if (try_cnt > MAX_KSO_ATTEMPTS)
 		brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err);
 
+	mmc_expect_errors_end(bus->sdiodev->func1->card->host);
+
 	return err;
 }
 
-- 
2.22.0.rc2.383.gf4fbbf30c2-goog