netdev - Re: [PATCH net-next 1/1] net: phy: broadcom: Add genphy_suspend and genphy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <66020c50-cbb9-6ce4-c141-9f80ca1bf0c5@gmail.com>
Date:   Sun, 9 Jun 2019 18:32:52 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Vladimir Oltean <olteanv@...il.com>, hkallweit1@...il.com,
        andrew@...n.ch, davem@...emloft.net
Cc:     netdev@...r.kernel.org
Subject: Re: [PATCH net-next 1/1] net: phy: broadcom: Add genphy_suspend and
 genphy_resume for BCM5464



On 6/8/2019 6:53 AM, Vladimir Oltean wrote:
> This puts the quad PHY ports in power-down mode when the PHY transitions
> to the PHY_HALTED state.  It is likely that all the other PHYs support
> the BMCR_PDOWN bit, but I only have the BCM5464R to test.

Yes, they should all support that low power mode, but like you, only
have a limited subset to work with.

> 
> Signed-off-by: Vladimir Oltean <olteanv@...il.com>

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
-- 
Florian