[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <6226d6a0de5929ed07d64b20472c52a86e71383d.1560266175.git.joabreu@synopsys.com>
Date: Tue, 11 Jun 2019 17:18:47 +0200
From: Jose Abreu <Jose.Abreu@...opsys.com>
To: linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Cc: Jose Abreu <Jose.Abreu@...opsys.com>,
Joao Pinto <Joao.Pinto@...opsys.com>,
"David S . Miller" <davem@...emloft.net>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Russell King <linux@...linux.org.uk>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>
Subject: [PATCH net-next 3/3] net: stmmac: Convert to phylink and remove phylib logic
Convert everything to phylink.
Signed-off-by: Jose Abreu <joabreu@...opsys.com>
Cc: Joao Pinto <jpinto@...opsys.com>
Cc: David S. Miller <davem@...emloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: Alexandre Torgue <alexandre.torgue@...com>
Cc: Russell King <linux@...linux.org.uk>
Cc: Andrew Lunn <andrew@...n.ch>
Cc: Florian Fainelli <f.fainelli@...il.com>
Cc: Heiner Kallweit <hkallweit1@...il.com>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 2 -
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 -
.../ethernet/stmicro/stmmac/stmmac_ethtool.c | 81 +---
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 364 ++++++------------
.../ethernet/stmicro/stmmac/stmmac_platform.c | 21 +-
5 files changed, 132 insertions(+), 339 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index cf0c9f4f347a..c43e2da4e7e3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -3,7 +3,6 @@ config STMMAC_ETH
tristate "STMicroelectronics 10/100/1000/EQOS Ethernet driver"
depends on HAS_IOMEM && HAS_DMA
select MII
- select PHYLIB
select PHYLINK
select CRC32
imply PTP_1588_CLOCK
@@ -42,7 +41,6 @@ if STMMAC_PLATFORM
config DWMAC_DWC_QOS_ETH
tristate "Support for snps,dwc-qos-ethernet.txt DT binding."
- select PHYLIB
select CRC32
select MII
depends on OF && HAS_DMA
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b8386778f6c6..15523a4546f1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -24,7 +24,6 @@
#include <linux/clk.h>
#include <linux/stmmac.h>
-#include <linux/phy.h>
#include <linux/phylink.h>
#include <linux/pci.h>
#include "common.h"
@@ -148,9 +147,7 @@ struct stmmac_priv {
/* Generic channel for NAPI */
struct stmmac_channel channel[STMMAC_CH_MAX];
- bool oldlink;
int speed;
- int oldduplex;
unsigned int flow_ctrl;
unsigned int pause;
struct mii_bus *mii;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index cec51ba34296..7729aa555a19 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -22,7 +22,7 @@
#include <linux/ethtool.h>
#include <linux/interrupt.h>
#include <linux/mii.h>
-#include <linux/phy.h>
+#include <linux/phylink.h>
#include <linux/net_tstamp.h>
#include <asm/io.h>
@@ -274,7 +274,6 @@ static int stmmac_ethtool_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
struct stmmac_priv *priv = netdev_priv(dev);
- struct phy_device *phy = dev->phydev;
if (priv->hw->pcs & STMMAC_PCS_RGMII ||
priv->hw->pcs & STMMAC_PCS_SGMII) {
@@ -353,18 +352,7 @@ static int stmmac_ethtool_get_link_ksettings(struct net_device *dev,
return 0;
}
- if (phy == NULL) {
- pr_err("%s: %s: PHY is not registered\n",
- __func__, dev->name);
- return -ENODEV;
- }
- if (!netif_running(dev)) {
- pr_err("%s: interface is disabled: we cannot track "
- "link speed / duplex setting\n", dev->name);
- return -EBUSY;
- }
- phy_ethtool_ksettings_get(phy, cmd);
- return 0;
+ return phylink_ethtool_ksettings_get(priv->phylink, cmd);
}
static int
@@ -372,8 +360,6 @@ stmmac_ethtool_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
{
struct stmmac_priv *priv = netdev_priv(dev);
- struct phy_device *phy = dev->phydev;
- int rc;
if (priv->hw->pcs & STMMAC_PCS_RGMII ||
priv->hw->pcs & STMMAC_PCS_SGMII) {
@@ -397,9 +383,7 @@ stmmac_ethtool_set_link_ksettings(struct net_device *dev,
return 0;
}
- rc = phy_ethtool_ksettings_set(phy, cmd);
-
- return rc;
+ return phylink_ethtool_ksettings_set(priv->phylink, cmd);
}
static u32 stmmac_ethtool_getmsglevel(struct net_device *dev)
@@ -443,6 +427,13 @@ static void stmmac_ethtool_gregs(struct net_device *dev,
NUM_DWMAC1000_DMA_REGS * 4);
}
+static int stmmac_nway_reset(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ return phylink_ethtool_nway_reset(priv->phylink);
+}
+
static void
stmmac_get_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
@@ -450,28 +441,13 @@ stmmac_get_pauseparam(struct net_device *netdev,
struct stmmac_priv *priv = netdev_priv(netdev);
struct rgmii_adv adv_lp;
- pause->rx_pause = 0;
- pause->tx_pause = 0;
-
if (priv->hw->pcs && !stmmac_pcs_get_adv_lp(priv, priv->ioaddr, &adv_lp)) {
pause->autoneg = 1;
if (!adv_lp.pause)
return;
} else {
- if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- netdev->phydev->supported) ||
- !linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- netdev->phydev->supported))
- return;
+ phylink_ethtool_get_pauseparam(priv->phylink, pause);
}
-
- pause->autoneg = netdev->phydev->autoneg;
-
- if (priv->flow_ctrl & FLOW_RX)
- pause->rx_pause = 1;
- if (priv->flow_ctrl & FLOW_TX)
- pause->tx_pause = 1;
-
}
static int
@@ -479,39 +455,16 @@ stmmac_set_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
{
struct stmmac_priv *priv = netdev_priv(netdev);
- u32 tx_cnt = priv->plat->tx_queues_to_use;
- struct phy_device *phy = netdev->phydev;
- int new_pause = FLOW_OFF;
struct rgmii_adv adv_lp;
if (priv->hw->pcs && !stmmac_pcs_get_adv_lp(priv, priv->ioaddr, &adv_lp)) {
pause->autoneg = 1;
if (!adv_lp.pause)
return -EOPNOTSUPP;
+ return 0;
} else {
- if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- phy->supported) ||
- !linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- phy->supported))
- return -EOPNOTSUPP;
+ return phylink_ethtool_set_pauseparam(priv->phylink, pause);
}
-
- if (pause->rx_pause)
- new_pause |= FLOW_RX;
- if (pause->tx_pause)
- new_pause |= FLOW_TX;
-
- priv->flow_ctrl = new_pause;
- phy->autoneg = pause->autoneg;
-
- if (phy->autoneg) {
- if (netif_running(netdev))
- return phy_start_aneg(phy);
- }
-
- stmmac_flow_ctrl(priv, priv->hw, phy->duplex, priv->flow_ctrl,
- priv->pause, tx_cnt);
- return 0;
}
static void stmmac_get_ethtool_stats(struct net_device *dev,
@@ -549,7 +502,7 @@ static void stmmac_get_ethtool_stats(struct net_device *dev,
}
}
if (priv->eee_enabled) {
- int val = phy_get_eee_err(dev->phydev);
+ int val = phylink_get_eee_err(priv->phylink);
if (val)
priv->xstats.phy_eee_wakeup_error_n = val;
}
@@ -694,7 +647,7 @@ static int stmmac_ethtool_op_get_eee(struct net_device *dev,
edata->eee_active = priv->eee_active;
edata->tx_lpi_timer = priv->tx_lpi_timer;
- return phy_ethtool_get_eee(dev->phydev, edata);
+ return phylink_ethtool_get_eee(priv->phylink, edata);
}
static int stmmac_ethtool_op_set_eee(struct net_device *dev,
@@ -715,7 +668,7 @@ static int stmmac_ethtool_op_set_eee(struct net_device *dev,
return -EOPNOTSUPP;
}
- ret = phy_ethtool_set_eee(dev->phydev, edata);
+ ret = phylink_ethtool_set_eee(priv->phylink, edata);
if (ret)
return ret;
@@ -892,7 +845,7 @@ static const struct ethtool_ops stmmac_ethtool_ops = {
.get_regs = stmmac_ethtool_gregs,
.get_regs_len = stmmac_ethtool_get_regs_len,
.get_link = ethtool_op_get_link,
- .nway_reset = phy_ethtool_nway_reset,
+ .nway_reset = stmmac_nway_reset,
.get_pauseparam = stmmac_get_pauseparam,
.set_pauseparam = stmmac_set_pauseparam,
.self_test = stmmac_selftest_run,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e2e69cb08fef..ad007d8bf9d7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -328,21 +328,6 @@ static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv, u32 queue)
return dirty;
}
-/**
- * stmmac_hw_fix_mac_speed - callback for speed selection
- * @priv: driver private structure
- * Description: on some platforms (e.g. ST), some HW system configuration
- * registers have to be set according to the link speed negotiated.
- */
-static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
-{
- struct net_device *ndev = priv->dev;
- struct phy_device *phydev = ndev->phydev;
-
- if (likely(priv->plat->fix_mac_speed))
- priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed);
-}
-
/**
* stmmac_enable_eee_mode - check and enter in LPI mode
* @priv: driver private structure
@@ -406,14 +391,7 @@ static void stmmac_eee_ctrl_timer(struct timer_list *t)
*/
bool stmmac_eee_init(struct stmmac_priv *priv)
{
- struct net_device *ndev = priv->dev;
- int interface = priv->plat->interface;
- bool ret = false;
-
- if ((interface != PHY_INTERFACE_MODE_MII) &&
- (interface != PHY_INTERFACE_MODE_GMII) &&
- !phy_interface_mode_is_rgmii(interface))
- goto out;
+ int tx_lpi_timer = priv->tx_lpi_timer;
/* Using PCS we cannot dial with the phy registers at this stage
* so we do not support extra feature like EEE.
@@ -421,52 +399,32 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
if ((priv->hw->pcs == STMMAC_PCS_RGMII) ||
(priv->hw->pcs == STMMAC_PCS_TBI) ||
(priv->hw->pcs == STMMAC_PCS_RTBI))
- goto out;
-
- /* MAC core supports the EEE feature. */
- if (priv->dma_cap.eee) {
- int tx_lpi_timer = priv->tx_lpi_timer;
-
- /* Check if the PHY supports EEE */
- if (phy_init_eee(ndev->phydev, 1)) {
- /* To manage at run-time if the EEE cannot be supported
- * anymore (for example because the lp caps have been
- * changed).
- * In that case the driver disable own timers.
- */
- mutex_lock(&priv->lock);
- if (priv->eee_active) {
- netdev_dbg(priv->dev, "disable EEE\n");
- del_timer_sync(&priv->eee_ctrl_timer);
- stmmac_set_eee_timer(priv, priv->hw, 0,
- tx_lpi_timer);
- }
- priv->eee_active = 0;
- mutex_unlock(&priv->lock);
- goto out;
- }
- /* Activate the EEE and start timers */
- mutex_lock(&priv->lock);
- if (!priv->eee_active) {
- priv->eee_active = 1;
- timer_setup(&priv->eee_ctrl_timer,
- stmmac_eee_ctrl_timer, 0);
- mod_timer(&priv->eee_ctrl_timer,
- STMMAC_LPI_T(eee_timer));
-
- stmmac_set_eee_timer(priv, priv->hw,
- STMMAC_DEFAULT_LIT_LS, tx_lpi_timer);
- }
- /* Set HW EEE according to the speed */
- stmmac_set_eee_pls(priv, priv->hw, ndev->phydev->link);
+ return false;
- ret = true;
- mutex_unlock(&priv->lock);
+ /* Check if MAC core supports the EEE feature. */
+ if (!priv->dma_cap.eee)
+ return false;
+
+ mutex_lock(&priv->lock);
- netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n");
+ /* Check if it needs to be deactivated */
+ if (!priv->eee_active && priv->eee_enabled) {
+ netdev_dbg(priv->dev, "disable EEE\n");
+ del_timer_sync(&priv->eee_ctrl_timer);
+ stmmac_set_eee_timer(priv, priv->hw, 0, tx_lpi_timer);
+ return false;
}
-out:
- return ret;
+
+ if (priv->eee_active && !priv->eee_enabled) {
+ timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0);
+ mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer));
+ stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS,
+ tx_lpi_timer);
+ }
+
+ mutex_unlock(&priv->lock);
+ netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n");
+ return true;
}
/* stmmac_get_tx_hwtstamp - get HW TX timestamps
@@ -882,54 +840,42 @@ static int stmmac_mac_link_state(struct phylink_config *config,
return -EOPNOTSUPP;
}
-static void stmmac_mac_config(struct net_device *dev)
+static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
+ const struct phylink_link_state *state)
{
- struct stmmac_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = dev->phydev;
+ struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
u32 ctrl;
ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
+ ctrl &= ~priv->hw->link.speed_mask;
- if (phydev->speed != priv->speed) {
- ctrl &= ~priv->hw->link.speed_mask;
-
- switch (phydev->speed) {
- case SPEED_1000:
- ctrl |= priv->hw->link.speed1000;
- break;
- case SPEED_100:
- ctrl |= priv->hw->link.speed100;
- break;
- case SPEED_10:
- ctrl |= priv->hw->link.speed10;
- break;
- default:
- netif_warn(priv, link, priv->dev,
- "broken speed: %d\n", phydev->speed);
- phydev->speed = SPEED_UNKNOWN;
- break;
- }
-
- if (phydev->speed != SPEED_UNKNOWN)
- stmmac_hw_fix_mac_speed(priv);
-
- priv->speed = phydev->speed;
+ switch (state->speed) {
+ case SPEED_1000:
+ ctrl |= priv->hw->link.speed1000;
+ break;
+ case SPEED_100:
+ ctrl |= priv->hw->link.speed100;
+ break;
+ case SPEED_10:
+ ctrl |= priv->hw->link.speed10;
+ break;
+ default:
+ return;
}
- /* Now we make sure that we can be in full duplex mode.
- * If not, we operate in half-duplex mode. */
- if (phydev->duplex != priv->oldduplex) {
- if (!phydev->duplex)
- ctrl &= ~priv->hw->link.duplex;
- else
- ctrl |= priv->hw->link.duplex;
+ priv->speed = state->speed;
- priv->oldduplex = phydev->duplex;
- }
+ if (priv->plat->fix_mac_speed)
+ priv->plat->fix_mac_speed(priv->plat->bsp_priv, state->speed);
+
+ if (!state->duplex)
+ ctrl &= ~priv->hw->link.duplex;
+ else
+ ctrl |= priv->hw->link.duplex;
/* Flow Control operation */
- if (phydev->pause)
- stmmac_mac_flow_ctrl(priv, phydev->duplex);
+ if (state->pause)
+ stmmac_mac_flow_ctrl(priv, state->duplex);
writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
}
@@ -939,85 +885,40 @@ static void stmmac_mac_an_restart(struct phylink_config *config)
/* Not Supported */
}
-static void stmmac_mac_link_down(struct net_device *dev, bool autoneg)
+static void stmmac_mac_link_down(struct phylink_config *config,
+ unsigned int mode, phy_interface_t interface)
{
- struct stmmac_priv *priv = netdev_priv(dev);
+ struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
stmmac_mac_set(priv, priv->ioaddr, false);
+ priv->eee_active = false;
+ stmmac_eee_init(priv);
+ stmmac_set_eee_pls(priv, priv->hw, false);
}
-static void stmmac_mac_link_up(struct net_device *dev, bool autoneg)
+static void stmmac_mac_link_up(struct phylink_config *config,
+ unsigned int mode, phy_interface_t interface,
+ struct phy_device *phy)
{
- struct stmmac_priv *priv = netdev_priv(dev);
+ struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
stmmac_mac_set(priv, priv->ioaddr, true);
+ if (phy) {
+ priv->eee_active = phy_init_eee(phy, 1) >= 0;
+ priv->eee_enabled = stmmac_eee_init(priv);
+ stmmac_set_eee_pls(priv, priv->hw, true);
+ }
}
-static const struct phylink_mac_ops __maybe_unused stmmac_phylink_mac_ops = {
+static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
.validate = stmmac_validate,
.mac_link_state = stmmac_mac_link_state,
- .mac_config = NULL, /* TO BE FILLED */
+ .mac_config = stmmac_mac_config,
.mac_an_restart = stmmac_mac_an_restart,
- .mac_link_down = NULL, /* TO BE FILLED */
- .mac_link_up = NULL, /* TO BE FILLED */
+ .mac_link_down = stmmac_mac_link_down,
+ .mac_link_up = stmmac_mac_link_up,
};
-/**
- * stmmac_adjust_link - adjusts the link parameters
- * @dev: net device structure
- * Description: this is the helper called by the physical abstraction layer
- * drivers to communicate the phy link status. According the speed and duplex
- * this driver can invoke registered glue-logic as well.
- * It also invoke the eee initialization because it could happen when switch
- * on different networks (that are eee capable).
- */
-static void stmmac_adjust_link(struct net_device *dev)
-{
- struct stmmac_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = dev->phydev;
- bool new_state = false;
-
- if (!phydev)
- return;
-
- mutex_lock(&priv->lock);
-
- if (phydev->link) {
- stmmac_mac_config(dev);
-
- if (!priv->oldlink) {
- new_state = true;
- priv->oldlink = true;
- }
- } else if (priv->oldlink) {
- new_state = true;
- priv->oldlink = false;
- priv->speed = SPEED_UNKNOWN;
- priv->oldduplex = DUPLEX_UNKNOWN;
- }
-
- if (phydev->link)
- stmmac_mac_link_up(dev, false);
- else
- stmmac_mac_link_down(dev, false);
-
- if (new_state && netif_msg_link(priv))
- phy_print_status(phydev);
-
- mutex_unlock(&priv->lock);
-
- if (phydev->is_pseudo_fixed_link)
- /* Stop PHY layer to call the hook to adjust the link in case
- * of a switch is attached to the stmmac driver.
- */
- phydev->irq = PHY_IGNORE_INTERRUPT;
- else
- /* At this stage, init the EEE if supported.
- * Never called in case of fixed_link.
- */
- priv->eee_enabled = stmmac_eee_init(priv);
-}
-
/**
* stmmac_check_pcs_mode - verify if RGMII/SGMII is supported
* @priv: driver private structure
@@ -1054,79 +955,44 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
static int stmmac_init_phy(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
- u32 tx_cnt = priv->plat->tx_queues_to_use;
- struct phy_device *phydev;
- char phy_id_fmt[MII_BUS_ID_SIZE + 3];
- char bus_id[MII_BUS_ID_SIZE];
- int interface = priv->plat->interface;
- int max_speed = priv->plat->max_speed;
- priv->oldlink = false;
- priv->speed = SPEED_UNKNOWN;
- priv->oldduplex = DUPLEX_UNKNOWN;
-
- if (priv->plat->phy_node) {
- phydev = of_phy_connect(dev, priv->plat->phy_node,
- &stmmac_adjust_link, 0, interface);
- } else {
- snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
- priv->plat->bus_id);
+ struct device_node *node;
+ int ret;
- snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
- priv->plat->phy_addr);
- netdev_dbg(priv->dev, "%s: trying to attach to %s\n", __func__,
- phy_id_fmt);
+ node = priv->plat->phy_node;
- phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
- interface);
- }
+ if (node) {
+ ret = phylink_of_phy_connect(priv->phylink, node, 0);
+ } else {
+ int addr = priv->plat->phy_addr;
+ struct phy_device *phydev;
- if (IS_ERR_OR_NULL(phydev)) {
- netdev_err(priv->dev, "Could not attach to PHY\n");
- if (!phydev)
+ phydev = mdiobus_get_phy(priv->mii, addr);
+ if (!phydev) {
+ netdev_err(priv->dev, "no phy at addr %d\n", addr);
return -ENODEV;
+ }
- return PTR_ERR(phydev);
+ ret = phylink_connect_phy(priv->phylink, phydev);
}
- /* Stop Advertising 1000BASE Capability if interface is not GMII */
- if ((interface == PHY_INTERFACE_MODE_MII) ||
- (interface == PHY_INTERFACE_MODE_RMII) ||
- (max_speed < 1000 && max_speed > 0))
- phy_set_max_speed(phydev, SPEED_100);
+ return ret;
+}
- /*
- * Half-duplex mode not supported with multiqueue
- * half-duplex can only works with single queue
- */
- if (tx_cnt > 1) {
- phy_remove_link_mode(phydev,
- ETHTOOL_LINK_MODE_10baseT_Half_BIT);
- phy_remove_link_mode(phydev,
- ETHTOOL_LINK_MODE_100baseT_Half_BIT);
- phy_remove_link_mode(phydev,
- ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
- }
+static int stmmac_phy_setup(struct stmmac_priv *priv)
+{
+ struct device_node *node = priv->plat->phy_node;
+ int mode = priv->plat->interface;
+ struct phylink *phylink;
- /*
- * Broken HW is sometimes missing the pull-up resistor on the
- * MDIO line, which results in reads to non-existent devices returning
- * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
- * device as well.
- * Note: phydev->phy_id is the result of reading the UID PHY registers.
- */
- if (!priv->plat->phy_node && phydev->phy_id == 0) {
- phy_disconnect(phydev);
- return -ENODEV;
- }
+ priv->phylink_config.dev = &priv->dev->dev;
+ priv->phylink_config.type = PHYLINK_NETDEV;
- /* stmmac_adjust_link will change this to PHY_IGNORE_INTERRUPT to avoid
- * subsequent PHY polling, make sure we force a link transition if
- * we have a UP/DOWN/UP transition
- */
- if (phydev->is_pseudo_fixed_link)
- phydev->irq = PHY_POLL;
+ phylink = phylink_create(&priv->phylink_config, of_fwnode_handle(node),
+ mode, &stmmac_phylink_mac_ops);
+ if (IS_ERR(phylink))
+ return PTR_ERR(phylink);
- phy_attached_info(phydev);
+ priv->phylink = phylink;
return 0;
}
@@ -2739,8 +2605,7 @@ static int stmmac_open(struct net_device *dev)
stmmac_init_tx_coalesce(priv);
- if (dev->phydev)
- phy_start(dev->phydev);
+ phylink_start(priv->phylink);
/* Request the IRQ lines */
ret = request_irq(dev->irq, stmmac_interrupt,
@@ -2787,8 +2652,7 @@ static int stmmac_open(struct net_device *dev)
wolirq_error:
free_irq(dev->irq, dev);
irq_error:
- if (dev->phydev)
- phy_stop(dev->phydev);
+ phylink_stop(priv->phylink);
for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
del_timer_sync(&priv->tx_queue[chan].txtimer);
@@ -2797,9 +2661,7 @@ static int stmmac_open(struct net_device *dev)
init_error:
free_dma_desc_resources(priv);
dma_desc_error:
- if (dev->phydev)
- phy_disconnect(dev->phydev);
-
+ phylink_disconnect_phy(priv->phylink);
return ret;
}
@@ -2818,10 +2680,8 @@ static int stmmac_release(struct net_device *dev)
del_timer_sync(&priv->eee_ctrl_timer);
/* Stop and disconnect the PHY */
- if (dev->phydev) {
- phy_stop(dev->phydev);
- phy_disconnect(dev->phydev);
- }
+ phylink_stop(priv->phylink);
+ phylink_disconnect_phy(priv->phylink);
stmmac_stop_all_queues(priv);
@@ -3878,6 +3738,7 @@ static void stmmac_poll_controller(struct net_device *dev)
*/
static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
+ struct stmmac_priv *priv = netdev_priv (dev);
int ret = -EOPNOTSUPP;
if (!netif_running(dev))
@@ -3887,9 +3748,7 @@ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
case SIOCGMIIPHY:
case SIOCGMIIREG:
case SIOCSMIIREG:
- if (!dev->phydev)
- return -EINVAL;
- ret = phy_mii_ioctl(dev->phydev, rq, cmd);
+ ret = phylink_mii_ioctl(priv->phylink, rq, cmd);
break;
case SIOCSHWTSTAMP:
ret = stmmac_hwtstamp_set(dev, rq);
@@ -4480,6 +4339,12 @@ int stmmac_dvr_probe(struct device *device,
}
}
+ ret = stmmac_phy_setup(priv);
+ if (ret) {
+ netdev_err(ndev, "failed to setup phy (%d)\n", ret);
+ goto error_phy_setup;
+ }
+
ret = register_netdev(ndev);
if (ret) {
dev_err(priv->device, "%s: ERROR %i registering the device\n",
@@ -4497,6 +4362,8 @@ int stmmac_dvr_probe(struct device *device,
return ret;
error_netdev_register:
+ phylink_destroy(priv->phylink);
+error_phy_setup:
if (priv->hw->pcs != STMMAC_PCS_RGMII &&
priv->hw->pcs != STMMAC_PCS_TBI &&
priv->hw->pcs != STMMAC_PCS_RTBI)
@@ -4538,6 +4405,7 @@ int stmmac_dvr_remove(struct device *dev)
stmmac_mac_set(priv, priv->ioaddr, false);
netif_carrier_off(ndev);
unregister_netdev(ndev);
+ phylink_destroy(priv->phylink);
if (priv->plat->stmmac_rst)
reset_control_assert(priv->plat->stmmac_rst);
clk_disable_unprepare(priv->plat->pclk);
@@ -4568,8 +4436,7 @@ int stmmac_suspend(struct device *dev)
if (!ndev || !netif_running(ndev))
return 0;
- if (ndev->phydev)
- phy_stop(ndev->phydev);
+ phylink_stop(priv->phylink);
mutex_lock(&priv->lock);
@@ -4594,9 +4461,7 @@ int stmmac_suspend(struct device *dev)
}
mutex_unlock(&priv->lock);
- priv->oldlink = false;
priv->speed = SPEED_UNKNOWN;
- priv->oldduplex = DUPLEX_UNKNOWN;
return 0;
}
EXPORT_SYMBOL_GPL(stmmac_suspend);
@@ -4680,8 +4545,7 @@ int stmmac_resume(struct device *dev)
mutex_unlock(&priv->lock);
- if (ndev->phydev)
- phy_start(ndev->phydev);
+ phylink_start(priv->phylink);
return 0;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index f45bfbef97d0..898f94aced53 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -333,21 +333,6 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
{},
};
- /* If phy-handle property is passed from DT, use it as the PHY */
- plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
- if (plat->phy_node)
- dev_dbg(dev, "Found phy-handle subnode\n");
-
- /* If phy-handle is not specified, check if we have a fixed-phy */
- if (!plat->phy_node && of_phy_is_fixed_link(np)) {
- if ((of_phy_register_fixed_link(np) < 0))
- return -ENODEV;
-
- dev_dbg(dev, "Found fixed-link subnode\n");
- plat->phy_node = of_node_get(np);
- mdio = false;
- }
-
if (of_match_node(need_mdio_ids, np)) {
plat->mdio_node = of_get_child_by_name(np, "mdio");
} else {
@@ -396,6 +381,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
*mac = of_get_mac_address(np);
plat->interface = of_get_phy_mode(np);
+ plat->phy_node = np;
/* Get max speed of operation from device tree */
if (of_property_read_u32(np, "max-speed", &plat->max_speed))
@@ -591,11 +577,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
void stmmac_remove_config_dt(struct platform_device *pdev,
struct plat_stmmacenet_data *plat)
{
- struct device_node *np = pdev->dev.of_node;
-
- if (of_phy_is_fixed_link(np))
- of_phy_deregister_fixed_link(np);
- of_node_put(plat->phy_node);
of_node_put(plat->mdio_node);
}
#else
--
2.21.0
Powered by blists - more mailing lists