netdev - [PATCH net-next 2/2] net: dsa: microchip: Support optional 125MHz SYNCLKO output

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1560372546-3153-3-git-send-email-hancock@sedsystems.ca>
Date:   Wed, 12 Jun 2019 14:49:06 -0600
From:   Robert Hancock <hancock@...systems.ca>
To:     netdev@...r.kernel.org
Cc:     woojung.huh@...rochip.com, UNGLinuxDriver@...rochip.com,
        andrew@...n.ch, vivien.didelot@...il.com, f.fainelli@...il.com,
        Robert Hancock <hancock@...systems.ca>
Subject: [PATCH net-next 2/2] net: dsa: microchip: Support optional 125MHz SYNCLKO output

The KSZ9477 series chips have a SYNCLKO pin which by default outputs a
25MHz clock, but some board setups require a 125MHz clock instead. Added
a microchip,synclko-125 device tree property to allow indicating a
125MHz clock output is required.

Signed-off-by: Robert Hancock <hancock@...systems.ca>
---
 Documentation/devicetree/bindings/net/dsa/ksz.txt | 2 ++
 drivers/net/dsa/microchip/ksz9477.c               | 4 ++++
 drivers/net/dsa/microchip/ksz_common.c            | 2 ++
 drivers/net/dsa/microchip/ksz_priv.h              | 1 +
 4 files changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index e7db726..4ac21ce 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -16,6 +16,8 @@ Required properties:
 Optional properties:
 
 - reset-gpios		: Should be a gpio specifier for a reset line
+- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to
+			  125MHz instead of 25MHz.
 
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 7be6d84..508380f 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -258,6 +258,10 @@ static int ksz9477_reset_switch(struct ksz_device *dev)
 	data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
 	ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
 
+	if (dev->synclko_125)
+		ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1,
+			   SW_ENABLE_REFCLKO | SW_REFCLKO_IS_125MHZ);
+
 	return 0;
 }
 
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 39dace8..40c57d8 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -460,6 +460,8 @@ int ksz_switch_register(struct ksz_device *dev,
 		ret = of_get_phy_mode(dev->dev->of_node);
 		if (ret >= 0)
 			dev->interface = ret;
+		dev->synclko_125 = of_property_read_bool(dev->dev->of_node,
+							 "microchip,synclko-125");
 	}
 
 	ret = dsa_register_switch(dev->ds);
diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h
index 724301d..c615d2a 100644
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ b/drivers/net/dsa/microchip/ksz_priv.h
@@ -78,6 +78,7 @@ struct ksz_device {
 	phy_interface_t interface;
 	u32 regs_size;
 	bool phy_errata_9477;
+	bool synclko_125;
 
 	struct vlan_table *vlan_cache;
 
-- 
1.8.3.1