[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKgT0Uej5CkBJpqsBnB61ozo2kAFKyAH8WY9KVbFQ67ZxPiDag@mail.gmail.com>
Date: Thu, 13 Jun 2019 10:15:33 -0700
From: Alexander Duyck <alexander.duyck@...il.com>
To: Jason Baron <jbaron@...mai.com>
Cc: David Miller <davem@...emloft.net>,
Netdev <netdev@...r.kernel.org>, Joshua Hunt <johunt@...mai.com>,
Willem de Bruijn <willemb@...gle.com>,
Paolo Abeni <pabeni@...hat.com>
Subject: Re: [PATCH net-next] gso: enable udp gso for virtual devices
On Wed, Jun 12, 2019 at 4:14 PM Jason Baron <jbaron@...mai.com> wrote:
>
> Now that the stack supports UDP GRO, we can enable udp gso for virtual
> devices. If packets are looped back locally, and UDP GRO is not enabled
> then they will be segmented to gso_size via udp_rcv_segment(). This
> essentiallly just reverts: 8eea1ca gso: limit udp gso to egress-only
> virtual devices.
>
> Tested by connecting two namespaces via macvlan and then ran
> udpgso_bench_tx:
>
> before:
> udp tx: 2068 MB/s 35085 calls/s 35085 msg/s
>
> after (no UDP_GRO):
> udp tx: 3438 MB/s 58319 calls/s 58319 msg/s
>
> after (UDP_GRO):
> udp tx: 8037 MB/s 136314 calls/s 136314 msg/s
>
> Signed-off-by: Jason Baron <jbaron@...mai.com>
> Co-developed-by: Joshua Hunt <johunt@...mai.com>
> Signed-off-by: Joshua Hunt <johunt@...mai.com>
> Cc: Alexander Duyck <alexander.duyck@...il.com>
> Cc: Willem de Bruijn <willemb@...gle.com>
> Cc: Paolo Abeni <pabeni@...hat.com>
> ---
> drivers/net/bonding/bond_main.c | 5 ++---
> drivers/net/team/team.c | 5 ++---
> include/linux/netdev_features.h | 1 +
> 3 files changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> index 4f5b3ba..c4260be 100644
> --- a/drivers/net/bonding/bond_main.c
> +++ b/drivers/net/bonding/bond_main.c
> @@ -1120,8 +1120,7 @@ static void bond_compute_features(struct bonding *bond)
>
> done:
> bond_dev->vlan_features = vlan_features;
> - bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
> - NETIF_F_GSO_UDP_L4;
> + bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL;
> bond_dev->mpls_features = mpls_features;
> bond_dev->gso_max_segs = gso_max_segs;
> netif_set_gso_max_size(bond_dev, gso_max_size);
> @@ -4308,7 +4307,7 @@ void bond_setup(struct net_device *bond_dev)
> NETIF_F_HW_VLAN_CTAG_RX |
> NETIF_F_HW_VLAN_CTAG_FILTER;
>
> - bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL | NETIF_F_GSO_UDP_L4;
> + bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL;
> bond_dev->features |= bond_dev->hw_features;
> }
>
> diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
> index b48006e..30299e3 100644
> --- a/drivers/net/team/team.c
> +++ b/drivers/net/team/team.c
> @@ -1003,8 +1003,7 @@ static void __team_compute_features(struct team *team)
> }
>
> team->dev->vlan_features = vlan_features;
> - team->dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
> - NETIF_F_GSO_UDP_L4;
> + team->dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL;
> team->dev->hard_header_len = max_hard_header_len;
>
> team->dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
> @@ -2132,7 +2131,7 @@ static void team_setup(struct net_device *dev)
> NETIF_F_HW_VLAN_CTAG_RX |
> NETIF_F_HW_VLAN_CTAG_FILTER;
>
> - dev->hw_features |= NETIF_F_GSO_ENCAP_ALL | NETIF_F_GSO_UDP_L4;
> + dev->hw_features |= NETIF_F_GSO_ENCAP_ALL;
> dev->features |= dev->hw_features;
> }
>
> diff --git a/include/linux/netdev_features.h b/include/linux/netdev_features.h
> index 4b19c54..188127c 100644
> --- a/include/linux/netdev_features.h
> +++ b/include/linux/netdev_features.h
> @@ -237,6 +237,7 @@ static inline int find_next_netdev_feature(u64 feature, unsigned long start)
> NETIF_F_GSO_GRE_CSUM | \
> NETIF_F_GSO_IPXIP4 | \
> NETIF_F_GSO_IPXIP6 | \
> + NETIF_F_GSO_UDP_L4 | \
> NETIF_F_GSO_UDP_TUNNEL | \
> NETIF_F_GSO_UDP_TUNNEL_CSUM)
Are you adding this to NETIF_F_GSO_ENCAP_ALL? Wouldn't it make more
sense to add it to NETIF_F_GSO_SOFTWARE?
Powered by blists - more mailing lists