netdev - [PATCH net-next v1 3/5] net: stmmac: drop the reset GPIO from struct stmmac_mdio_bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190615100932.27101-4-martin.blumenstingl@googlemail.com>
Date:   Sat, 15 Jun 2019 12:09:30 +0200
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     netdev@...r.kernel.org, peppe.cavallaro@...com,
        alexandre.torgue@...com, joabreu@...opsys.com, davem@...emloft.net
Cc:     linus.walleij@...aro.org, andrew@...n.ch,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH net-next v1 3/5] net: stmmac: drop the reset GPIO from struct stmmac_mdio_bus_data

No platform uses the "reset_gpio" field from stmmac_mdio_bus_data
anymore. Drop it so we don't get any new consumers either.

Plain GPIO numbers are being deprecated in favor of GPIO descriptors. If
needed any new non-OF platform can add a GPIO descriptor lookup table.
devm_gpiod_get_optional() will find the GPIO in that case.

Suggested-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 29 ++++++-------------
 include/linux/stmmac.h                        |  1 -
 2 files changed, 9 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 4614f1f2bffb..459ef8afe4fb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -253,21 +253,15 @@ int stmmac_mdio_reset(struct mii_bus *bus)
 	if (priv->device->of_node) {
 		struct gpio_desc *reset_gpio;
 
-		if (data->reset_gpio < 0) {
-			reset_gpio = devm_gpiod_get_optional(priv->device,
-							     "snps,reset",
-							     GPIOD_OUT_LOW);
-			if (IS_ERR(reset_gpio))
-				return PTR_ERR(reset_gpio);
-
-			device_property_read_u32_array(priv->device,
-						       "snps,reset-delays-us",
-						       data->delays, 3);
-		} else {
-			reset_gpio = gpio_to_desc(data->reset_gpio);
-
-			gpiod_direction_output(reset_gpio, 0);
-		}
+		reset_gpio = devm_gpiod_get_optional(priv->device,
+						     "snps,reset",
+						     GPIOD_OUT_LOW);
+		if (IS_ERR(reset_gpio))
+			return PTR_ERR(reset_gpio);
+
+		device_property_read_u32_array(priv->device,
+					       "snps,reset-delays-us",
+					       data->delays, 3);
 
 		if (data->delays[0])
 			msleep(DIV_ROUND_UP(data->delays[0], 1000));
@@ -323,11 +317,6 @@ int stmmac_mdio_register(struct net_device *ndev)
 	if (mdio_bus_data->irqs)
 		memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq));
 
-#ifdef CONFIG_OF
-	if (priv->device->of_node)
-		mdio_bus_data->reset_gpio = -1;
-#endif
-
 	new_bus->name = "stmmac";
 
 	if (priv->plat->has_xgmac) {
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 816edb545592..fe865df82e48 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -97,7 +97,6 @@ struct stmmac_mdio_bus_data {
 	int *irqs;
 	int probed_phy_irq;
 #ifdef CONFIG_OF
-	int reset_gpio;
 	u32 delays[3];
 #endif
 };
-- 
2.22.0