[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d2e298040f4887c547da11178f9ea64f@aplu.fr>
Date: Thu, 20 Jun 2019 09:55:50 +0200
From: Aymeric <mulx@...u.fr>
To: Heiner Kallweit <hkallweit1@...il.com>
Cc: netdev@...r.kernel.org, linux-amlogic@...ts.infradead.org,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: Re: network unstable on odroid-c1/meson8b.
Hi,
On 2019-06-20 00:14, Heiner Kallweit wrote:
> On 19.06.2019 22:18, Aymeric wrote:
>> Hello all,
>>
> Kernel 3.10 didn't have a dedicated RTL8211F PHY driver yet, therefore
> I assume the genphy driver was used. Do you have a line with
> "attached PHY driver" in dmesg output of the vendor kernel?
No.
Here is the full output of the dmesg from vendor kernel [¹].
I've also noticed something strange, it might be linked, but mac address
of the board is set to a random value when using mainline kernel and
I've to set it manually but not when using vendor kernel.
>
> The dedicated PHY driver takes care of the tx delay, if the genphy
> driver is used we have to rely on what uboot configured.
> But if we indeed had an issue with a misconfigured delay, I think
> the connection shouldn't be fine with just another link partner.
> Just to have it tested you could make rtl8211f_config_init() in
> drivers/net/phy/realtek.c a no-op (in current kernels).
>
I'm not an expert here, just adding a "return 0;" here[²] would be
enough?
> And you could compare at least the basic PHY registers 0x00 - 0x30
> with both kernel versions, e.g. with phytool.
>
They are not the same but I don't know what I'm looking for, so for
kernel 3.10 [³] and for kernel 5.1.12 [⁴].
Aymeric
[¹]:
https://paste.aplu.fr/?38ef95b44ebdbfc3#G666/YbhgU+O+tdC/2HaimUCigm8ZTB44qvQip/HJ5A=
[²]:
https://github.com/torvalds/linux/blob/241e39004581475b2802cd63c111fec43bb0123e/drivers/net/phy/realtek.c#L164
[³]:
https://paste.aplu.fr/?2dde1c32d5c68f4c#6xIa8MjTm6jpI6citEJAqFTLMMHDjFZRet/M00/EwjU=
[⁴]:
https://paste.aplu.fr/?32130e9bcb05dde7#N/xdnvb5GklcJtiOxMpTCm+9gsUliRwH8X3dcwSV+ng=
Powered by blists - more mailing lists