netdev - [PATCH net-next 4/6] arm64: dts: fsl: ls1028a: Add Felix switch port DT node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1561131532-14860-5-git-send-email-claudiu.manoil@nxp.com>
Date:   Fri, 21 Jun 2019 18:38:50 +0300
From:   Claudiu Manoil <claudiu.manoil@....com>
To:     "David S . Miller" <davem@...emloft.net>
Cc:     Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Rob Herring <robh+dt@...nel.org>,
        Allan Nielsen <Allan.Nielsen@...rosemi.com>,
        alexandru.marginean@....com, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, UNGLinuxDriver@...rochip.com
Subject: [PATCH net-next 4/6] arm64: dts: fsl: ls1028a: Add Felix switch port DT node

Add the switch device node, available on PF5, so that the
switch port sub-nodes (net devices) can be linked to
corresponding board specific phy nodes (external ports) or
have their link mode defined (internal ports).
The switch device features 6 ports, 4 with external links
and 2 internally facing to the ls1028a SoC and connected via
fixed links to 2 internal enetc ethernet controller ports.
Add the corresponding enetc internal port device nodes,
mapped to PF2 and PF6 PCIe functions.
And don't forget to enable the 4MB BAR4 in the root complex
ECAM space, where the switch registers are mapped.

Signed-off-by: Claudiu Manoil <claudiu.manoil@....com>
---
 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 58 ++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 4cdf84c63320..2462dd936212 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -421,7 +421,9 @@
 				  /* PF1: VF0-1 BAR0 - non-prefetchable memory */
 				  0x82000000 0x0 0x00000000  0x1 0xf8210000  0x0 0x020000
 				  /* PF1: VF0-1 BAR2 - prefetchable memory */
-				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000>;
+				  0xc2000000 0x0 0x00000000  0x1 0xf8230000  0x0 0x020000
+				  /* BAR4 (PF5) - non-prefetchable memory */
+				  0x82000000 0x0 0x00000000  0x1 0xfc000000  0x0 0x400000>;
 
 			enetc_port0: ethernet@0,0 {
 				compatible = "fsl,enetc";
@@ -431,12 +433,66 @@
 				compatible = "fsl,enetc";
 				reg = <0x000100 0 0 0 0>;
 			};
+			ethernet@0,2 {
+				compatible = "fsl,enetc";
+				reg = <0x000200 0 0 0 0>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 			ethernet@0,4 {
 				compatible = "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
 				clocks = <&clockgen 4 0>;
 				little-endian;
 			};
+			switch@0,5 {
+				compatible = "mscc,felix-switch";
+				reg = <0x000500 0 0 0 0>;
+
+				ethernet-ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* external ports */
+					switch_port0: port@0 {
+						reg = <0>;
+					};
+					switch_port1: port@1 {
+						reg = <1>;
+					};
+					switch_port2: port@2 {
+						reg = <2>;
+					};
+					switch_port3: port@3 {
+						reg = <3>;
+					};
+					/* internal to-cpu ports */
+					port@4 {
+						reg = <4>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+					port@5 {
+						reg = <5>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+			ethernet@0,6 {
+				compatible = "fsl,enetc";
+				reg = <0x000600 0 0 0 0>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
-- 
2.17.1