netdev - [PATCH v4 0/5] net: macb: cover letter

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 23 Jun 2019 10:16:59 +0100
From:   Parshuram Thombare <pthombar@...ence.com>
To:     <andrew@...n.ch>, <nicolas.ferre@...rochip.com>,
        <davem@...emloft.net>, <f.fainelli@...il.com>
CC:     <linux@...linux.org.uk>, <netdev@...r.kernel.org>,
        <hkallweit1@...il.com>, <linux-kernel@...r.kernel.org>,
        <rafalc@...ence.com>, <aniljoy@...ence.com>, <piotrs@...ence.com>,
        <pthombar@...ence.com>
Subject: [PATCH v4 0/5] net: macb: cover letter

Hello !

This is 4th version of patch set containing following patches
for Cadence ethernet controller driver.

1. 0001-net-macb-add-phylink-support.patch
   Replace phylib API's with phylink API's.
2. 0002-net-macb-add-support-for-sgmii-MAC-PHY-interface.patch
   This patch add support for SGMII mode.
3. 0004-net-macb-add-support-for-c45-PHY.patch
   This patch is to support C45 PHY.
4. 0005-net-macb-add-support-for-high-speed-interface
   This patch add support for 10G USXGMII PCS in fixed mode.
5. 0006-net-macb-parameter-added-to-cadence-ethernet-controller-DT-binding
   New parameter added to Cadence ethernet controller DT binding
   for USXGMII interface.

Changes in v2:
1. Dropped patch configuring TI PHY DP83867 from
   Cadence PCI wrapper driver.
2. Removed code registering emulated PHY for fixed mode. 
3. Code reformatting as per Andrew's and Florian's suggestions.

Changes in v3:
Based on Russell's suggestions
1. Configure MAC in mac_config only for non in-band modes
2. Handle dynamic phy_mode changes in mac_config
3. Move MAC configurations to mac_config
4. Removed seemingly redundant check for phylink handle
5. Removed code from mac_an_restart and mac_link_state
   now just return -EOPNOTSUPP

Changes in v4:
1. Removed PHY_INTERFACE_MODE_2500BASEX, PHY_INTERFACE_MODE_1000BASEX and
   2.5G PHY_INTERFACE_MODE_SGMII phy modes from supported modes

Regards,
Parshuram Thombare

Parshuram Thombare (5):
  net: macb: add phylink support
  net: macb: add support for sgmii MAC-PHY interface
  net: macb: add support for c45 PHY
  net: macb: add support for high speed interface
  net: macb: parameter added to cadence ethernet controller DT binding

 .../devicetree/bindings/net/macb.txt          |   3 +
 drivers/net/ethernet/cadence/Kconfig          |   2 +-
 drivers/net/ethernet/cadence/macb.h           | 113 +++-
 drivers/net/ethernet/cadence/macb_main.c      | 589 +++++++++++++-----
 4 files changed, 524 insertions(+), 183 deletions(-)

-- 
2.17.1