netdev - Re: [PATCH v4 1/5] net: macb: add phylink support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 23 Jun 2019 11:08:24 +0100
From:   Russell King - ARM Linux admin <linux@...linux.org.uk>
To:     Parshuram Thombare <pthombar@...ence.com>
Cc:     andrew@...n.ch, nicolas.ferre@...rochip.com, davem@...emloft.net,
        f.fainelli@...il.com, netdev@...r.kernel.org, hkallweit1@...il.com,
        linux-kernel@...r.kernel.org, rafalc@...ence.com,
        aniljoy@...ence.com, piotrs@...ence.com
Subject: Re: [PATCH v4 1/5] net: macb: add phylink support

On Sun, Jun 23, 2019 at 10:17:37AM +0100, Parshuram Thombare wrote:
> +	switch (state->interface) {
> +	case PHY_INTERFACE_MODE_GMII:
> +	case PHY_INTERFACE_MODE_RGMII:
> +		if (bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE) {
> +			phylink_set(mask, 1000baseT_Full);
> +			phylink_set(mask, 1000baseX_Full);
> +			if (!(bp->caps & MACB_CAPS_NO_GIGABIT_HALF)) {
> +				phylink_set(mask, 1000baseT_Half);
> +				phylink_set(mask, 1000baseT_Half);

I think this can be cleaned up.

> +			}
> +		}
> +	/* fallthrough */
> +	case PHY_INTERFACE_MODE_MII:
> +	case PHY_INTERFACE_MODE_RMII:
> +		phylink_set(mask, 10baseT_Half);
> +		phylink_set(mask, 10baseT_Full);
> +		phylink_set(mask, 100baseT_Half);
> +		phylink_set(mask, 100baseT_Full);
> +		break;
> +	default:
> +		break;
> +	}
>  
> -	spin_lock_irqsave(&bp->lock, flags);
> +	linkmode_and(supported, supported, mask);
> +	linkmode_and(state->advertising, state->advertising, mask);
>  

You remove this blank line in the next patch, so given that this is a
new function, you might as well clean that up in this patch.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up