lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 24 Jun 2019 19:05:53 +0200
From:   Andrea Claudi <aclaudi@...hat.com>
To:     netdev@...r.kernel.org
Cc:     stephen@...workplumber.org, dsahern@...nel.org
Subject: [PATCH iproute2 1/3] ip address: do not set nodad option for IPv4 addresses

Duplicate Address Detection (RFC 4862) is available only for IPv6
addresses. As a consequence, 'nodad' option, turning it off, should
be available only for IPv6, and is defined like that in the man page.

However it is possible to set nodad on IPv4 addresses, too:

$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 nodad
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
   link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
   inet 192.168.1.1/32 scope global nodad dummy0
      valid_lft forever preferred_lft forever

Fix this adding a check on the protocol family before setting
IFA_F_NODAD flag.

Fixes: bac735c53a36d ("enabled to manipulate the flags of IFA_F_HOMEADDRESS or IFA_F_NODAD from ip.")
Signed-off-by: Andrea Claudi <aclaudi@...hat.com>
---
 ip/ipaddress.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/ip/ipaddress.c b/ip/ipaddress.c
index 47e5be7462fe7..38356cc929e7b 100644
--- a/ip/ipaddress.c
+++ b/ip/ipaddress.c
@@ -2250,7 +2250,10 @@ static int ipaddr_modify(int cmd, int flags, int argc, char **argv)
 		} else if (strcmp(*argv, "home") == 0) {
 			ifa_flags |= IFA_F_HOMEADDRESS;
 		} else if (strcmp(*argv, "nodad") == 0) {
-			ifa_flags |= IFA_F_NODAD;
+			if (req.ifa.ifa_family == AF_INET6)
+				ifa_flags |= IFA_F_NODAD;
+			else
+				invarg("nodad option can be set only for IPv6 addresses\n", *argv);
 		} else if (strcmp(*argv, "mngtmpaddr") == 0) {
 			ifa_flags |= IFA_F_MANAGETEMPADDR;
 		} else if (strcmp(*argv, "noprefixroute") == 0) {
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ