| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190625233942.1946-10-olteanv@gmail.com>
Date: Wed, 26 Jun 2019 02:39:41 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: f.fainelli@...il.com, vivien.didelot@...il.com, andrew@...n.ch,
davem@...emloft.net
Cc: netdev@...r.kernel.org, Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH net-next 09/10] net: dsa: sja1105: Use correct dsa_8021q VIDs for FDB commands
A FDB entry means that "frames that match this VID and DMAC must be
forwarded to this port".
In the case of dsa_8021q however, the VID is not a single one (and
neither two, as my previous patch assumed). The VID can be set either by
the CPU port (1 tx_vid), or by any of the other front-panel port (n-1
rx_vid's).
Fixes: 93647594d8f5 ("net: dsa: sja1105: Hide the dsa_8021q VLANs from the bridge fdb command")
Signed-off-by: Vladimir Oltean <olteanv@...il.com>
---
drivers/net/dsa/sja1105/sja1105_main.c | 82 ++++++++++++++++++--------
1 file changed, 56 insertions(+), 26 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index ed0b721c794e..cadee7694935 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1126,44 +1126,60 @@ static int sja1105_fdb_add(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
struct sja1105_private *priv = ds->priv;
- int rc;
+ u16 rx_vid, tx_vid;
+ int rc, i;
+
+ if (dsa_port_is_vlan_filtering(&ds->ports[port]))
+ return priv->info->fdb_add_cmd(ds, port, addr, vid);
/* Since we make use of VLANs even when the bridge core doesn't tell us
* to, translate these FDB entries into the correct dsa_8021q ones.
+ * The basic idea (also repeats for removal below) is:
+ * - Each of the other front-panel ports needs to be able to forward a
+ * pvid-tagged (aka tagged with their rx_vid) frame that matches this
+ * DMAC.
+ * - The CPU port (aka the tx_vid of this port) needs to be able to
+ * send a frame matching this DMAC to the specified port.
+ * For a better picture see net/dsa/tag_8021q.c.
*/
- if (!dsa_port_is_vlan_filtering(&ds->ports[port])) {
- unsigned int upstream = dsa_upstream_port(priv->ds, port);
- u16 tx_vid = dsa_8021q_tx_vid(ds, port);
- u16 rx_vid = dsa_8021q_rx_vid(ds, port);
+ for (i = 0; i < SJA1105_NUM_PORTS; i++) {
+ if (i == port)
+ continue;
+ if (i == dsa_upstream_port(priv->ds, port))
+ continue;
- rc = priv->info->fdb_add_cmd(ds, port, addr, tx_vid);
+ rx_vid = dsa_8021q_rx_vid(ds, i);
+ rc = priv->info->fdb_add_cmd(ds, port, addr, rx_vid);
if (rc < 0)
return rc;
- return priv->info->fdb_add_cmd(ds, upstream, addr, rx_vid);
}
- return priv->info->fdb_add_cmd(ds, port, addr, vid);
+ tx_vid = dsa_8021q_tx_vid(ds, port);
+ return priv->info->fdb_add_cmd(ds, port, addr, tx_vid);
}
static int sja1105_fdb_del(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
struct sja1105_private *priv = ds->priv;
- int rc;
+ u16 rx_vid, tx_vid;
+ int rc, i;
- /* Since we make use of VLANs even when the bridge core doesn't tell us
- * to, translate these FDB entries into the correct dsa_8021q ones.
- */
- if (!dsa_port_is_vlan_filtering(&ds->ports[port])) {
- unsigned int upstream = dsa_upstream_port(priv->ds, port);
- u16 tx_vid = dsa_8021q_tx_vid(ds, port);
- u16 rx_vid = dsa_8021q_rx_vid(ds, port);
+ if (dsa_port_is_vlan_filtering(&ds->ports[port]))
+ return priv->info->fdb_del_cmd(ds, port, addr, vid);
- rc = priv->info->fdb_del_cmd(ds, port, addr, tx_vid);
+ for (i = 0; i < SJA1105_NUM_PORTS; i++) {
+ if (i == port)
+ continue;
+ if (i == dsa_upstream_port(priv->ds, port))
+ continue;
+
+ rx_vid = dsa_8021q_rx_vid(ds, i);
+ rc = priv->info->fdb_del_cmd(ds, port, addr, rx_vid);
if (rc < 0)
return rc;
- return priv->info->fdb_del_cmd(ds, upstream, addr, rx_vid);
}
- return priv->info->fdb_del_cmd(ds, port, addr, vid);
+ tx_vid = dsa_8021q_tx_vid(ds, port);
+ return priv->info->fdb_del_cmd(ds, port, addr, tx_vid);
}
static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
@@ -1171,8 +1187,12 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
{
struct sja1105_private *priv = ds->priv;
struct device *dev = ds->dev;
+ u16 rx_vid, tx_vid;
int i;
+ rx_vid = dsa_8021q_rx_vid(ds, port);
+ tx_vid = dsa_8021q_tx_vid(ds, port);
+
for (i = 0; i < SJA1105_MAX_L2_LOOKUP_COUNT; i++) {
struct sja1105_l2_lookup_entry l2_lookup = {0};
u8 macaddr[ETH_ALEN];
@@ -1198,14 +1218,24 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
continue;
u64_to_ether_addr(l2_lookup.macaddr, macaddr);
- /* We need to hide the dsa_8021q VLAN from the user.
- * Convert the TX VID into the pvid that is active in
- * standalone and non-vlan_filtering modes, aka 1.
- * The RX VID is applied on the CPU port, which is not seen by
- * the bridge core anyway, so there's nothing to hide.
+ /* We need to hide the dsa_8021q VLANs from the user. This
+ * basically means hiding the duplicates and only showing
+ * the pvid that is supposed to be active in standalone and
+ * non-vlan_filtering modes (aka 1).
+ * - For statically added FDB entries (bridge fdb add), we
+ * can convert the TX VID (coming from the CPU port) into the
+ * pvid and ignore the RX VIDs of the other ports.
+ * - For dynamically learned FDB entries, a single entry with
+ * no duplicates is learned - that which has the real port's
+ * pvid, aka RX VID.
*/
- if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
- l2_lookup.vlanid = 1;
+ if (!dsa_port_is_vlan_filtering(&ds->ports[port])) {
+ if (l2_lookup.vlanid == tx_vid ||
+ l2_lookup.vlanid == rx_vid)
+ l2_lookup.vlanid = 1;
+ else
+ continue;
+ }
cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data);
}
return 0;
--
2.17.1
Powered by blists - more mailing lists