| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190625234348.16246-8-marex@denx.de>
Date: Wed, 26 Jun 2019 01:43:45 +0200
From: Marek Vasut <marex@...x.de>
To: netdev@...r.kernel.org
Cc: Marek Vasut <marex@...x.de>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Tristram Ha <Tristram.Ha@...rochip.com>,
Woojung Huh <Woojung.Huh@...rochip.com>
Subject: [PATCH V4 07/10] net: dsa: microchip: Initial SPI regmap support
Add basic SPI regmap support into the driver.
Previous patches unconver that ksz_spi_write() is always ever called
with len = 1, 2 or 4. We can thus drop the if (len > SPI_TX_BUF_LEN)
check and we can also drop the allocation of the txbuf which is part
of the driver data and wastes 256 bytes for no reason. Regmap covers
the whole thing now.
Signed-off-by: Marek Vasut <marex@...x.de>
Cc: Andrew Lunn <andrew@...n.ch>
Cc: Florian Fainelli <f.fainelli@...il.com>
Cc: Tristram Ha <Tristram.Ha@...rochip.com>
Cc: Woojung Huh <Woojung.Huh@...rochip.com>
---
V2: - Squash with "net: dsa: microchip: Remove dev->txbuf"
- Use separate regmaps for 8/16/32bit registers
- Increase the regmap size to 0xd00 to cover the entire register area
V3: - Rebase on next/master
- Test on KSZ9477EVB
- Increase regmap max register, to cover all switch registers
- Correct regmap reg_bits value to match the hardware
- Use cpu_to_be32() instead of cpu_to_le16() in register masks, since
the KSZ9477 has some 32bit registers.
V4: - Replace cpu_to_be32() with swab32() in regmap read/write_flag_masks.
- Move REGMAP_SPI to NET_DSA_MICROCHIP_KSZ9477_SPI in Kconfig
---
drivers/net/dsa/microchip/Kconfig | 1 +
drivers/net/dsa/microchip/ksz9477_spi.c | 114 +++++++++++-------------
drivers/net/dsa/microchip/ksz_priv.h | 3 +-
3 files changed, 52 insertions(+), 66 deletions(-)
diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index 2c3a6751bdaf..fe0a13b79c4b 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -13,5 +13,6 @@ menuconfig NET_DSA_MICROCHIP_KSZ9477
config NET_DSA_MICROCHIP_KSZ9477_SPI
tristate "KSZ9477 series SPI connected switch driver"
depends on NET_DSA_MICROCHIP_KSZ9477 && SPI
+ select REGMAP_SPI
help
Select to enable support for registering switches configured through SPI.
diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
index 49aeb92d36fc..c72645354dc2 100644
--- a/drivers/net/dsa/microchip/ksz9477_spi.c
+++ b/drivers/net/dsa/microchip/ksz9477_spi.c
@@ -10,78 +10,54 @@
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/regmap.h>
#include <linux/spi/spi.h>
#include "ksz_priv.h"
-/* SPI frame opcodes */
-#define KS_SPIOP_RD 3
-#define KS_SPIOP_WR 2
-
#define SPI_ADDR_SHIFT 24
-#define SPI_ADDR_MASK (BIT(SPI_ADDR_SHIFT) - 1)
+#define SPI_ADDR_ALIGN 3
#define SPI_TURNAROUND_SHIFT 5
-/* Enough to read all switch port registers. */
-#define SPI_TX_BUF_LEN 0x100
-
-static u32 ksz9477_spi_cmd(u32 reg, bool read)
-{
- u32 txbuf;
-
- txbuf = reg & SPI_ADDR_MASK;
- txbuf |= (read ? KS_SPIOP_RD : KS_SPIOP_WR) << SPI_ADDR_SHIFT;
- txbuf <<= SPI_TURNAROUND_SHIFT;
- txbuf = cpu_to_be32(txbuf);
-
- return txbuf;
-}
-
-static int ksz9477_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
- unsigned int len)
-{
- u32 txbuf = ksz9477_spi_cmd(reg, true);
-
- return spi_write_then_read(spi, &txbuf, 4, val, len);
-}
-
-static int ksz9477_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
- unsigned int len)
-{
- u32 *txbuf = (u32 *)val;
-
- *txbuf = ksz9477_spi_cmd(reg, false);
-
- return spi_write(spi, txbuf, 4 + len);
-}
-
-static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
- unsigned int len)
-{
- struct spi_device *spi = dev->priv;
-
- return ksz9477_spi_read_reg(spi, reg, data, len);
-}
-
-static int ksz_spi_write(struct ksz_device *dev, u32 reg, void *data,
- unsigned int len)
-{
- struct spi_device *spi = dev->priv;
+/* SPI frame opcodes */
+#define KS_SPIOP_RD 3
+#define KS_SPIOP_WR 2
- if (len > SPI_TX_BUF_LEN)
- len = SPI_TX_BUF_LEN;
- memcpy(&dev->txbuf[4], data, len);
- return ksz9477_spi_write_reg(spi, reg, dev->txbuf, len);
-}
+#define KS_SPIOP_FLAG_MASK(opcode) \
+ swab32((opcode) << (SPI_ADDR_SHIFT + SPI_TURNAROUND_SHIFT))
+
+#define KSZ_REGMAP_COMMON(width) \
+ { \
+ .val_bits = (width), \
+ .reg_stride = (width) / 8, \
+ .reg_bits = SPI_ADDR_SHIFT + SPI_ADDR_ALIGN, \
+ .pad_bits = SPI_TURNAROUND_SHIFT, \
+ .max_register = BIT(SPI_ADDR_SHIFT) - 1, \
+ .cache_type = REGCACHE_NONE, \
+ .read_flag_mask = KS_SPIOP_FLAG_MASK(KS_SPIOP_RD), \
+ .write_flag_mask = KS_SPIOP_FLAG_MASK(KS_SPIOP_WR), \
+ .reg_format_endian = REGMAP_ENDIAN_BIG, \
+ .val_format_endian = REGMAP_ENDIAN_BIG \
+ }
+
+static const struct regmap_config ksz9477_regmap_config[] = {
+ KSZ_REGMAP_COMMON(8),
+ KSZ_REGMAP_COMMON(16),
+ KSZ_REGMAP_COMMON(32),
+};
static int ksz_spi_read8(struct ksz_device *dev, u32 reg, u8 *val)
{
- return ksz_spi_read(dev, reg, val, 1);
+ unsigned int value;
+ int ret = regmap_read(dev->regmap, reg, &value);
+
+ *val = value;
+ return ret;
}
static int ksz_spi_read16(struct ksz_device *dev, u32 reg, u16 *val)
{
- int ret = ksz_spi_read(dev, reg, (u8 *)val, 2);
+ int ret = regmap_bulk_read(dev->regmap, reg, val, 2);
if (!ret)
*val = be16_to_cpu(*val);
@@ -91,7 +67,7 @@ static int ksz_spi_read16(struct ksz_device *dev, u32 reg, u16 *val)
static int ksz_spi_read32(struct ksz_device *dev, u32 reg, u32 *val)
{
- int ret = ksz_spi_read(dev, reg, (u8 *)val, 4);
+ int ret = regmap_bulk_read(dev->regmap, reg, val, 4);
if (!ret)
*val = be32_to_cpu(*val);
@@ -101,19 +77,19 @@ static int ksz_spi_read32(struct ksz_device *dev, u32 reg, u32 *val)
static int ksz_spi_write8(struct ksz_device *dev, u32 reg, u8 value)
{
- return ksz_spi_write(dev, reg, &value, 1);
+ return regmap_write(dev->regmap, reg, value);
}
static int ksz_spi_write16(struct ksz_device *dev, u32 reg, u16 value)
{
value = cpu_to_be16(value);
- return ksz_spi_write(dev, reg, &value, 2);
+ return regmap_bulk_write(dev->regmap, reg, &value, 2);
}
static int ksz_spi_write32(struct ksz_device *dev, u32 reg, u32 value)
{
value = cpu_to_be32(value);
- return ksz_spi_write(dev, reg, &value, 4);
+ return regmap_bulk_write(dev->regmap, reg, &value, 4);
}
static const struct ksz_io_ops ksz9477_spi_ops = {
@@ -128,17 +104,27 @@ static const struct ksz_io_ops ksz9477_spi_ops = {
static int ksz9477_spi_probe(struct spi_device *spi)
{
struct ksz_device *dev;
- int ret;
+ int i, ret;
dev = ksz_switch_alloc(&spi->dev, &ksz9477_spi_ops, spi);
if (!dev)
return -ENOMEM;
+ for (i = 0; i < ARRAY_SIZE(ksz9477_regmap_config); i++) {
+ dev->regmap[i] = devm_regmap_init_spi(spi,
+ &ksz9477_regmap_config[i]);
+ if (IS_ERR(dev->regmap[i])) {
+ ret = PTR_ERR(dev->regmap[i]);
+ dev_err(&spi->dev,
+ "Failed to initialize regmap%i: %d\n",
+ ksz9477_regmap_config[i].val_bits, ret);
+ return ret;
+ }
+ }
+
if (spi->dev.platform_data)
dev->pdata = spi->dev.platform_data;
- dev->txbuf = devm_kzalloc(dev->dev, 4 + SPI_TX_BUF_LEN, GFP_KERNEL);
-
ret = ksz9477_switch_register(dev);
/* Main DSA driver may not be started yet. */
diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h
index d3ddf98156bb..5ccc633fc766 100644
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ b/drivers/net/dsa/microchip/ksz_priv.h
@@ -57,6 +57,7 @@ struct ksz_device {
const struct ksz_dev_ops *dev_ops;
struct device *dev;
+ struct regmap *regmap[3];
void *priv;
@@ -82,8 +83,6 @@ struct ksz_device {
struct vlan_table *vlan_cache;
- u8 *txbuf;
-
struct ksz_port *ports;
struct timer_list mib_read_timer;
struct work_struct mib_read;
--
2.20.1
Powered by blists - more mailing lists