| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 29 Jun 2019 22:33:58 +0900
From: "Daniel T. Lee" <danieltimlee@...il.com>
To: Jesper Dangaard Brouer <brouer@...hat.com>,
"David S . Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org
Subject: [PATCH 2/2] samples: pktgen: allow to specify destination port
Currently, kernel pktgen has the feature to specify udp destination port
for sending packet. (e.g. pgset "udp_dst_min 9")
But on samples, each of the scripts doesn't have any option to achieve this.
This commit adds the DST_PORT option to specify the target port(s) in the script.
-p : ($DST_PORT) destination PORT range (e.g. 433-444) is also allowed
Signed-off-by: Daniel T. Lee <danieltimlee@...il.com>
---
samples/pktgen/README.rst | 1 +
samples/pktgen/parameters.sh | 7 ++++++-
.../pktgen/pktgen_bench_xmit_mode_netif_receive.sh | 11 +++++++++++
samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh | 11 +++++++++++
samples/pktgen/pktgen_sample01_simple.sh | 11 +++++++++++
samples/pktgen/pktgen_sample02_multiqueue.sh | 11 +++++++++++
samples/pktgen/pktgen_sample03_burst_single_flow.sh | 11 +++++++++++
samples/pktgen/pktgen_sample04_many_flows.sh | 11 +++++++++++
samples/pktgen/pktgen_sample05_flow_per_thread.sh | 12 +++++++++++-
...pktgen_sample06_numa_awared_queue_irq_affinity.sh | 11 +++++++++++
10 files changed, 95 insertions(+), 2 deletions(-)
diff --git a/samples/pktgen/README.rst b/samples/pktgen/README.rst
index ff8929da61c5..fd39215db508 100644
--- a/samples/pktgen/README.rst
+++ b/samples/pktgen/README.rst
@@ -20,6 +20,7 @@ across the sample scripts. Usage example is printed on errors::
-s : ($PKT_SIZE) packet size
-d : ($DEST_IP) destination IP
-m : ($DST_MAC) destination MAC-addr
+ -p : ($DST_PORT) destination PORT range (e.g. 433-444) is also allowed
-t : ($THREADS) threads to start
-f : ($F_THREAD) index of first thread (zero indexed CPU number)
-c : ($SKB_CLONE) SKB clones send before alloc new SKB
diff --git a/samples/pktgen/parameters.sh b/samples/pktgen/parameters.sh
index 72fc562876e2..a06b00a0c7b6 100644
--- a/samples/pktgen/parameters.sh
+++ b/samples/pktgen/parameters.sh
@@ -10,6 +10,7 @@ function usage() {
echo " -s : (\$PKT_SIZE) packet size"
echo " -d : (\$DEST_IP) destination IP"
echo " -m : (\$DST_MAC) destination MAC-addr"
+ echo " -p : (\$DST_PORT) destination PORT range (e.g. 433-444) is also allowed"
echo " -t : (\$THREADS) threads to start"
echo " -f : (\$F_THREAD) index of first thread (zero indexed CPU number)"
echo " -c : (\$SKB_CLONE) SKB clones send before alloc new SKB"
@@ -23,7 +24,7 @@ function usage() {
## --- Parse command line arguments / parameters ---
## echo "Commandline options:"
-while getopts "s:i:d:m:f:t:c:n:b:vxh6" option; do
+while getopts "s:i:d:m:p:f:t:c:n:b:vxh6" option; do
case $option in
i) # interface
export DEV=$OPTARG
@@ -41,6 +42,10 @@ while getopts "s:i:d:m:f:t:c:n:b:vxh6" option; do
export DST_MAC=$OPTARG
info "Destination MAC set to: DST_MAC=$DST_MAC"
;;
+ p) # PORT
+ export DST_PORT=$OPTARG
+ info "Destination PORT set to: DST_PORT=$DST_PORT"
+ ;;
f)
export F_THREAD=$OPTARG
info "Index of first thread (zero indexed CPU number): $F_THREAD"
diff --git a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
index 2839f7d315cf..e14b1a9144d9 100755
--- a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
+++ b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
@@ -41,6 +41,10 @@ fi
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
[ -z "$BURST" ] && BURST=1024
[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
+if [ -n "$DST_PORT" ]; then
+ read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+ validate_ports $DST_MIN $DST_MAX
+fi
# Base Config
DELAY="0" # Zero means max speed
@@ -69,6 +73,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst$IP6 $DEST_IP"
+ if [ -n "$DST_PORT" ]; then
+ # Single destination port or random port range
+ pg_set $dev "flag UDPDST_RND"
+ pg_set $dev "udp_dst_min $DST_MIN"
+ pg_set $dev "udp_dst_max $DST_MAX"
+ fi
+
# Inject packet into RX path of stack
pg_set $dev "xmit_mode netif_receive"
diff --git a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
index e1ee54465def..82c3e504e056 100755
--- a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
+++ b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
@@ -24,6 +24,10 @@ if [[ -n "$BURST" ]]; then
err 1 "Bursting not supported for this mode"
fi
[ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely
+if [ -n "$DST_PORT" ]; then
+ read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+ validate_ports $DST_MIN $DST_MAX
+fi
# Base Config
DELAY="0" # Zero means max speed
@@ -52,6 +56,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst$IP6 $DEST_IP"
+ if [ -n "$DST_PORT" ]; then
+ # Single destination port or random port range
+ pg_set $dev "flag UDPDST_RND"
+ pg_set $dev "udp_dst_min $DST_MIN"
+ pg_set $dev "udp_dst_max $DST_MAX"
+ fi
+
# Inject packet into TX qdisc egress path of stack
pg_set $dev "xmit_mode queue_xmit"
done
diff --git a/samples/pktgen/pktgen_sample01_simple.sh b/samples/pktgen/pktgen_sample01_simple.sh
index e9ab4edba2d7..d1702fdde8f3 100755
--- a/samples/pktgen/pktgen_sample01_simple.sh
+++ b/samples/pktgen/pktgen_sample01_simple.sh
@@ -22,6 +22,10 @@ fi
# Example enforce param "-m" for dst_mac
[ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
[ -z "$COUNT" ] && COUNT="100000" # Zero means indefinitely
+if [ -n "$DST_PORT" ]; then
+ read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+ validate_ports $DST_MIN $DST_MAX
+fi
# Base Config
DELAY="0" # Zero means max speed
@@ -59,6 +63,13 @@ pg_set $DEV "flag NO_TIMESTAMP"
pg_set $DEV "dst_mac $DST_MAC"
pg_set $DEV "dst$IP6 $DEST_IP"
+if [ -n "$DST_PORT" ]; then
+ # Single destination port or random port range
+ pg_set $DEV "flag UDPDST_RND"
+ pg_set $DEV "udp_dst_min $DST_MIN"
+ pg_set $DEV "udp_dst_max $DST_MAX"
+fi
+
# Setup random UDP port src range
pg_set $DEV "flag UDPSRC_RND"
pg_set $DEV "udp_src_min $UDP_MIN"
diff --git a/samples/pktgen/pktgen_sample02_multiqueue.sh b/samples/pktgen/pktgen_sample02_multiqueue.sh
index 99f740ae9857..7f7a9a27548f 100755
--- a/samples/pktgen/pktgen_sample02_multiqueue.sh
+++ b/samples/pktgen/pktgen_sample02_multiqueue.sh
@@ -29,6 +29,10 @@ if [ -z "$DEST_IP" ]; then
[ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
fi
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
+if [ -n "$DST_PORT" ]; then
+ read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+ validate_ports $DST_MIN $DST_MAX
+fi
# General cleanup everything since last run
pg_ctrl "reset"
@@ -60,6 +64,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst$IP6 $DEST_IP"
+ if [ -n "$DST_PORT" ]; then
+ # Single destination port or random port range
+ pg_set $dev "flag UDPDST_RND"
+ pg_set $dev "udp_dst_min $DST_MIN"
+ pg_set $dev "udp_dst_max $DST_MAX"
+ fi
+
# Setup random UDP port src range
pg_set $dev "flag UDPSRC_RND"
pg_set $dev "udp_src_min $UDP_MIN"
diff --git a/samples/pktgen/pktgen_sample03_burst_single_flow.sh b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
index 8fdd36722d9e..b520637817ce 100755
--- a/samples/pktgen/pktgen_sample03_burst_single_flow.sh
+++ b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
@@ -33,6 +33,10 @@ fi
[ -z "$BURST" ] && BURST=32
[ -z "$CLONE_SKB" ] && CLONE_SKB="0" # No need for clones when bursting
[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely
+if [ -n "$DST_PORT" ]; then
+ read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+ validate_ports $DST_MIN $DST_MAX
+fi
# Base Config
DELAY="0" # Zero means max speed
@@ -60,6 +64,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst$IP6 $DEST_IP"
+ if [ -n "$DST_PORT" ]; then
+ # Single destination port or random port range
+ pg_set $dev "flag UDPDST_RND"
+ pg_set $dev "udp_dst_min $DST_MIN"
+ pg_set $dev "udp_dst_max $DST_MAX"
+ fi
+
# Setup burst, for easy testing -b 0 disable bursting
# (internally in pktgen default and minimum burst=1)
if [[ ${BURST} -ne 0 ]]; then
diff --git a/samples/pktgen/pktgen_sample04_many_flows.sh b/samples/pktgen/pktgen_sample04_many_flows.sh
index 4df92b7176da..5b6e9d9cb5b5 100755
--- a/samples/pktgen/pktgen_sample04_many_flows.sh
+++ b/samples/pktgen/pktgen_sample04_many_flows.sh
@@ -17,6 +17,10 @@ source ${basedir}/parameters.sh
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely
+if [ -n "$DST_PORT" ]; then
+ read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+ validate_ports $DST_MIN $DST_MAX
+fi
# NOTICE: Script specific settings
# =======
@@ -56,6 +60,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst $DEST_IP"
+ if [ -n "$DST_PORT" ]; then
+ # Single destination port or random port range
+ pg_set $dev "flag UDPDST_RND"
+ pg_set $dev "udp_dst_min $DST_MIN"
+ pg_set $dev "udp_dst_max $DST_MAX"
+ fi
+
# Randomize source IP-addresses
pg_set $dev "flag IPSRC_RND"
pg_set $dev "src_min 198.18.0.0"
diff --git a/samples/pktgen/pktgen_sample05_flow_per_thread.sh b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
index 7f8b5e59f01e..0c06e63fbe97 100755
--- a/samples/pktgen/pktgen_sample05_flow_per_thread.sh
+++ b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
@@ -22,7 +22,10 @@ source ${basedir}/parameters.sh
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
[ -z "$BURST" ] && BURST=32
[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely
-
+if [ -n "$DST_PORT" ]; then
+ read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+ validate_ports $DST_MIN $DST_MAX
+fi
# Base Config
DELAY="0" # Zero means max speed
@@ -50,6 +53,13 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst $DEST_IP"
+ if [ -n "$DST_PORT" ]; then
+ # Single destination port or random port range
+ pg_set $dev "flag UDPDST_RND"
+ pg_set $dev "udp_dst_min $DST_MIN"
+ pg_set $dev "udp_dst_max $DST_MAX"
+ fi
+
# Setup source IP-addresses based on thread number
pg_set $dev "src_min 198.18.$((thread+1)).1"
pg_set $dev "src_max 198.18.$((thread+1)).1"
diff --git a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
index 353adc17205e..97f0266c0356 100755
--- a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
+++ b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
@@ -35,6 +35,10 @@ if [ -z "$DEST_IP" ]; then
[ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
fi
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
+if [ -n "$DST_PORT" ]; then
+ read -r DST_MIN DST_MAX <<< $(parse_ports $DST_PORT)
+ validate_ports $DST_MIN $DST_MAX
+fi
# General cleanup everything since last run
pg_ctrl "reset"
@@ -77,6 +81,13 @@ for ((i = 0; i < $THREADS; i++)); do
pg_set $dev "dst_mac $DST_MAC"
pg_set $dev "dst$IP6 $DEST_IP"
+ if [ -n "$DST_PORT" ]; then
+ # Single destination port or random port range
+ pg_set $dev "flag UDPDST_RND"
+ pg_set $dev "udp_dst_min $DST_MIN"
+ pg_set $dev "udp_dst_max $DST_MAX"
+ fi
+
# Setup random UDP port src range
pg_set $dev "flag UDPSRC_RND"
pg_set $dev "udp_src_min $UDP_MIN"
--
2.17.1
Powered by blists - more mailing lists