netdev - Re: [PATCH 3/3] net: phy: realtek: Support SSC for the RTL8211E

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 1 Jul 2019 22:49:45 +0200
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Matthias Kaehlcke <mka@...omium.org>,
        "David S . Miller" <davem@...emloft.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>
Cc:     netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Douglas Anderson <dianders@...omium.org>
Subject: Re: [PATCH 3/3] net: phy: realtek: Support SSC for the RTL8211E

On 01.07.2019 21:52, Matthias Kaehlcke wrote:
> By default Spread-Spectrum Clocking (SSC) is disabled on the RTL8211E.
> Enable it if the device tree property 'realtek,enable-ssc' exists.
> 
> Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
> ---
>  drivers/net/phy/realtek.c | 27 ++++++++++++++++++++++++---
>  1 file changed, 24 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index dfc2e20ef335..b617169ccc8c 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -9,8 +9,10 @@
>   * Copyright (c) 2004 Freescale Semiconductor, Inc.
>   */
>  #include <linux/bitops.h>
> -#include <linux/phy.h>
> +#include <linux/device.h>
> +#include <linux/of.h>
>  #include <linux/module.h>
> +#include <linux/phy.h>
>  
>  #define RTL821x_PHYSR				0x11
>  #define RTL821x_PHYSR_DUPLEX			BIT(13)
> @@ -28,6 +30,8 @@
>  
>  #define RTL8211E_EXT_PAGE			7
>  #define RTL8211E_EPAGSR				0x1e
> +#define RTL8211E_SCR				0x1a
> +#define RTL8211E_SCR_DISABLE_RXC_SSC		BIT(2)
>  
>  #define RTL8211F_INSR				0x1d
>  
> @@ -87,8 +91,8 @@ static int rtl821e_restore_page(struct phy_device *phydev, int oldpage, int ret)
>  	return ret;
>  }
>  
> -static int __maybe_unused rtl8211e_modify_ext_paged(struct phy_device *phydev,
> -				    int page, u32 regnum, u16 mask, u16 set)
> +static int rtl8211e_modify_ext_paged(struct phy_device *phydev, int page,
> +				     u32 regnum, u16 mask, u16 set)
>  {
>  	int ret = 0;
>  	int oldpage;
> @@ -114,6 +118,22 @@ static int __maybe_unused rtl8211e_modify_ext_paged(struct phy_device *phydev,
>  	return rtl821e_restore_page(phydev, oldpage, ret);
>  }
>  
> +static int rtl8211e_probe(struct phy_device *phydev)
> +{
> +	struct device *dev = &phydev->mdio.dev;
> +	int err;
> +
> +	if (of_property_read_bool(dev->of_node, "realtek,enable-ssc")) {
> +		err = rtl8211e_modify_ext_paged(phydev, 0xa0, RTL8211E_SCR,
> +						RTL8211E_SCR_DISABLE_RXC_SSC,
> +						0);
> +		if (err)
> +			dev_err(dev, "failed to enable SSC on RXC: %d\n", err);
> +	}
> +
> +	return 0;
> +}
> +
>  static int rtl8201_ack_interrupt(struct phy_device *phydev)
>  {
>  	int err;
> @@ -372,6 +392,7 @@ static struct phy_driver realtek_drvs[] = {
>  		.config_init	= &rtl8211e_config_init,
>  		.ack_interrupt	= &rtl821x_ack_interrupt,
>  		.config_intr	= &rtl8211e_config_intr,
> +		.probe          = rtl8211e_probe,

I'm not sure whether this setting survives soft reset and power-down.
Maybe it should be better applied in the config_init callback.

>  		.suspend	= genphy_suspend,
>  		.resume		= genphy_resume,
>  		.read_page	= rtl821x_read_page,
>