netdev - Re: [PATCH v1 net-next] net: stmmac: enable clause 45 mdio support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190703140520.GA18473@lunn.ch>
Date:   Wed, 3 Jul 2019 16:05:20 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Voon Weifeng <weifeng.voon@...el.com>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Jose Abreu <joabreu@...opsys.com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        biao huang <biao.huang@...iatek.com>,
        Ong Boon Leong <boon.leong.ong@...el.com>,
        Kweh Hock Leong <hock.leong.kweh@...el.com>
Subject: Re: [PATCH v1 net-next] net: stmmac: enable clause 45 mdio support

On Wed, Jul 03, 2019 at 05:50:04PM +0800, Voon Weifeng wrote:
> @@ -155,22 +171,26 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
>  	struct stmmac_priv *priv = netdev_priv(ndev);
>  	unsigned int mii_address = priv->hw->mii.addr;
>  	unsigned int mii_data = priv->hw->mii.data;
> -	u32 v;
> -	int data;
>  	u32 value = MII_BUSY;
> +	int data = 0;
> +	u32 v;
>  
>  	value |= (phyaddr << priv->hw->mii.addr_shift)
>  		& priv->hw->mii.addr_mask;
>  	value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
>  	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
>  		& priv->hw->mii.clk_csr_mask;
> -	if (priv->plat->has_gmac4)
> +	if (priv->plat->has_gmac4) {
>  		value |= MII_GMAC4_READ;
> +		if (phyreg & MII_ADDR_C45)
> +			stmmac_mdio_c45_setup(priv, phyreg, &value, &data);
> +	}
>  
>  	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
>  			       100, 10000))
>  		return -EBUSY;
>  
> +	writel(data, priv->ioaddr + mii_data);

That looks odd. Could you explain why it is needed.

Thanks
	Andrew