netdev - Re: [net-next 1/3] ice: Initialize and register platform device to provide RDMA

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190704124247.GA6807@kroah.com>
Date:   Thu, 4 Jul 2019 14:42:47 +0200
From:   Greg KH <gregkh@...uxfoundation.org>
To:     Jason Gunthorpe <jgg@...lanox.com>
Cc:     Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
        "davem@...emloft.net" <davem@...emloft.net>,
        "dledford@...hat.com" <dledford@...hat.com>,
        Tony Nguyen <anthony.l.nguyen@...el.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-rdma@...r.kernel.org" <linux-rdma@...r.kernel.org>,
        "nhorman@...hat.com" <nhorman@...hat.com>,
        "sassmann@...hat.com" <sassmann@...hat.com>,
        "poswald@...e.com" <poswald@...e.com>,
        "mustafa.ismail@...el.com" <mustafa.ismail@...el.com>,
        "shiraz.saleem@...el.com" <shiraz.saleem@...el.com>,
        Dave Ertman <david.m.ertman@...el.com>,
        Andrew Bowers <andrewx.bowers@...el.com>
Subject: Re: [net-next 1/3] ice: Initialize and register platform device to
 provide RDMA

On Thu, Jul 04, 2019 at 12:37:33PM +0000, Jason Gunthorpe wrote:
> On Thu, Jul 04, 2019 at 02:29:50PM +0200, Greg KH wrote:
> > On Thu, Jul 04, 2019 at 12:16:41PM +0000, Jason Gunthorpe wrote:
> > > On Wed, Jul 03, 2019 at 07:12:50PM -0700, Jeff Kirsher wrote:
> > > > From: Tony Nguyen <anthony.l.nguyen@...el.com>
> > > > 
> > > > The RDMA block does not advertise on the PCI bus or any other bus.
> > > > Thus the ice driver needs to provide access to the RDMA hardware block
> > > > via a virtual bus; utilize the platform bus to provide this access.
> > > > 
> > > > This patch initializes the driver to support RDMA as well as creates
> > > > and registers a platform device for the RDMA driver to register to. At
> > > > this point the driver is fully initialized to register a platform
> > > > driver, however, can not yet register as the ops have not been
> > > > implemented.
> > > 
> > > I think you need Greg's ack on all this driver stuff - particularly
> > > that a platform_device is OK.
> > 
> > A platform_device is almost NEVER ok.
> > 
> > Don't abuse it, make a real device on a real bus.  If you don't have a
> > real bus and just need to create a device to hang other things off of,
> > then use the virtual one, that's what it is there for.
> 
> Ideally I'd like to see all the RDMA drivers that connect to ethernet
> drivers use some similar scheme.

Why?  They should be attached to a "real" device, why make any up?

> Should it be some generic virtual bus?

There is a generic virtual bus today.

> This is for a PCI device that plugs into multiple subsystems in the
> kernel, ie it has net driver functionality, rdma functionality, some
> even have SCSI functionality

Sounds like a MFD device, why aren't you using that functionality
instead?

thanks,

greg k-h