netdev - [PATCH net-next 0/8] mlxsw: Enable/disable PTP shapers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190704070740.302-1-idosch@idosch.org>
Date:   Thu,  4 Jul 2019 10:07:32 +0300
From:   Ido Schimmel <idosch@...sch.org>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, richardcochran@...il.com, jiri@...lanox.com,
        petrm@...lanox.com, shalomt@...lanox.com, mlxsw@...lanox.com,
        Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net-next 0/8] mlxsw: Enable/disable PTP shapers

From: Ido Schimmel <idosch@...lanox.com>

Shalom says:

In order to get more accurate hardware time stamping in Spectrum-1, the
driver needs to apply a shaper on the port for speeds lower than 40Gbps.
This shaper is called a PTP shaper and it is applied on hierarchy 0,
which is the port hierarchy. This shaper may affect the shaper rates of
all hierarchies.

This patchset adds the ability to enable or disable the PTP shaper on
the port in two scenarios:
 1. When the user wants to enable/disable the hardware time stamping
 2. When the port is brought up or down (including port speed change)

Patch #1 adds the QEEC.ptps field that is used for enabling or disabling
the PTP shaper on a port.

Patch #2 adds a note about disabling the PTP shaper when calling to
mlxsw_sp_port_ets_maxrate_set().

Patch #3 adds the QPSC register that is responsible for configuring the
PTP shaper parameters per speed.

Patch #4 sets the PTP shaper parameters during the ptp_init().

Patch #5 adds new operation for getting the port's speed.

Patch #6 enables/disables the PTP shaper when turning on or off the
hardware time stamping.

Patch #7 enables/disables the PTP shaper when the port's status has
changed (including port speed change).

Patch #8 applies the PTP shaper enable/disable logic by filling the PTP
shaper parameters array.

Shalom Toledo (8):
  mlxsw: reg: Add ptps field in QoS ETS Element Configuration Register
  mlxsw: spectrum: Add note about the PTP shaper
  mlxsw: reg: Add QoS PTP Shaper Configuration Register
  mlxsw: spectrum_ptp: Set the PTP shaper parameters
  mlxsw: spectrum: Add new operation for getting the port's speed
  mlxsw: spectrum_ptp: Enable/disable PTP shaper on a port when getting
    HWTSTAMP on/off
  mlxsw: spectrum: Set up PTP shaper when port status has changed
  mlxsw: spectrum_ptp: Apply the PTP shaper enable/disable logic

 drivers/net/ethernet/mellanox/mlxsw/reg.h     | 129 ++++++++++++++
 .../net/ethernet/mellanox/mlxsw/spectrum.c    |  81 +++++----
 .../net/ethernet/mellanox/mlxsw/spectrum.h    |   2 +
 .../ethernet/mellanox/mlxsw/spectrum_ptp.c    | 158 ++++++++++++++++++
 .../ethernet/mellanox/mlxsw/spectrum_ptp.h    |  10 ++
 5 files changed, 350 insertions(+), 30 deletions(-)

-- 
2.20.1