| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 22 Jul 2019 10:15:49 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: "Ji-Ze Hong (Peter Hong)" <hpeter@...il.com>, wg@...ndegger.com,
peter_hong@...tek.com.tw
Cc: davem@...emloft.net, f.suligoi@...m.it,
linux-kernel@...r.kernel.org, linux-can@...r.kernel.org,
netdev@...r.kernel.org,
"Ji-Ze Hong (Peter Hong)" <hpeter+linux_kernel@...il.com>
Subject: Re: [PATCH V2 1/1] can: sja1000: f81601: add Fintek F81601 support
On 7/22/19 8:22 AM, Ji-Ze Hong (Peter Hong) wrote:
> This patch add support for Fintek PCIE to 2 CAN controller support
>
> Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@...il.com>
> ---
> Changelog:
> v2:
> 1: Fix comment on the spinlock with write access.
> 2: Use ARRAY_SIZE instead of F81601_PCI_MAX_CHAN.
> 3: Check the strap pin outside the loop.
> 4: Fix the cleanup issue in f81601_pci_add_card().
> 5: Remove unused "channels" in struct f81601_pci_card.
>
> drivers/net/can/sja1000/Kconfig | 8 ++
> drivers/net/can/sja1000/Makefile | 1 +
> drivers/net/can/sja1000/f81601.c | 215 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 224 insertions(+)
> create mode 100644 drivers/net/can/sja1000/f81601.c
>
> diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
> index f6dc89927ece..8588323c5138 100644
> --- a/drivers/net/can/sja1000/Kconfig
> +++ b/drivers/net/can/sja1000/Kconfig
> @@ -101,4 +101,12 @@ config CAN_TSCAN1
> IRQ numbers are read from jumpers JP4 and JP5,
> SJA1000 IO base addresses are chosen heuristically (first that works).
>
> +config CAN_F81601
> + tristate "Fintek F81601 PCIE to 2 CAN Controller"
> + depends on PCI
> + help
> + This driver adds support for Fintek F81601 PCIE to 2 CAN Controller.
> + It had internal 24MHz clock source, but it can be changed by
> + manufacturer. We can use modinfo to get usage for parameters.
> + Visit http://www.fintek.com.tw to get more information.
> endif
> diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
> index 9253aaf9e739..6f6268543bd9 100644
> --- a/drivers/net/can/sja1000/Makefile
> +++ b/drivers/net/can/sja1000/Makefile
> @@ -13,3 +13,4 @@ obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o
> obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
> obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
> obj-$(CONFIG_CAN_TSCAN1) += tscan1.o
> +obj-$(CONFIG_CAN_F81601) += f81601.o
> diff --git a/drivers/net/can/sja1000/f81601.c b/drivers/net/can/sja1000/f81601.c
> new file mode 100644
> index 000000000000..3c378de8764d
> --- /dev/null
> +++ b/drivers/net/can/sja1000/f81601.c
> @@ -0,0 +1,215 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Fintek F81601 PCIE to 2 CAN controller driver
> + *
> + * Copyright (C) 2019 Peter Hong <peter_hong@...tek.com.tw>
> + * Copyright (C) 2019 Linux Foundation
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/netdevice.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/pci.h>
> +#include <linux/can/dev.h>
> +#include <linux/io.h>
> +#include <linux/version.h>
> +
> +#include "sja1000.h"
> +
> +#define F81601_PCI_MAX_CHAN 2
> +
> +#define F81601_DECODE_REG 0x209
> +#define F81601_IO_MODE BIT(7)
> +#define F81601_MEM_MODE BIT(6)
> +#define F81601_CFG_MODE BIT(5)
> +#define F81601_CAN2_INTERNAL_CLK BIT(3)
> +#define F81601_CAN1_INTERNAL_CLK BIT(2)
> +#define F81601_CAN2_EN BIT(1)
> +#define F81601_CAN1_EN BIT(0)
> +
> +#define F81601_TRAP_REG 0x20a
> +#define F81601_CAN2_HAS_EN BIT(4)
> +
> +struct f81601_pci_card {
> + void __iomem *addr;
> + spinlock_t lock; /* use this spin lock only for write access */
> + struct pci_dev *dev;
> + struct net_device *net_dev[F81601_PCI_MAX_CHAN];
> +};
> +
> +static const struct pci_device_id f81601_pci_tbl[] = {
> + { PCI_DEVICE(0x1c29, 0x1703) },
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(pci, f81601_pci_tbl);
> +
> +static bool internal_clk = 1;
true
> +module_param(internal_clk, bool, 0444);
> +MODULE_PARM_DESC(internal_clk, "Use internal clock, default 1 (24MHz)");
> +
> +static unsigned int external_clk;
> +module_param(external_clk, uint, 0444);
> +MODULE_PARM_DESC(external_clk, "External Clock, must spec when internal_clk = 0");
> +
> +static u8 f81601_pci_read_reg(const struct sja1000_priv *priv, int port)
> +{
> + return readb(priv->reg_base + port);
> +}
> +
> +static void f81601_pci_write_reg(const struct sja1000_priv *priv, int port,
> + u8 val)
> +{
> + struct f81601_pci_card *card = priv->priv;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&card->lock, flags);
> + writeb(val, priv->reg_base + port);
> + readb(priv->reg_base);
> + spin_unlock_irqrestore(&card->lock, flags);
> +}
> +
> +static void f81601_pci_del_card(struct pci_dev *pdev)
> +{
> + struct f81601_pci_card *card = pci_get_drvdata(pdev);
> + struct net_device *dev;
> + int i = 0;
> +
> + for (i = 0; i < ARRAY_SIZE(card->net_dev); i++) {
> + dev = card->net_dev[i];
> + if (!dev)
> + continue;
> +
> + dev_info(&pdev->dev, "%s: Removing %s\n", __func__, dev->name);
> +
> + unregister_sja1000dev(dev);
> + free_sja1000dev(dev);
> + }
> +
> + pcim_iounmap(pdev, card->addr);
> +}
> +
> +/* Probe F81601 based device for the SJA1000 chips and register each
> + * available CAN channel to SJA1000 Socket-CAN subsystem.
> + */
> +static int f81601_pci_add_card(struct pci_dev *pdev,
> + const struct pci_device_id *ent)
> +{
> + struct sja1000_priv *priv;
> + struct net_device *dev;
> + struct f81601_pci_card *card;
> + int err, i, count;
> + u8 tmp;
> +
> + if (pcim_enable_device(pdev) < 0) {
I'm missing a corresponding disable_device().
> + dev_err(&pdev->dev, "Failed to enable PCI device\n");
> + return -ENODEV;
> + }
> +
> + dev_info(&pdev->dev, "Detected card at slot #%i\n",
> + PCI_SLOT(pdev->devfn));
> +
> + card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
> + if (!card)
> + return -ENOMEM;
> +
> + card->dev = pdev;
> + spin_lock_init(&card->lock);
> +
> + pci_set_drvdata(pdev, card);
> +
> + tmp = F81601_IO_MODE | F81601_MEM_MODE | F81601_CFG_MODE |
> + F81601_CAN2_EN | F81601_CAN1_EN;
> +
> + if (internal_clk) {
> + tmp |= F81601_CAN2_INTERNAL_CLK | F81601_CAN1_INTERNAL_CLK;
> +
> + dev_info(&pdev->dev,
> + "F81601 running with internal clock: 24Mhz\n");
> + } else {
> + dev_info(&pdev->dev,
> + "F81601 running with external clock: %dMhz\n",
> + external_clk / 1000000);
> + }
> +
> + pci_write_config_byte(pdev, F81601_DECODE_REG, tmp);
> +
> + card->addr = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
> +
> + if (!card->addr) {
> + err = -ENOMEM;
> + dev_err(&pdev->dev, "%s: Failed to remap BAR\n", __func__);
> + goto failure_cleanup;
> + }
> +
> + /* read CAN2_HW_EN strap pin to detect how many CANBUS do we have */
> + count = ARRAY_SIZE(card->net_dev);
> + pci_read_config_byte(pdev, F81601_TRAP_REG, &tmp);
> + if (!(tmp & F81601_CAN2_HAS_EN))
> + count = 1;
> +
> + /* Detect available channels */
> + for (i = 0; i < count; i++) {
> + dev = alloc_sja1000dev(0);
> + if (!dev) {
> + err = -ENOMEM;
> + goto failure_cleanup;
> + }
> +
> + priv = netdev_priv(dev);
> + priv->priv = card;
> + priv->irq_flags = IRQF_SHARED;
> + priv->reg_base = card->addr + 0x80 * i;
> + priv->read_reg = f81601_pci_read_reg;
> + priv->write_reg = f81601_pci_write_reg;
> +
> + if (internal_clk)
> + priv->can.clock.freq = 24000000 / 2;
> + else
> + priv->can.clock.freq = external_clk / 2;
> +
> + priv->ocr = OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL;
> + priv->cdr = CDR_CBP;
> +
> + SET_NETDEV_DEV(dev, &pdev->dev);
> + dev->dev_id = i;
> + dev->irq = pdev->irq;
> +
> + /* Register SJA1000 device */
> + err = register_sja1000dev(dev);
> + if (err) {
> + dev_err(&pdev->dev,
> + "%s: Registering device failed: %x\n", __func__,
> + err);
> + free_sja1000dev(dev);
> + goto failure_cleanup;
> + }
> +
> + card->net_dev[i] = dev;
> + dev_info(&pdev->dev, "Channel #%d, %s at 0x%p, irq %d\n", i,
> + dev->name, priv->reg_base, dev->irq);
> + }
> +
> + return 0;
> +
> +failure_cleanup:
> + dev_err(&pdev->dev, "%s: failed: %d. Cleaning Up.\n", __func__, err);
> + f81601_pci_del_card(pdev);
> +
> + return err;
> +}
> +
> +static struct pci_driver f81601_pci_driver = {
> + .name = "f81601",
> + .id_table = f81601_pci_tbl,
> + .probe = f81601_pci_add_card,
> + .remove = f81601_pci_del_card,
> +};
> +
> +MODULE_DESCRIPTION("Fintek F81601 PCIE to 2 CANBUS adaptor driver");
> +MODULE_AUTHOR("Peter Hong <peter_hong@...tek.com.tw>");
> +MODULE_LICENSE("GPL v2");
> +
> +module_pci_driver(f81601_pci_driver);
>
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists