lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ffd942e7d7442549a3a6d469709b7f7405928afe.camel@mellanox.com>
Date:   Wed, 24 Jul 2019 19:12:18 +0000
From:   Saeed Mahameed <saeedm@...lanox.com>
To:     "tanhuazhong@...wei.com" <tanhuazhong@...wei.com>,
        "davem@...emloft.net" <davem@...emloft.net>
CC:     "lipeng321@...wei.com" <lipeng321@...wei.com>,
        "yisen.zhuang@...wei.com" <yisen.zhuang@...wei.com>,
        "salil.mehta@...wei.com" <salil.mehta@...wei.com>,
        "linuxarm@...wei.com" <linuxarm@...wei.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "liuyonglong@...wei.com" <liuyonglong@...wei.com>
Subject: Re: [PATCH net-next 07/11] net: hns3: adds debug messages to identify
 eth down cause

On Wed, 2019-07-24 at 11:18 +0800, Huazhong Tan wrote:
> From: Yonglong Liu <liuyonglong@...wei.com>
> 
> Some times just see the eth interface have been down/up via
> dmesg, but can not know why the eth down. So adds some debug
> messages to identify the cause for this.
> 

I really don't like this. your default msg lvl has NETIF_MSG_IFDOWN
turned on .. dumping every single operation that happens on your device
by default to kernel log is too much ! 

We should really consider using trace buffers with well defined
structures for vendor specific events. so we can use bpf filters and
state of the art tools for netdev debugging.

> Signed-off-by: Yonglong Liu <liuyonglong@...wei.com>
> Signed-off-by: Peng Li <lipeng321@...wei.com>
> Signed-off-by: Huazhong Tan <tanhuazhong@...wei.com>
> ---
>  drivers/net/ethernet/hisilicon/hns3/hns3_enet.c    | 24
> ++++++++++++++++++++
>  drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 26
> ++++++++++++++++++++++
>  .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 14 ++++++++++++
>  3 files changed, 64 insertions(+)
> 
> diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
> b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
> index 4d58c53..cff5d59 100644
> --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
> +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
> @@ -459,6 +459,10 @@ static int hns3_nic_net_open(struct net_device
> *netdev)
>  		h->ae_algo->ops->set_timer_task(priv->ae_handle, true);
>  
>  	hns3_config_xps(priv);
> +
> +	if (netif_msg_ifup(h))
> +		netdev_info(netdev, "net open\n");
> +
>  	return 0;
>  }
>  
> @@ -519,6 +523,9 @@ static int hns3_nic_net_stop(struct net_device
> *netdev)
>  	if (test_and_set_bit(HNS3_NIC_STATE_DOWN, &priv->state))
>  		return 0;
>  
> +	if (netif_msg_ifdown(h))
> +		netdev_info(netdev, "net stop\n");
> +
>  	if (h->ae_algo->ops->set_timer_task)
>  		h->ae_algo->ops->set_timer_task(priv->ae_handle,
> false);
>  
> @@ -1550,6 +1557,9 @@ static int hns3_setup_tc(struct net_device
> *netdev, void *type_data)
>  	h = hns3_get_handle(netdev);
>  	kinfo = &h->kinfo;
>  
> +	if (netif_msg_ifdown(h))
> +		netdev_info(netdev, "setup tc: num_tc=%d\n", tc);
> +
>  	return (kinfo->dcb_ops && kinfo->dcb_ops->setup_tc) ?
>  		kinfo->dcb_ops->setup_tc(h, tc, prio_tc) : -EOPNOTSUPP;
>  }
> @@ -1593,6 +1603,11 @@ static int hns3_ndo_set_vf_vlan(struct
> net_device *netdev, int vf, u16 vlan,
>  	struct hnae3_handle *h = hns3_get_handle(netdev);
>  	int ret = -EIO;
>  
> +	if (netif_msg_ifdown(h))

why msg_ifdown ? looks like netif_msg_drv is more appropriate, for many
of the cases in this patch.

> +		netdev_info(netdev,
> +			    "set vf vlan: vf=%d, vlan=%d, qos=%d,
> vlan_proto=%d\n",
> +			    vf, vlan, qos, vlan_proto);
> +
>  	if (h->ae_algo->ops->set_vf_vlan_filter)
>  		ret = h->ae_algo->ops->set_vf_vlan_filter(h, vf, vlan,
>  							  qos,
> vlan_proto);
> @@ -1611,6 +1626,10 @@ static int hns3_nic_change_mtu(struct
> net_device *netdev, int new_mtu)
>  	if (!h->ae_algo->ops->set_mtu)
>  		return -EOPNOTSUPP;
>  
> +	if (netif_msg_ifdown(h))
> +		netdev_info(netdev, "change mtu from %d to %d\n",
> +			    netdev->mtu, new_mtu);
> +
>  	ret = h->ae_algo->ops->set_mtu(h, new_mtu);
>  	if (ret)
>  		netdev_err(netdev, "failed to change MTU in hardware
> %d\n",
> @@ -4395,6 +4414,11 @@ int hns3_set_channels(struct net_device
> *netdev,
>  	if (kinfo->rss_size == new_tqp_num)
>  		return 0;
>  
> +	if (netif_msg_ifdown(h))
> +		netdev_info(netdev,
> +			    "set channels: tqp_num=%d, rxfh=%d\n",
> +			    new_tqp_num, rxfh_configured);
> +
>  	ret = hns3_reset_notify(h, HNAE3_DOWN_CLIENT);
>  	if (ret)
>  		return ret;
> diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
> b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
> index e71c92b..edb9845 100644
> --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
> +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
> @@ -311,6 +311,9 @@ static void hns3_self_test(struct net_device
> *ndev,
>  	if (eth_test->flags != ETH_TEST_FL_OFFLINE)
>  		return;
>  
> +	if (netif_msg_ifdown(h))
> +		netdev_info(ndev, "self test start\n");
> +
>  	st_param[HNAE3_LOOP_APP][0] = HNAE3_LOOP_APP;
>  	st_param[HNAE3_LOOP_APP][1] =
>  			h->flags & HNAE3_SUPPORT_APP_LOOPBACK;
> @@ -374,6 +377,9 @@ static void hns3_self_test(struct net_device
> *ndev,
>  
>  	if (if_running)
>  		ndev->netdev_ops->ndo_open(ndev);
> +
> +	if (netif_msg_ifdown(h))
> +		netdev_info(ndev, "self test end\n");
>  }
>  
>  static int hns3_get_sset_count(struct net_device *netdev, int
> stringset)
> @@ -604,6 +610,11 @@ static int hns3_set_pauseparam(struct net_device
> *netdev,
>  {
>  	struct hnae3_handle *h = hns3_get_handle(netdev);
>  
> +	if (netif_msg_ifdown(h))
> +		netdev_info(netdev,
> +			    "set pauseparam: autoneg=%d, rx:%d,
> tx:%d\n",
> +			    param->autoneg, param->rx_pause, param-
> >tx_pause);
> +
>  	if (h->ae_algo->ops->set_pauseparam)
>  		return h->ae_algo->ops->set_pauseparam(h, param-
> >autoneg,
>  						       param->rx_pause,
> @@ -743,6 +754,13 @@ static int hns3_set_link_ksettings(struct
> net_device *netdev,
>  	if (cmd->base.speed == SPEED_1000 && cmd->base.duplex ==
> DUPLEX_HALF)
>  		return -EINVAL;
>  
> +	if (netif_msg_ifdown(handle))
> +		netdev_info(netdev,
> +			    "set link(%s): autoneg=%d, speed=%d,
> duplex=%d\n",
> +			    netdev->phydev ? "phy" : "mac",
> +			    cmd->base.autoneg, cmd->base.speed,
> +			    cmd->base.duplex);
> +
>  	/* Only support ksettings_set for netdev with phy attached for
> now */
>  	if (netdev->phydev)
>  		return phy_ethtool_ksettings_set(netdev->phydev, cmd);
> @@ -984,6 +1002,10 @@ static int hns3_nway_reset(struct net_device
> *netdev)
>  		return -EINVAL;
>  	}
>  
> +	if (netif_msg_ifdown(handle))
> +		netdev_info(netdev, "nway reset (using %s)\n",
> +			    phy ? "phy" : "mac");
> +
>  	if (phy)
>  		return genphy_restart_aneg(phy);
>  
> @@ -1308,6 +1330,10 @@ static int hns3_set_fecparam(struct net_device
> *netdev,
>  	if (!ops->set_fec)
>  		return -EOPNOTSUPP;
>  	fec_mode = eth_to_loc_fec(fec->fec);
> +
> +	if (netif_msg_ifdown(handle))
> +		netdev_info(netdev, "set fecparam: mode=%d\n",
> fec_mode);
> +
>  	return ops->set_fec(handle, fec_mode);
>  }
>  
> diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
> b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
> index bac4ce1..133e7c6 100644
> --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
> +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
> @@ -201,6 +201,7 @@ static int hclge_client_setup_tc(struct hclge_dev
> *hdev)
>  static int hclge_ieee_setets(struct hnae3_handle *h, struct ieee_ets
> *ets)
>  {
>  	struct hclge_vport *vport = hclge_get_vport(h);
> +	struct net_device *netdev = h->kinfo.netdev;
>  	struct hclge_dev *hdev = vport->back;
>  	bool map_changed = false;
>  	u8 num_tc = 0;
> @@ -215,6 +216,9 @@ static int hclge_ieee_setets(struct hnae3_handle
> *h, struct ieee_ets *ets)
>  		return ret;
>  
>  	if (map_changed) {
> +		if (netif_msg_ifdown(h))
> +			netdev_info(netdev, "set ets\n");
> +
>  		ret = hclge_notify_client(hdev, HNAE3_DOWN_CLIENT);
>  		if (ret)
>  			return ret;
> @@ -300,6 +304,7 @@ static int hclge_ieee_getpfc(struct hnae3_handle
> *h, struct ieee_pfc *pfc)
>  static int hclge_ieee_setpfc(struct hnae3_handle *h, struct ieee_pfc
> *pfc)
>  {
>  	struct hclge_vport *vport = hclge_get_vport(h);
> +	struct net_device *netdev = h->kinfo.netdev;
>  	struct hclge_dev *hdev = vport->back;
>  	u8 i, j, pfc_map, *prio_tc;
>  
> @@ -325,6 +330,11 @@ static int hclge_ieee_setpfc(struct hnae3_handle
> *h, struct ieee_pfc *pfc)
>  	hdev->tm_info.hw_pfc_map = pfc_map;
>  	hdev->tm_info.pfc_en = pfc->pfc_en;
>  
> +	if (netif_msg_ifdown(h))
> +		netdev_info(netdev,
> +			    "set pfc: pfc_en=%d, pfc_map=%d,
> num_tc=%d\n",
> +			    pfc->pfc_en, pfc_map, hdev-
> >tm_info.num_tc);
> +
>  	hclge_tm_pfc_info_update(hdev);
>  
>  	return hclge_pause_setup_hw(hdev, false);
> @@ -345,8 +355,12 @@ static u8 hclge_getdcbx(struct hnae3_handle *h)
>  static u8 hclge_setdcbx(struct hnae3_handle *h, u8 mode)
>  {
>  	struct hclge_vport *vport = hclge_get_vport(h);
> +	struct net_device *netdev = h->kinfo.netdev;
>  	struct hclge_dev *hdev = vport->back;
>  
> +	if (netif_msg_drv(h))
> +		netdev_info(netdev, "set dcbx: mode=%d\n", mode);
> +
>  	/* No support for LLD_MANAGED modes or CEE */
>  	if ((mode & DCB_CAP_DCBX_LLD_MANAGED) ||
>  	    (mode & DCB_CAP_DCBX_VER_CEE) ||

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ