| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190725203618.11011-6-saeedm@mellanox.com>
Date: Thu, 25 Jul 2019 20:36:44 +0000
From: Saeed Mahameed <saeedm@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Jakub Kicinski <jakub.kicinski@...ronome.com>,
Aya Levin <ayal@...lanox.com>,
Saeed Mahameed <saeedm@...lanox.com>
Subject: [net 5/9] net/mlx5e: Fix matching of speed to PRM link modes
From: Aya Levin <ayal@...lanox.com>
Speed translation is performed based on legacy or extended PTYS
register. Translate speed with respect to:
1) Capability bit of extended PTYS table.
2) User request:
a) When auto-negotiation is turned on, inspect advertisement whether it
contains extended link modes.
b) When auto-negotiation is turned off, speed > 100Gbps (maximal
speed supported in legacy mode).
With both conditions fulfilled translation is done with extended PTYS
table otherwise use legacy PTYS table.
Without this patch 25/50/100 Gbps speed cannot be set, since try to
configure in extended mode but read from legacy mode.
Fixes: dd1b9e09c12b ("net/mlx5: ethtool, Allow legacy link-modes configuration via non-extended ptys")
Signed-off-by: Aya Levin <ayal@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
.../net/ethernet/mellanox/mlx5/core/en/port.c | 27 +++++---
.../net/ethernet/mellanox/mlx5/core/en/port.h | 6 +-
.../ethernet/mellanox/mlx5/core/en_ethtool.c | 67 +++++++++++++------
3 files changed, 68 insertions(+), 32 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
index d5e5afbdca6d..f777994f3005 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
@@ -78,9 +78,10 @@ static const u32 mlx5e_ext_link_speed[MLX5E_EXT_LINK_MODES_NUMBER] = {
};
static void mlx5e_port_get_speed_arr(struct mlx5_core_dev *mdev,
- const u32 **arr, u32 *size)
+ const u32 **arr, u32 *size,
+ bool force_legacy)
{
- bool ext = MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet);
+ bool ext = force_legacy ? false : MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet);
*size = ext ? ARRAY_SIZE(mlx5e_ext_link_speed) :
ARRAY_SIZE(mlx5e_link_speed);
@@ -152,7 +153,8 @@ int mlx5_port_set_eth_ptys(struct mlx5_core_dev *dev, bool an_disable,
sizeof(out), MLX5_REG_PTYS, 0, 1);
}
-u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper)
+u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper,
+ bool force_legacy)
{
unsigned long temp = eth_proto_oper;
const u32 *table;
@@ -160,7 +162,7 @@ u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper)
u32 max_size;
int i;
- mlx5e_port_get_speed_arr(mdev, &table, &max_size);
+ mlx5e_port_get_speed_arr(mdev, &table, &max_size, force_legacy);
i = find_first_bit(&temp, max_size);
if (i < max_size)
speed = table[i];
@@ -170,6 +172,7 @@ u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper)
int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed)
{
struct mlx5e_port_eth_proto eproto;
+ bool force_legacy = false;
bool ext;
int err;
@@ -177,8 +180,13 @@ int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed)
err = mlx5_port_query_eth_proto(mdev, 1, ext, &eproto);
if (err)
goto out;
-
- *speed = mlx5e_port_ptys2speed(mdev, eproto.oper);
+ if (ext && !eproto.admin) {
+ force_legacy = true;
+ err = mlx5_port_query_eth_proto(mdev, 1, false, &eproto);
+ if (err)
+ goto out;
+ }
+ *speed = mlx5e_port_ptys2speed(mdev, eproto.oper, force_legacy);
if (!(*speed))
err = -EINVAL;
@@ -201,7 +209,7 @@ int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed)
if (err)
return err;
- mlx5e_port_get_speed_arr(mdev, &table, &max_size);
+ mlx5e_port_get_speed_arr(mdev, &table, &max_size, false);
for (i = 0; i < max_size; ++i)
if (eproto.cap & MLX5E_PROT_MASK(i))
max_speed = max(max_speed, table[i]);
@@ -210,14 +218,15 @@ int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed)
return 0;
}
-u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed)
+u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed,
+ bool force_legacy)
{
u32 link_modes = 0;
const u32 *table;
u32 max_size;
int i;
- mlx5e_port_get_speed_arr(mdev, &table, &max_size);
+ mlx5e_port_get_speed_arr(mdev, &table, &max_size, force_legacy);
for (i = 0; i < max_size; ++i) {
if (table[i] == speed)
link_modes |= MLX5E_PROT_MASK(i);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h
index 70f536ec51c4..4a7f4497692b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h
@@ -48,10 +48,12 @@ void mlx5_port_query_eth_autoneg(struct mlx5_core_dev *dev, u8 *an_status,
u8 *an_disable_cap, u8 *an_disable_admin);
int mlx5_port_set_eth_ptys(struct mlx5_core_dev *dev, bool an_disable,
u32 proto_admin, bool ext);
-u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper);
+u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper,
+ bool force_legacy);
int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
-u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed);
+u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed,
+ bool force_legacy);
int mlx5e_port_query_pbmc(struct mlx5_core_dev *mdev, void *out);
int mlx5e_port_set_pbmc(struct mlx5_core_dev *mdev, void *in);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index ed25757ac5bd..03bed714bac3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -785,7 +785,7 @@ static void ptys2ethtool_supported_advertised_port(struct ethtool_link_ksettings
}
static void get_speed_duplex(struct net_device *netdev,
- u32 eth_proto_oper,
+ u32 eth_proto_oper, bool force_legacy,
struct ethtool_link_ksettings *link_ksettings)
{
struct mlx5e_priv *priv = netdev_priv(netdev);
@@ -795,7 +795,7 @@ static void get_speed_duplex(struct net_device *netdev,
if (!netif_carrier_ok(netdev))
goto out;
- speed = mlx5e_port_ptys2speed(priv->mdev, eth_proto_oper);
+ speed = mlx5e_port_ptys2speed(priv->mdev, eth_proto_oper, force_legacy);
if (!speed) {
speed = SPEED_UNKNOWN;
goto out;
@@ -914,8 +914,8 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv,
/* Fields: eth_proto_admin and ext_eth_proto_admin are
* mutually exclusive. Hence try reading legacy advertising
* when extended advertising is zero.
- * admin_ext indicates how eth_proto_admin should be
- * interpreted
+ * admin_ext indicates which proto_admin (ext vs. legacy)
+ * should be read and interpreted
*/
admin_ext = ext;
if (ext && !eth_proto_admin) {
@@ -924,7 +924,7 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv,
admin_ext = false;
}
- eth_proto_oper = MLX5_GET_ETH_PROTO(ptys_reg, out, ext,
+ eth_proto_oper = MLX5_GET_ETH_PROTO(ptys_reg, out, admin_ext,
eth_proto_oper);
eth_proto_lp = MLX5_GET(ptys_reg, out, eth_proto_lp_advertise);
an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin);
@@ -939,7 +939,8 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv,
get_supported(mdev, eth_proto_cap, link_ksettings);
get_advertising(eth_proto_admin, tx_pause, rx_pause, link_ksettings,
admin_ext);
- get_speed_duplex(priv->netdev, eth_proto_oper, link_ksettings);
+ get_speed_duplex(priv->netdev, eth_proto_oper, !admin_ext,
+ link_ksettings);
eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap;
@@ -1016,45 +1017,69 @@ static u32 mlx5e_ethtool2ptys_ext_adver_link(const unsigned long *link_modes)
return ptys_modes;
}
+static bool ext_link_mode_requested(const unsigned long *adver)
+{
+#define MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT ETHTOOL_LINK_MODE_50000baseKR_Full_BIT
+ int size = __ETHTOOL_LINK_MODE_MASK_NBITS - MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(modes);
+
+ bitmap_set(modes, MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT, size);
+ return bitmap_intersects(modes, adver, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static bool ext_speed_requested(u32 speed)
+{
+#define MLX5E_MAX_PTYS_LEGACY_SPEED 100000
+ return !!(speed > MLX5E_MAX_PTYS_LEGACY_SPEED);
+}
+
+static bool ext_requested(u8 autoneg, const unsigned long *adver, u32 speed)
+{
+ bool ext_link_mode = ext_link_mode_requested(adver);
+ bool ext_speed = ext_speed_requested(speed);
+
+ return autoneg == AUTONEG_ENABLE ? ext_link_mode : ext_speed;
+}
+
int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv,
const struct ethtool_link_ksettings *link_ksettings)
{
struct mlx5_core_dev *mdev = priv->mdev;
struct mlx5e_port_eth_proto eproto;
+ const unsigned long *adver;
bool an_changes = false;
u8 an_disable_admin;
bool ext_supported;
- bool ext_requested;
u8 an_disable_cap;
bool an_disable;
u32 link_modes;
u8 an_status;
+ u8 autoneg;
u32 speed;
+ bool ext;
int err;
u32 (*ethtool2ptys_adver_func)(const unsigned long *adver);
-#define MLX5E_PTYS_EXT ((1ULL << ETHTOOL_LINK_MODE_50000baseKR_Full_BIT) - 1)
+ adver = link_ksettings->link_modes.advertising;
+ autoneg = link_ksettings->base.autoneg;
+ speed = link_ksettings->base.speed;
- ext_requested = !!(link_ksettings->link_modes.advertising[0] >
- MLX5E_PTYS_EXT ||
- link_ksettings->link_modes.advertising[1]);
+ ext = ext_requested(autoneg, adver, speed),
ext_supported = MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet);
- ext_requested &= ext_supported;
+ if (!ext_supported && ext)
+ return -EOPNOTSUPP;
- speed = link_ksettings->base.speed;
- ethtool2ptys_adver_func = ext_requested ?
- mlx5e_ethtool2ptys_ext_adver_link :
+ ethtool2ptys_adver_func = ext ? mlx5e_ethtool2ptys_ext_adver_link :
mlx5e_ethtool2ptys_adver_link;
- err = mlx5_port_query_eth_proto(mdev, 1, ext_requested, &eproto);
+ err = mlx5_port_query_eth_proto(mdev, 1, ext, &eproto);
if (err) {
netdev_err(priv->netdev, "%s: query port eth proto failed: %d\n",
__func__, err);
goto out;
}
- link_modes = link_ksettings->base.autoneg == AUTONEG_ENABLE ?
- ethtool2ptys_adver_func(link_ksettings->link_modes.advertising) :
- mlx5e_port_speed2linkmodes(mdev, speed);
+ link_modes = autoneg == AUTONEG_ENABLE ? ethtool2ptys_adver_func(adver) :
+ mlx5e_port_speed2linkmodes(mdev, speed, !ext);
link_modes = link_modes & eproto.cap;
if (!link_modes) {
@@ -1067,14 +1092,14 @@ int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv,
mlx5_port_query_eth_autoneg(mdev, &an_status, &an_disable_cap,
&an_disable_admin);
- an_disable = link_ksettings->base.autoneg == AUTONEG_DISABLE;
+ an_disable = autoneg == AUTONEG_DISABLE;
an_changes = ((!an_disable && an_disable_admin) ||
(an_disable && !an_disable_admin));
if (!an_changes && link_modes == eproto.admin)
goto out;
- mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, ext_requested);
+ mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, ext);
mlx5_toggle_port_link(mdev);
out:
--
2.21.0
Powered by blists - more mailing lists