[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190727094011.14024-1-opensource@vdorst.com>
Date: Sat, 27 Jul 2019 11:40:11 +0200
From: René van Dorst <opensource@...rst.com>
To: Russell King <linux@...linux.org.uk>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S . Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org,
René van Dorst <opensource@...rst.com>
Subject: [PATCH net] net: phylink: Fix flow control for fixed-link
In phylink_parse_fixedlink() the pl->link_config.advertising bits are AND
with pl->supported, pl->supported is zeroed and only the speed/duplex
modes and MII bits are set.
So pl->link_config.advertising always loses the flow control/pause bits.
By setting Pause and Asym_Pause bits in pl->supported, the flow control
work again when devicetree "pause" is set in fixes-link node and the MAC
advertise that is supports pause.
Results with this patch.
Legend:
- DT = 'Pause' is set in the fixed-link in devicetree.
- validate() = ‘Yes’ means phylink_set(mask, Pause) is set in the
validate().
- flow = results reported my link is Up line.
+-----+------------+-------+
| DT | validate() | flow |
+-----+------------+-------+
| Yes | Yes | rx/tx |
| No | Yes | off |
| Yes | No | off |
+-----+------------+-------+
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: René van Dorst <opensource@...rst.com>
---
drivers/net/phy/phylink.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 5d0af041b8f9..a6aebaa14338 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -216,6 +216,8 @@ static int phylink_parse_fixedlink(struct phylink *pl,
pl->supported, true);
linkmode_zero(pl->supported);
phylink_set(pl->supported, MII);
+ phylink_set(pl->supported, Pause);
+ phylink_set(pl->supported, Asym_Pause);
if (s) {
__set_bit(s->bit, pl->supported);
} else {
--
2.20.1
Powered by blists - more mailing lists