[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190731204147.8582-9-jeffrey.t.kirsher@intel.com>
Date: Wed, 31 Jul 2019 13:41:39 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Brett Creeley <brett.creeley@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com,
Andrew Bowers <andrewx.bowers@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 08/16] ice: Only bump Rx tail and release buffers once per napi_poll
From: Brett Creeley <brett.creeley@...el.com>
Currently we bump the Rx tail and release/give buffers to hardware every
16 descriptors. This causes us to bump Rx tail up to 4 times per
napi_poll call. Also we are always bumping tail on an odd index and this
is a problem because hardware ignores the lower 3 bits in the QRX_TAIL
register. This is making it so hardware sees tail bumps only every 8
descriptors. Instead lets only bump Rx tail once per napi_poll if
the value aligns with hardware's expectations of the lower 3 bits being
cleared. Also only release/give Rx buffers once per napi_poll call.
Signed-off-by: Brett Creeley <brett.creeley@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/ice/ice_txrx.c | 42 +++++++++++++++--------
1 file changed, 27 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index dd7392f293bf..0c459305c12f 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -377,18 +377,28 @@ int ice_setup_rx_ring(struct ice_ring *rx_ring)
*/
static void ice_release_rx_desc(struct ice_ring *rx_ring, u32 val)
{
+ u16 prev_ntu = rx_ring->next_to_use;
+
rx_ring->next_to_use = val;
/* update next to alloc since we have filled the ring */
rx_ring->next_to_alloc = val;
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64).
+ /* QRX_TAIL will be updated with any tail value, but hardware ignores
+ * the lower 3 bits. This makes it so we only bump tail on meaningful
+ * boundaries. Also, this allows us to bump tail on intervals of 8 up to
+ * the budget depending on the current traffic load.
*/
- wmb();
- writel(val, rx_ring->tail);
+ val &= ~0x7;
+ if (prev_ntu != val) {
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+ writel(val, rx_ring->tail);
+ }
}
/**
@@ -445,7 +455,13 @@ ice_alloc_mapped_page(struct ice_ring *rx_ring, struct ice_rx_buf *bi)
* @rx_ring: ring to place buffers on
* @cleaned_count: number of buffers to replace
*
- * Returns false if all allocations were successful, true if any fail
+ * Returns false if all allocations were successful, true if any fail. Returning
+ * true signals to the caller that we didn't replace cleaned_count buffers and
+ * there is more work to do.
+ *
+ * First, try to clean "cleaned_count" Rx buffers. Then refill the cleaned Rx
+ * buffers. Then bump tail at most one time. Grouping like this lets us avoid
+ * multiple tail writes per call.
*/
bool ice_alloc_rx_bufs(struct ice_ring *rx_ring, u16 cleaned_count)
{
@@ -990,7 +1006,7 @@ static int ice_clean_rx_irq(struct ice_ring *rx_ring, int budget)
{
unsigned int total_rx_bytes = 0, total_rx_pkts = 0;
u16 cleaned_count = ICE_DESC_UNUSED(rx_ring);
- bool failure = false;
+ bool failure;
/* start the loop to process Rx packets bounded by 'budget' */
while (likely(total_rx_pkts < (unsigned int)budget)) {
@@ -1002,13 +1018,6 @@ static int ice_clean_rx_irq(struct ice_ring *rx_ring, int budget)
u16 vlan_tag = 0;
u8 rx_ptype;
- /* return some buffers to hardware, one at a time is too slow */
- if (cleaned_count >= ICE_RX_BUF_WRITE) {
- failure = failure ||
- ice_alloc_rx_bufs(rx_ring, cleaned_count);
- cleaned_count = 0;
- }
-
/* get the Rx desc from Rx ring based on 'next_to_clean' */
rx_desc = ICE_RX_DESC(rx_ring, rx_ring->next_to_clean);
@@ -1085,6 +1094,9 @@ static int ice_clean_rx_irq(struct ice_ring *rx_ring, int budget)
total_rx_pkts++;
}
+ /* return up to cleaned_count buffers to hardware */
+ failure = ice_alloc_rx_bufs(rx_ring, cleaned_count);
+
/* update queue and vector specific stats */
u64_stats_update_begin(&rx_ring->syncp);
rx_ring->stats.pkts += total_rx_pkts;
--
2.21.0
Powered by blists - more mailing lists