Message-ID: <20190803173825-mutt-send-email-mst@kernel.org>
Date:   Sat, 3 Aug 2019 17:54:04 -0400
From:   "Michael S. Tsirkin" <mst@...hat.com>
To:     Jason Wang <jasowang@...hat.com>
Cc:     kvm@...r.kernel.org, virtualization@...ts.linux-foundation.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-mm@...ck.org, jgg@...pe.ca,
        "Paul E. McKenney" <paulmck@...ux.ibm.com>
Subject: Re: [PATCH V2 7/9] vhost: do not use RCU to synchronize MMU notifier
 with worker

On Thu, Aug 01, 2019 at 04:06:13AM -0400, Jason Wang wrote:
> On 2019/8/1 上午2:29, Michael S. Tsirkin wrote:
> > On Wed, Jul 31, 2019 at 04:46:53AM -0400, Jason Wang wrote:
> >> We used to use RCU to synchronize MMU notifier with worker. This leads
> >> calling synchronize_rcu() in invalidate_range_start(). But on a busy
> >> system, there would be many factors that may slow down the
> >> synchronize_rcu() which makes it unsuitable to be called in MMU
> >> notifier.
> >>
> >> A solution is SRCU but its overhead is obvious with the expensive full
> >> memory barrier. Another choice is to use seqlock, but it doesn't
> >> provide a synchronization method between readers and writers. The last
> >> choice is to use vq mutex, but it need to deal with the worst case
> >> that MMU notifier must be blocked and wait for the finish of swap in.
> >>
> >> So this patch switches use a counter to track whether or not the map
> >> was used. The counter was increased when vq try to start or finish
> >> uses the map. This means, when it was even, we're sure there's no
> >> readers and MMU notifier is synchronized. When it was odd, it means
> >> there's a reader we need to wait it to be even again then we are
> >> synchronized. To avoid full memory barrier, store_release +
> >> load_acquire on the counter is used.
> >
> > Unfortunately this needs a lot of review and testing, so this can't make
> > rc2, and I don't think this is the kind of patch I can merge after rc3.
> > Subtle memory barrier tricks like this can introduce new bugs while they
> > are fixing old ones.
> 
> I admit the patch is tricky. Some questions:
> 
> - Do we must address the case of e.g swap in? If not, a simple
>   vhost_work_flush() instead of synchronize_rcu() may work.
> - Having some hard thought, I think we can use seqlock, it looks
>   to me smp_wmb() is in write_segcount_begin() is sufficient, we don't
>   care vq->map read before smp_wmb(), and for the other we all have
>   good data devendency so smp_wmb() in the write_seqbegin_end() is
>   sufficient.

If we need an mb in the begin() we can switch to
dependent_ptr_mb. if you need me to fix it up
and repost, let me know.

Why isn't it a problem if the map is
accessed outside the lock?



> diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> index db2c81cb1e90..6d9501303258 100644
> --- a/drivers/vhost/vhost.c
> +++ b/drivers/vhost/vhost.c
> @@ -363,39 +363,29 @@ static bool vhost_map_range_overlap(struct vhost_uaddr *uaddr,
>  
>  static void inline vhost_vq_access_map_begin(struct vhost_virtqueue *vq)
>  {
> -	int ref = READ_ONCE(vq->ref);
> -
> -	smp_store_release(&vq->ref, ref + 1);
> -	/* Make sure ref counter is visible before accessing the map */
> -	smp_load_acquire(&vq->ref);
> +	write_seqcount_begin(&vq->seq);
>  }
>  
>  static void inline vhost_vq_access_map_end(struct vhost_virtqueue *vq)
>  {
> -	int ref = READ_ONCE(vq->ref);
> -
> -	/* Make sure vq access is done before increasing ref counter */
> -	smp_store_release(&vq->ref, ref + 1);
> +	write_seqcount_end(&vq->seq);
>  }
>  
>  static void inline vhost_vq_sync_access(struct vhost_virtqueue *vq)
>  {
> -	int ref;
> +	unsigned int ret;
>  
>  	/* Make sure map change was done before checking ref counter */
>  	smp_mb();
> -
> -	ref = READ_ONCE(vq->ref);
> -	if (ref & 0x1) {
> -		/* When ref change, we are sure no reader can see
> +	ret = raw_read_seqcount(&vq->seq);
> +	if (ret & 0x1) {
> +		/* When seq changes, we are sure no reader can see
>  		 * previous map */
> -		while (READ_ONCE(vq->ref) == ref) {
> -			set_current_state(TASK_RUNNING);
> +		while (raw_read_seqcount(&vq->seq) == ret)
>  			schedule();


So why do we set state here? And should not we
check need_sched?


> -		}
>  	}
> -	/* Make sure ref counter was checked before any other
> -	 * operations that was dene on map. */
> +	/* Make sure seq was checked before any other operations that
> +	 * was dene on map. */
>  	smp_mb();
>  }
>  
> @@ -691,7 +681,7 @@ void vhost_dev_init(struct vhost_dev *dev,
>  		vq->indirect = NULL;
>  		vq->heads = NULL;
>  		vq->dev = dev;
> -		vq->ref = 0;
> +		seqcount_init(&vq->seq);
>  		mutex_init(&vq->mutex);
>  		spin_lock_init(&vq->mmu_lock);
>  		vhost_vq_reset(dev, vq);
> diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
> index 3d10da0ae511..1a705e181a84 100644
> --- a/drivers/vhost/vhost.h
> +++ b/drivers/vhost/vhost.h
> @@ -125,7 +125,7 @@ struct vhost_virtqueue {
>  	 */
>  	struct vhost_uaddr uaddrs[VHOST_NUM_ADDRS];
>  #endif
> -	int ref;
> +	seqcount_t seq;
>  	const struct vhost_umem_node *meta_iotlb[VHOST_NUM_ADDRS];
>  
>  	struct file *kick;
> -- 
> 2.18.1
> 
> >
> >
> >
> >
> >
> >>
> >> Consider the read critical section is pretty small the synchronization
> >> should be done very fast.
> >>
> >> Note the patch lead about 3% PPS dropping.
> >
> > Sorry what do you mean by this last sentence? This degrades performance
> > compared to what?
> 
> Compare to without this patch.

OK is the feature still a performance win? or should we drop it for now?

> >
> >>
> >> Reported-by: Michael S. Tsirkin <mst@...hat.com>
> >> Fixes: 7f466032dc9e ("vhost: access vq metadata through kernel virtual address")
> >> Signed-off-by: Jason Wang <jasowang@...hat.com>
> >> ---
> >>  drivers/vhost/vhost.c | 145 ++++++++++++++++++++++++++----------------
> >>  drivers/vhost/vhost.h |   7 +-
> >>  2 files changed, 94 insertions(+), 58 deletions(-)
> >>
> >> diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> >> index cfc11f9ed9c9..db2c81cb1e90 100644
> >> --- a/drivers/vhost/vhost.c
> >> +++ b/drivers/vhost/vhost.c
> >> @@ -324,17 +324,16 @@ static void vhost_uninit_vq_maps(struct vhost_virtqueue *vq)
> >>  
> >>  	spin_lock(&vq->mmu_lock);
> >>  	for (i = 0; i < VHOST_NUM_ADDRS; i++) {
> >> -		map[i] = rcu_dereference_protected(vq->maps[i],
> >> -				  lockdep_is_held(&vq->mmu_lock));
> >> +		map[i] = vq->maps[i];
> >>  		if (map[i]) {
> >>  			vhost_set_map_dirty(vq, map[i], i);
> >> -			rcu_assign_pointer(vq->maps[i], NULL);
> >> +			vq->maps[i] = NULL;
> >>  		}
> >>  	}
> >>  	spin_unlock(&vq->mmu_lock);
> >>  
> >> -	/* No need for synchronize_rcu() or kfree_rcu() since we are
> >> -	 * serialized with memory accessors (e.g vq mutex held).
> >> +	/* No need for synchronization since we are serialized with
> >> +	 * memory accessors (e.g vq mutex held).
> >>  	 */
> >>  
> >>  	for (i = 0; i < VHOST_NUM_ADDRS; i++)
> >> @@ -362,6 +361,44 @@ static bool vhost_map_range_overlap(struct vhost_uaddr *uaddr,
> >>  	return !(end < uaddr->uaddr || start > uaddr->uaddr - 1 + uaddr->size);
> >>  }
> >>  
> >> +static void inline vhost_vq_access_map_begin(struct vhost_virtqueue *vq)
> >> +{
> >> +	int ref = READ_ONCE(vq->ref);
> >> +
> >> +	smp_store_release(&vq->ref, ref + 1);
> >> +	/* Make sure ref counter is visible before accessing the map */
> >> +	smp_load_acquire(&vq->ref);
> >
> > The map access is after this sequence, correct?
> 
> Yes.
> 
> >
> > Just going by the rules in Documentation/memory-barriers.txt,
> > I think that this pair will not order following accesses with ref store.
> >
> > Documentation/memory-barriers.txt says:
> >
> >
> > +     In addition, a RELEASE+ACQUIRE
> > +     pair is -not- guaranteed to act as a full memory barrier.
> >
> >
> >
> > The guarantee that is made is this:
> > 	after
> >      an ACQUIRE on a given variable, all memory accesses preceding any prior
> >      RELEASE on that same variable are guaranteed to be visible.
> 
> Yes, but it's not clear about the order of ACQUIRE the same location
> of previous RELEASE. And it only has a example like:
> 
> "
> 	*A = a;
> 	RELEASE M
> 	ACQUIRE N
> 	*B = b;
> 
> could occur as:
> 
> 	ACQUIRE N, STORE *B, STORE *A, RELEASE M
> "
> 
> But it doesn't explain what happen when
> 
> *A = a
> RELEASE M
> ACQUIRE M
> *B = b;
> 
> And tools/memory-model/Documentation said
> 
> "
> First, when a lock-acquire reads from a lock-release, the LKMM
> requires that every instruction po-before the lock-release must
> execute before any instruction po-after the lock-acquire.
> "
> 
> Is this a hint that I was correct?

I don't think it's correct since by this logic
memory barriers can be nops on x86.

> >
> >
> > And if we also had the reverse rule we'd end up with a full barrier,
> > won't we?
> >
> > Cc Paul in case I missed something here. And if I'm right,
> > maybe we should call this out, adding
> >
> > 	"The opposite is not true: a prior RELEASE is not
> > 	 guaranteed to be visible before memory accesses following
> > 	 the subsequent ACQUIRE".
> 
> That kinds of violates the RELEASE?
> 
> "
>      This also acts as a one-way permeable barrier.  It guarantees that all
>      memory operations before the RELEASE operation will appear to happen
>      before the RELEASE operation with respect to the other components of the
> "


yes but we are talking about RELEASE itself versus stuff
that comes after it.

> >
> >
> >
> >> +}
> >> +
> >> +static void inline vhost_vq_access_map_end(struct vhost_virtqueue *vq)
> >> +{
> >> +	int ref = READ_ONCE(vq->ref);
> >> +
> >> +	/* Make sure vq access is done before increasing ref counter */
> >> +	smp_store_release(&vq->ref, ref + 1);
> >> +}
> >> +
> >> +static void inline vhost_vq_sync_access(struct vhost_virtqueue *vq)
> >> +{
> >> +	int ref;
> >> +
> >> +	/* Make sure map change was done before checking ref counter */
> >> +	smp_mb();
> >> +
> >> +	ref = READ_ONCE(vq->ref);
> >> +	if (ref & 0x1) {
> >
> > Please document the even/odd trick here too, not just in the commit log.
> >
> 
> Ok.
> 
> >> +		/* When ref change,
> >
> > changes
> >
> >> we are sure no reader can see
> >> +		 * previous map */
> >> +		while (READ_ONCE(vq->ref) == ref) {
> >
> >
> > what is the below line in aid of?
> >
> >> +			set_current_state(TASK_RUNNING);

any answers here?

> >> +			schedule();
> >
> >                         if (need_resched())
> >                                 schedule();
> >
> > ?
> 
> Yes, better.
> 
> >
> >> +		}
> >
> > On an interruptible kernel, there's a risk here is that
> > a task got preempted with an odd ref.
> > So I suspect we'll have to disable preemption when we
> > make ref odd.
> 
> I'm not sure I get, if the odd is not the original value we read,
> we're sure it won't read the new map here I believe.

But we will spin for a very long time in this case.

> >
> >
> >> +	}
> >> +	/* Make sure ref counter was checked before any other
> >> +	 * operations that was dene on map. */
> >
> > was dene -> were done?
> >
> 
> Yes.
> 
> >> +	smp_mb();
> >> +}
> >> +
> >>  static void vhost_invalidate_vq_start(struct vhost_virtqueue *vq,
> >>  				      int index,
> >>  				      unsigned long start,
> >> @@ -376,16 +413,15 @@ static void vhost_invalidate_vq_start(struct vhost_virtqueue *vq,
> >>  	spin_lock(&vq->mmu_lock);
> >>  	++vq->invalidate_count;
> >>  
> >> -	map = rcu_dereference_protected(vq->maps[index],
> >> -					lockdep_is_held(&vq->mmu_lock));
> >> +	map = vq->maps[index];
> >>  	if (map) {
> >>  		vhost_set_map_dirty(vq, map, index);
> >> -		rcu_assign_pointer(vq->maps[index], NULL);
> >> +		vq->maps[index] = NULL;
> >>  	}
> >>  	spin_unlock(&vq->mmu_lock);
> >>  
> >>  	if (map) {
> >> -		synchronize_rcu();
> >> +		vhost_vq_sync_access(vq);
> >>  		vhost_map_unprefetch(map);
> >>  	}
> >>  }
> >> @@ -457,7 +493,7 @@ static void vhost_init_maps(struct vhost_dev *dev)
> >>  	for (i = 0; i < dev->nvqs; ++i) {
> >>  		vq = dev->vqs[i];
> >>  		for (j = 0; j < VHOST_NUM_ADDRS; j++)
> >> -			RCU_INIT_POINTER(vq->maps[j], NULL);
> >> +			vq->maps[j] = NULL;
> >>  	}
> >>  }
> >>  #endif
> >> @@ -655,6 +691,7 @@ void vhost_dev_init(struct vhost_dev *dev,
> >>  		vq->indirect = NULL;
> >>  		vq->heads = NULL;
> >>  		vq->dev = dev;
> >> +		vq->ref = 0;
> >>  		mutex_init(&vq->mutex);
> >>  		spin_lock_init(&vq->mmu_lock);
> >>  		vhost_vq_reset(dev, vq);
> >> @@ -921,7 +958,7 @@ static int vhost_map_prefetch(struct vhost_virtqueue *vq,
> >>  	map->npages = npages;
> >>  	map->pages = pages;
> >>  
> >> -	rcu_assign_pointer(vq->maps[index], map);
> >> +	vq->maps[index] = map;
> >>  	/* No need for a synchronize_rcu(). This function should be
> >>  	 * called by dev->worker so we are serialized with all
> >>  	 * readers.
> >> @@ -1216,18 +1253,18 @@ static inline int vhost_put_avail_event(struct vhost_virtqueue *vq)
> >>  	struct vring_used *used;
> >>  
> >>  	if (!vq->iotlb) {
> >> -		rcu_read_lock();
> >> +		vhost_vq_access_map_begin(vq);
> >>  
> >> -		map = rcu_dereference(vq->maps[VHOST_ADDR_USED]);
> >> +		map = vq->maps[VHOST_ADDR_USED];
> >>  		if (likely(map)) {
> >>  			used = map->addr;
> >>  			*((__virtio16 *)&used->ring[vq->num]) =
> >>  				cpu_to_vhost16(vq, vq->avail_idx);
> >> -			rcu_read_unlock();
> >> +			vhost_vq_access_map_end(vq);
> >>  			return 0;
> >>  		}
> >>  
> >> -		rcu_read_unlock();
> >> +		vhost_vq_access_map_end(vq);
> >>  	}
> >>  #endif
> >>  
> >> @@ -1245,18 +1282,18 @@ static inline int vhost_put_used(struct vhost_virtqueue *vq,
> >>  	size_t size;
> >>  
> >>  	if (!vq->iotlb) {
> >> -		rcu_read_lock();
> >> +		vhost_vq_access_map_begin(vq);
> >>  
> >> -		map = rcu_dereference(vq->maps[VHOST_ADDR_USED]);
> >> +		map = vq->maps[VHOST_ADDR_USED];
> >>  		if (likely(map)) {
> >>  			used = map->addr;
> >>  			size = count * sizeof(*head);
> >>  			memcpy(used->ring + idx, head, size);
> >> -			rcu_read_unlock();
> >> +			vhost_vq_access_map_end(vq);
> >>  			return 0;
> >>  		}
> >>  
> >> -		rcu_read_unlock();
> >> +		vhost_vq_access_map_end(vq);
> >>  	}
> >>  #endif
> >>  
> >> @@ -1272,17 +1309,17 @@ static inline int vhost_put_used_flags(struct vhost_virtqueue *vq)
> >>  	struct vring_used *used;
> >>  
> >>  	if (!vq->iotlb) {
> >> -		rcu_read_lock();
> >> +		vhost_vq_access_map_begin(vq);
> >>  
> >> -		map = rcu_dereference(vq->maps[VHOST_ADDR_USED]);
> >> +		map = vq->maps[VHOST_ADDR_USED];
> >>  		if (likely(map)) {
> >>  			used = map->addr;
> >>  			used->flags = cpu_to_vhost16(vq, vq->used_flags);
> >> -			rcu_read_unlock();
> >> +			vhost_vq_access_map_end(vq);
> >>  			return 0;
> >>  		}
> >>  
> >> -		rcu_read_unlock();
> >> +		vhost_vq_access_map_end(vq);
> >>  	}
> >>  #endif
> >>  
> >> @@ -1298,17 +1335,17 @@ static inline int vhost_put_used_idx(struct vhost_virtqueue *vq)
> >>  	struct vring_used *used;
> >>  
> >>  	if (!vq->iotlb) {
> >> -		rcu_read_lock();
> >> +		vhost_vq_access_map_begin(vq);
> >>  
> >> -		map = rcu_dereference(vq->maps[VHOST_ADDR_USED]);
> >> +		map = vq->maps[VHOST_ADDR_USED];
> >>  		if (likely(map)) {
> >>  			used = map->addr;
> >>  			used->idx = cpu_to_vhost16(vq, vq->last_used_idx);
> >> -			rcu_read_unlock();
> >> +			vhost_vq_access_map_end(vq);
> >>  			return 0;
> >>  		}
> >>  
> >> -		rcu_read_unlock();
> >> +		vhost_vq_access_map_end(vq);
> >>  	}
> >>  #endif
> >>  
> >> @@ -1362,17 +1399,17 @@ static inline int vhost_get_avail_idx(struct vhost_virtqueue *vq,
> >>  	struct vring_avail *avail;
> >>  
> >>  	if (!vq->iotlb) {
> >> -		rcu_read_lock();
> >> +		vhost_vq_access_map_begin(vq);
> >>  
> >> -		map = rcu_dereference(vq->maps[VHOST_ADDR_AVAIL]);
> >> +		map = vq->maps[VHOST_ADDR_AVAIL];
> >>  		if (likely(map)) {
> >>  			avail = map->addr;
> >>  			*idx = avail->idx;
> >> -			rcu_read_unlock();
> >> +			vhost_vq_access_map_end(vq);
> >>  			return 0;
> >>  		}
> >>  
> >> -		rcu_read_unlock();
> >> +		vhost_vq_access_map_end(vq);
> >>  	}
> >>  #endif
> >>  
> >> @@ -1387,17 +1424,17 @@ static inline int vhost_get_avail_head(struct vhost_virtqueue *vq,
> >>  	struct vring_avail *avail;
> >>  
> >>  	if (!vq->iotlb) {
> >> -		rcu_read_lock();
> >> +		vhost_vq_access_map_begin(vq);
> >>  
> >> -		map = rcu_dereference(vq->maps[VHOST_ADDR_AVAIL]);
> >> +		map = vq->maps[VHOST_ADDR_AVAIL];
> >>  		if (likely(map)) {
> >>  			avail = map->addr;
> >>  			*head = avail->ring[idx & (vq->num - 1)];
> >> -			rcu_read_unlock();
> >> +			vhost_vq_access_map_end(vq);
> >>  			return 0;
> >>  		}
> >>  
> >> -		rcu_read_unlock();
> >> +		vhost_vq_access_map_end(vq);
> >>  	}
> >>  #endif
> >>  
> >> @@ -1413,17 +1450,17 @@ static inline int vhost_get_avail_flags(struct vhost_virtqueue *vq,
> >>  	struct vring_avail *avail;
> >>  
> >>  	if (!vq->iotlb) {
> >> -		rcu_read_lock();
> >> +		vhost_vq_access_map_begin(vq);
> >>  
> >> -		map = rcu_dereference(vq->maps[VHOST_ADDR_AVAIL]);
> >> +		map = vq->maps[VHOST_ADDR_AVAIL];
> >>  		if (likely(map)) {
> >>  			avail = map->addr;
> >>  			*flags = avail->flags;
> >> -			rcu_read_unlock();
> >> +			vhost_vq_access_map_end(vq);
> >>  			return 0;
> >>  		}
> >>  
> >> -		rcu_read_unlock();
> >> +		vhost_vq_access_map_end(vq);
> >>  	}
> >>  #endif
> >>  
> >> @@ -1438,15 +1475,15 @@ static inline int vhost_get_used_event(struct vhost_virtqueue *vq,
> >>  	struct vring_avail *avail;
> >>  
> >>  	if (!vq->iotlb) {
> >> -		rcu_read_lock();
> >> -		map = rcu_dereference(vq->maps[VHOST_ADDR_AVAIL]);
> >> +		vhost_vq_access_map_begin(vq);
> >> +		map = vq->maps[VHOST_ADDR_AVAIL];
> >>  		if (likely(map)) {
> >>  			avail = map->addr;
> >>  			*event = (__virtio16)avail->ring[vq->num];
> >> -			rcu_read_unlock();
> >> +			vhost_vq_access_map_end(vq);
> >>  			return 0;
> >>  		}
> >> -		rcu_read_unlock();
> >> +		vhost_vq_access_map_end(vq);
> >>  	}
> >>  #endif
> >>  
> >> @@ -1461,17 +1498,17 @@ static inline int vhost_get_used_idx(struct vhost_virtqueue *vq,
> >>  	struct vring_used *used;
> >>  
> >>  	if (!vq->iotlb) {
> >> -		rcu_read_lock();
> >> +		vhost_vq_access_map_begin(vq);
> >>  
> >> -		map = rcu_dereference(vq->maps[VHOST_ADDR_USED]);
> >> +		map = vq->maps[VHOST_ADDR_USED];
> >>  		if (likely(map)) {
> >>  			used = map->addr;
> >>  			*idx = used->idx;
> >> -			rcu_read_unlock();
> >> +			vhost_vq_access_map_end(vq);
> >>  			return 0;
> >>  		}
> >>  
> >> -		rcu_read_unlock();
> >> +		vhost_vq_access_map_end(vq);
> >>  	}
> >>  #endif
> >>  
> >> @@ -1486,17 +1523,17 @@ static inline int vhost_get_desc(struct vhost_virtqueue *vq,
> >>  	struct vring_desc *d;
> >>  
> >>  	if (!vq->iotlb) {
> >> -		rcu_read_lock();
> >> +		vhost_vq_access_map_begin(vq);
> >>  
> >> -		map = rcu_dereference(vq->maps[VHOST_ADDR_DESC]);
> >> +		map = vq->maps[VHOST_ADDR_DESC];
> >>  		if (likely(map)) {
> >>  			d = map->addr;
> >>  			*desc = *(d + idx);
> >> -			rcu_read_unlock();
> >> +			vhost_vq_access_map_end(vq);
> >>  			return 0;
> >>  		}
> >>  
> >> -		rcu_read_unlock();
> >> +		vhost_vq_access_map_end(vq);
> >>  	}
> >>  #endif
> >>  
> >> @@ -1843,13 +1880,11 @@ static bool iotlb_access_ok(struct vhost_virtqueue *vq,
> >>  #if VHOST_ARCH_CAN_ACCEL_UACCESS
> >>  static void vhost_vq_map_prefetch(struct vhost_virtqueue *vq)
> >>  {
> >> -	struct vhost_map __rcu *map;
> >> +	struct vhost_map *map;
> >>  	int i;
> >>  
> >>  	for (i = 0; i < VHOST_NUM_ADDRS; i++) {
> >> -		rcu_read_lock();
> >> -		map = rcu_dereference(vq->maps[i]);
> >> -		rcu_read_unlock();
> >> +		map = vq->maps[i];
> >>  		if (unlikely(!map))
> >>  			vhost_map_prefetch(vq, i);
> >>  	}
> >> diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
> >> index a9a2a93857d2..f9e9558a529d 100644
> >> --- a/drivers/vhost/vhost.h
> >> +++ b/drivers/vhost/vhost.h
> >> @@ -115,16 +115,17 @@ struct vhost_virtqueue {
> >>  #if VHOST_ARCH_CAN_ACCEL_UACCESS
> >>  	/* Read by memory accessors, modified by meta data
> >>  	 * prefetching, MMU notifier and vring ioctl().
> >> -	 * Synchonrized through mmu_lock (writers) and RCU (writers
> >> -	 * and readers).
> >> +	 * Synchonrized through mmu_lock (writers) and ref counters,
> >> +	 * see vhost_vq_access_map_begin()/vhost_vq_access_map_end().
> >>  	 */
> >> -	struct vhost_map __rcu *maps[VHOST_NUM_ADDRS];
> >> +	struct vhost_map *maps[VHOST_NUM_ADDRS];
> >>  	/* Read by MMU notifier, modified by vring ioctl(),
> >>  	 * synchronized through MMU notifier
> >>  	 * registering/unregistering.
> >>  	 */
> >>  	struct vhost_uaddr uaddrs[VHOST_NUM_ADDRS];
> >>  #endif
> >> +	int ref;
> >
> > Is it important that this is signed? If not I'd do unsigned here:
> > even though kernel does compile with 2s complement sign overflow,
> > it seems cleaner not to depend on that.
> 
> Not a must, let me fix.
> 
> Thanks
> 
> >
> >>  	const struct vhost_umem_node *meta_iotlb[VHOST_NUM_ADDRS];
> >>  
> >>  	struct file *kick;
> >> -- 
> >> 2.18.1

Powered by blists - more mailing lists