netdev - Re: [PATCH 06/16] net: phy: adin: support PHY mode converters

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190806153910.GB20422@lunn.ch>
Date:   Tue, 6 Aug 2019 17:39:10 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     "Ardelean, Alexandru" <alexandru.Ardelean@...log.com>
Cc:     "davem@...emloft.net" <davem@...emloft.net>,
        "hkallweit1@...il.com" <hkallweit1@...il.com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "f.fainelli@...il.com" <f.fainelli@...il.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>
Subject: Re: [PATCH 06/16] net: phy: adin: support PHY mode converters

On Tue, Aug 06, 2019 at 06:47:08AM +0000, Ardelean, Alexandru wrote:
> On Mon, 2019-08-05 at 16:51 +0200, Andrew Lunn wrote:
> > [External]
> > 
> > On Mon, Aug 05, 2019 at 07:54:43PM +0300, Alexandru Ardelean wrote:
> > > Sometimes, the connection between a MAC and PHY is done via a
> > > mode/interface converter. An example is a GMII-to-RGMII converter, which
> > > would mean that the MAC operates in GMII mode while the PHY operates in
> > > RGMII. In this case there is a discrepancy between what the MAC expects &
> > > what the PHY expects and both need to be configured in their respective
> > > modes.
> > > 
> > > Sometimes, this converter is specified via a board/system configuration (in
> > > the device-tree for example). But, other times it can be left unspecified.
> > > The use of these converters is common in boards that have FPGA on them.
> > > 
> > > This patch also adds support for a `adi,phy-mode-internal` property that
> > > can be used in these (implicit convert) cases. The internal PHY mode will
> > > be used to specify the correct register settings for the PHY.
> > > 
> > > `fwnode_handle` is used, since this property may be specified via ACPI as
> > > well in other setups, but testing has been done in DT context.
> > 
> > Looking at the patch, you seems to assume phy-mode is what the MAC is
> > using? That seems rather odd, given the name. It seems like a better
> > solution would be to add a mac-mode, which the MAC uses to configure
> > its side of the link. The MAC driver would then implement this
> > property.
> > 
> 
> actually, that's a pretty good idea;
> i guess i was narrow-minded when writing the driver, and got stuck on phy specifics, and forgot about the MAC-side;
> [ i also catch these design elements when reviewing, but i also seem to miss them when writing stuff sometimes ]
> 

Hi Ardelean

We should also consider the media converter itself. It is passive, or
does it need a driver. You seems to be considering GMII-to-RGMII. But
what about RGMII to SGMII? or RGMII to 1000Base-KX etc? Ideally we
want a generic solution and we need to think about all the parts in
the system.

     Andrew