| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 6 Aug 2019 06:35:45 +0000
From: "Ardelean, Alexandru" <alexandru.Ardelean@...log.com>
To: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"hkallweit1@...il.com" <hkallweit1@...il.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: "f.fainelli@...il.com" <f.fainelli@...il.com>,
"davem@...emloft.net" <davem@...emloft.net>,
"mark.rutland@....com" <mark.rutland@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"andrew@...n.ch" <andrew@...n.ch>
Subject: Re: [PATCH 01/16] net: phy: adin: add support for Analog Devices
PHYs
On Mon, 2019-08-05 at 22:54 +0200, Heiner Kallweit wrote:
> [External]
>
> On 05.08.2019 18:54, Alexandru Ardelean wrote:
> > This change adds support for Analog Devices Industrial Ethernet PHYs.
> > Particularly the PHYs this driver adds support for:
> > * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY
> > * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit
> > Ethernet PHY
> >
> > The 2 chips are pin & register compatible with one another. The main
> > difference being that ADIN1200 doesn't operate in gigabit mode.
> >
> > The chips can be operated by the Generic PHY driver as well via the
> > standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the
> > kernel as well. This assumes that configuration of the PHY has been done
> > required.
> >
> > Configuration can also be done via registers, which will be implemented by
> > the driver in the next changes.
> >
> > Datasheets:
> > https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf
> > https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
> > ---
> > MAINTAINERS | 7 +++++
> > drivers/net/phy/Kconfig | 9 ++++++
> > drivers/net/phy/Makefile | 1 +
> > drivers/net/phy/adin.c | 59 ++++++++++++++++++++++++++++++++++++++++
> > 4 files changed, 76 insertions(+)
> > create mode 100644 drivers/net/phy/adin.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index ee663e0e2f2e..faf5723610c8 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -938,6 +938,13 @@ S: Supported
> > F: drivers/mux/adgs1408.c
> > F: Documentation/devicetree/bindings/mux/adi,adgs1408.txt
> >
> > +ANALOG DEVICES INC ADIN DRIVER
> > +M: Alexandru Ardelean <alexaundru.ardelean@...log.com>
> > +L: netdev@...r.kernel.org
> > +W: http://ez.analog.com/community/linux-device-drivers
> > +S: Supported
> > +F: drivers/net/phy/adin.c
> > +
> > ANALOG DEVICES INC ADIS DRIVER LIBRARY
> > M: Alexandru Ardelean <alexandru.ardelean@...log.com>
> > S: Supported
> > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> > index 206d8650ee7f..5966d3413676 100644
> > --- a/drivers/net/phy/Kconfig
> > +++ b/drivers/net/phy/Kconfig
> > @@ -257,6 +257,15 @@ config SFP
> > depends on HWMON || HWMON=n
> > select MDIO_I2C
> >
> > +config ADIN_PHY
> > + tristate "Analog Devices Industrial Ethernet PHYs"
> > + help
> > + Adds support for the Analog Devices Industrial Ethernet PHYs.
> > + Currently supports the:
> > + - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY
> > + - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
> > + Ethernet PHY
> > +
> > config AMD_PHY
> > tristate "AMD PHYs"
> > ---help---
> > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> > index ba07c27e4208..a03437e091f3 100644
> > --- a/drivers/net/phy/Makefile
> > +++ b/drivers/net/phy/Makefile
> > @@ -47,6 +47,7 @@ obj-$(CONFIG_SFP) += sfp.o
> > sfp-obj-$(CONFIG_SFP) += sfp-bus.o
> > obj-y += $(sfp-obj-y) $(sfp-obj-m)
> >
> > +obj-$(CONFIG_ADIN_PHY) += adin.o
> > obj-$(CONFIG_AMD_PHY) += amd.o
> > aquantia-objs += aquantia_main.o
> > ifdef CONFIG_HWMON
> > diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
> > new file mode 100644
> > index 000000000000..6a610d4563c3
> > --- /dev/null
> > +++ b/drivers/net/phy/adin.c
> > @@ -0,0 +1,59 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/**
> > + * Driver for Analog Devices Industrial Ethernet PHYs
> > + *
> > + * Copyright 2019 Analog Devices Inc.
> > + */
> > +#include <linux/kernel.h>
> > +#include <linux/errno.h>
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/mii.h>
> > +#include <linux/phy.h>
> > +
> > +#define PHY_ID_ADIN1200 0x0283bc20
> > +#define PHY_ID_ADIN1300 0x0283bc30
> > +
> > +static int adin_config_init(struct phy_device *phydev)
> > +{
> > + int rc;
> > +
> > + rc = genphy_config_init(phydev);
> > + if (rc < 0)
> > + return rc;
> > +
> > + return 0;
> > +}
> > +
> > +static struct phy_driver adin_driver[] = {
> > + {
> > + .phy_id = PHY_ID_ADIN1200,
>
> You could use PHY_ID_MATCH_MODEL here.
>
> > + .name = "ADIN1200",
> > + .phy_id_mask = 0xfffffff0,
> > + .features = PHY_BASIC_FEATURES,
>
> Setting features is deprecated, instead the get_features callback
> should be implemented if the default genphy_read_abilities needs
> to be extended / replaced. You say that the PHY's work with the
> genphy driver, so I suppose the default feature detection is ok
> in your case. Then you could simply remove setting "features".
ack;
thanks for the info
>
> > + .config_init = adin_config_init,
> > + .config_aneg = genphy_config_aneg,
> > + .read_status = genphy_read_status,
> > + },
> > + {
> > + .phy_id = PHY_ID_ADIN1300,
> > + .name = "ADIN1300",
> > + .phy_id_mask = 0xfffffff0,
> > + .features = PHY_GBIT_FEATURES,
> > + .config_init = adin_config_init,
> > + .config_aneg = genphy_config_aneg,
> > + .read_status = genphy_read_status,
> > + },
> > +};
> > +
> > +module_phy_driver(adin_driver);
> > +
> > +static struct mdio_device_id __maybe_unused adin_tbl[] = {
> > + { PHY_ID_ADIN1200, 0xfffffff0 },
> > + { PHY_ID_ADIN1300, 0xfffffff0 },
>
> PHY_ID_MATCH_MODEL could be used here too.
ack;
will take a look
>
> > + { }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(mdio, adin_tbl);
> > +MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver");
> > +MODULE_LICENSE("GPL");
> >
Powered by blists - more mailing lists