[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Thu, 8 Aug 2019 22:09:36 +0200
From: Heiner Kallweit <hkallweit1@...il.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: Florian Fainelli <f.fainelli@...il.com>,
David Miller <davem@...emloft.net>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH net-next 1/3] net: phy: prepare phylib to deal with PHY's
extending Clause 22
On 08.08.2019 21:32, Andrew Lunn wrote:
> On Thu, Aug 08, 2019 at 09:03:42PM +0200, Heiner Kallweit wrote:
>> The integrated PHY in 2.5Gbps chip RTL8125 is the first (known to me)
>> PHY that uses standard Clause 22 for all modes up to 1Gbps and adds
>> 2.5Gbps control using vendor-specific registers. To use phylib for
>> the standard part little extensions are needed:
>> - Move most of genphy_config_aneg to a new function
>> __genphy_config_aneg that takes a parameter whether restarting
>> auto-negotiation is needed (depending on whether content of
>> vendor-specific advertisement register changed).
>> - Don't clear phydev->lp_advertising in genphy_read_status so that
>> we can set non-C22 mode flags before.
>>
>> Basically both changes mimic the behavior of the equivalent Clause 45
>> functions.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
>> ---
>> drivers/net/phy/phy_device.c | 35 +++++++++++++++--------------------
>> include/linux/phy.h | 8 +++++++-
>> 2 files changed, 22 insertions(+), 21 deletions(-)
>>
>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
>> index 7ddd91df9..bd7e7db8c 100644
>> --- a/drivers/net/phy/phy_device.c
>> +++ b/drivers/net/phy/phy_device.c
>> @@ -1571,11 +1571,9 @@ static int genphy_config_advert(struct phy_device *phydev)
>> /* Only allow advertising what this PHY supports */
>> linkmode_and(phydev->advertising, phydev->advertising,
>> phydev->supported);
>> - if (!ethtool_convert_link_mode_to_legacy_u32(&advertise,
>> - phydev->advertising))
>> - phydev_warn(phydev, "PHY advertising (%*pb) more modes than genphy supports, some modes not advertised.\n",
>> - __ETHTOOL_LINK_MODE_MASK_NBITS,
>> - phydev->advertising);
>> +
>> + ethtool_convert_link_mode_to_legacy_u32(&advertise,
>> + phydev->advertising);
>
> Hi Heiner
>
> linkmode_adv_to_mii_adv_t() would remove the need to use
> ethtool_convert_link_mode_to_legacy_u32(), and this warning would also
> go away.
>
Thanks for the hint! I'll check and submit a v2.
> Andrew
>
Heiner
Powered by blists - more mailing lists