[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Thu, 8 Aug 2019 22:39:32 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Heiner Kallweit <hkallweit1@...il.com>
Cc: Alexandru Ardelean <alexandru.ardelean@...log.com>,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, davem@...emloft.net,
robh+dt@...nel.org, mark.rutland@....com, f.fainelli@...il.com
Subject: Re: [PATCH v2 13/15] net: phy: adin: configure downshift on
config_init
On Thu, Aug 08, 2019 at 09:38:40PM +0200, Heiner Kallweit wrote:
> On 08.08.2019 14:30, Alexandru Ardelean wrote:
> > Down-speed auto-negotiation may not always be enabled, in which case the
> > PHY won't down-shift to 100 or 10 during auto-negotiation.
> >
> > This change enables downshift and configures the number of retries to
> > default 8 (maximum supported value).
> >
> > The change has been adapted from the Marvell PHY driver.
> >
> Instead of a fixed downshift setting (like in the Marvell driver) you
> may consider to implement the ethtool phy-tunable ETHTOOL_PHY_DOWNSHIFT.
Hi Alexandru
Upps, sorry, my bad.
I looked at marvell_set_downshift(), and assumed it was connected to
the phy-tunable. I have patches somewhere which does that. But they
have not made it into mainline yet.
> See the Aquantia PHY driver for an example.
Yes, that does have all the tunable stuff.
Andrew
Powered by blists - more mailing lists