| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190809103235.16338-8-tbogendoerfer@suse.de>
Date: Fri, 9 Aug 2019 12:32:29 +0200
From: Thomas Bogendoerfer <tbogendoerfer@...e.de>
To: Ralf Baechle <ralf@...ux-mips.org>,
Paul Burton <paul.burton@...s.com>,
James Hogan <jhogan@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Lee Jones <lee.jones@...aro.org>,
"David S. Miller" <davem@...emloft.net>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
Evgeniy Polyakov <zbr@...emap.net>, linux-mips@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-input@...r.kernel.org,
netdev@...r.kernel.org, linux-rtc@...r.kernel.org,
linux-serial@...r.kernel.org
Subject: [PATCH v4 7/9] mfd: ioc3: Add driver for SGI IOC3 chip
SGI IOC3 chip has integrated ethernet, keyboard and mouse interface.
It also supports connecting a SuperIO chip for serial and parallel
interfaces. IOC3 is used inside various SGI systemboards and add-on
cards with different equipped external interfaces.
Support for ethernet and serial interfaces were implemented inside
the network driver. This patchset moves out the not network related
parts to a new MFD driver, which takes care of card detection,
setup of platform devices and interrupt distribution for the subdevices.
Serial portion: Acked-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@...e.de>
---
arch/mips/include/asm/sn/ioc3.h | 345 +++----
arch/mips/sgi-ip27/ip27-timer.c | 20 -
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/ioc3.c | 586 +++++++++++
drivers/net/ethernet/sgi/Kconfig | 4 +-
drivers/net/ethernet/sgi/ioc3-eth.c | 1936 ++++++++++++++---------------------
drivers/tty/serial/8250/8250_ioc3.c | 98 ++
drivers/tty/serial/8250/Kconfig | 11 +
drivers/tty/serial/8250/Makefile | 1 +
10 files changed, 1601 insertions(+), 1414 deletions(-)
create mode 100644 drivers/mfd/ioc3.c
create mode 100644 drivers/tty/serial/8250/8250_ioc3.c
diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h
index 5022b0ab2074..89938fdce8ef 100644
--- a/arch/mips/include/asm/sn/ioc3.h
+++ b/arch/mips/include/asm/sn/ioc3.h
@@ -3,32 +3,43 @@
* Copyright (C) 1999, 2000 Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
-#ifndef _IOC3_H
-#define _IOC3_H
+#ifndef MIPS_SN_IOC3_H
+#define MIPS_SN_IOC3_H
#include <linux/types.h>
+/* serial port register map */
+struct ioc3_serialregs {
+ uint32_t sscr;
+ uint32_t stpir;
+ uint32_t stcir;
+ uint32_t srpir;
+ uint32_t srcir;
+ uint32_t srtr;
+ uint32_t shadow;
+};
+
/* SUPERIO uart register map */
-typedef volatile struct ioc3_uartregs {
+struct ioc3_uartregs {
union {
- volatile u8 rbr; /* read only, DLAB == 0 */
- volatile u8 thr; /* write only, DLAB == 0 */
- volatile u8 dll; /* DLAB == 1 */
+ char rbr; /* read only, DLAB == 0 */
+ char thr; /* write only, DLAB == 0 */
+ char dll; /* DLAB == 1 */
} u1;
union {
- volatile u8 ier; /* DLAB == 0 */
- volatile u8 dlm; /* DLAB == 1 */
+ char ier; /* DLAB == 0 */
+ char dlm; /* DLAB == 1 */
} u2;
union {
- volatile u8 iir; /* read only */
- volatile u8 fcr; /* write only */
+ char iir; /* read only */
+ char fcr; /* write only */
} u3;
- volatile u8 iu_lcr;
- volatile u8 iu_mcr;
- volatile u8 iu_lsr;
- volatile u8 iu_msr;
- volatile u8 iu_scr;
-} ioc3_uregs_t;
+ char iu_lcr;
+ char iu_mcr;
+ char iu_lsr;
+ char iu_msr;
+ char iu_scr;
+};
#define iu_rbr u1.rbr
#define iu_thr u1.thr
@@ -39,133 +50,122 @@ typedef volatile struct ioc3_uartregs {
#define iu_fcr u3.fcr
struct ioc3_sioregs {
- volatile u8 fill[0x141]; /* starts at 0x141 */
+ char fill[0x141]; /* starts at 0x141 */
- volatile u8 uartc;
- volatile u8 kbdcg;
+ char uartc;
+ char kbdcg;
- volatile u8 fill0[0x150 - 0x142 - 1];
+ char fill0[0x150 - 0x142 - 1];
- volatile u8 pp_data;
- volatile u8 pp_dsr;
- volatile u8 pp_dcr;
+ char pp_data;
+ char pp_dsr;
+ char pp_dcr;
- volatile u8 fill1[0x158 - 0x152 - 1];
+ char fill1[0x158 - 0x152 - 1];
- volatile u8 pp_fifa;
- volatile u8 pp_cfgb;
- volatile u8 pp_ecr;
+ char pp_fifa;
+ char pp_cfgb;
+ char pp_ecr;
- volatile u8 fill2[0x168 - 0x15a - 1];
+ char fill2[0x168 - 0x15a - 1];
- volatile u8 rtcad;
- volatile u8 rtcdat;
+ char rtcad;
+ char rtcdat;
- volatile u8 fill3[0x170 - 0x169 - 1];
+ char fill3[0x170 - 0x169 - 1];
struct ioc3_uartregs uartb; /* 0x20170 */
struct ioc3_uartregs uarta; /* 0x20178 */
};
+struct ioc3_ethregs {
+ uint32_t emcr; /* 0x000f0 */
+ uint32_t eisr; /* 0x000f4 */
+ uint32_t eier; /* 0x000f8 */
+ uint32_t ercsr; /* 0x000fc */
+ uint32_t erbr_h; /* 0x00100 */
+ uint32_t erbr_l; /* 0x00104 */
+ uint32_t erbar; /* 0x00108 */
+ uint32_t ercir; /* 0x0010c */
+ uint32_t erpir; /* 0x00110 */
+ uint32_t ertr; /* 0x00114 */
+ uint32_t etcsr; /* 0x00118 */
+ uint32_t ersr; /* 0x0011c */
+ uint32_t etcdc; /* 0x00120 */
+ uint32_t ebir; /* 0x00124 */
+ uint32_t etbr_h; /* 0x00128 */
+ uint32_t etbr_l; /* 0x0012c */
+ uint32_t etcir; /* 0x00130 */
+ uint32_t etpir; /* 0x00134 */
+ uint32_t emar_h; /* 0x00138 */
+ uint32_t emar_l; /* 0x0013c */
+ uint32_t ehar_h; /* 0x00140 */
+ uint32_t ehar_l; /* 0x00144 */
+ uint32_t micr; /* 0x00148 */
+ uint32_t midr_r; /* 0x0014c */
+ uint32_t midr_w; /* 0x00150 */
+};
+
+struct ioc3_serioregs {
+ uint32_t km_csr; /* 0x0009c */
+ uint32_t k_rd; /* 0x000a0 */
+ uint32_t m_rd; /* 0x000a4 */
+ uint32_t k_wd; /* 0x000a8 */
+ uint32_t m_wd; /* 0x000ac */
+};
+
/* Register layout of IOC3 in configuration space. */
struct ioc3 {
- volatile u32 pad0[7]; /* 0x00000 */
- volatile u32 sio_ir; /* 0x0001c */
- volatile u32 sio_ies; /* 0x00020 */
- volatile u32 sio_iec; /* 0x00024 */
- volatile u32 sio_cr; /* 0x00028 */
- volatile u32 int_out; /* 0x0002c */
- volatile u32 mcr; /* 0x00030 */
+ /* PCI Config Space registers */
+ uint32_t pci_id; /* 0x00000 */
+ uint32_t pci_scr; /* 0x00004 */
+ uint32_t pci_rev; /* 0x00008 */
+ uint32_t pci_lat; /* 0x0000c */
+ uint32_t pci_addr; /* 0x00010 */
+ uint32_t pci_err_addr_l; /* 0x00014 */
+ uint32_t pci_err_addr_h; /* 0x00018 */
+
+ uint32_t sio_ir; /* 0x0001c */
+ uint32_t sio_ies; /* 0x00020 */
+ uint32_t sio_iec; /* 0x00024 */
+ uint32_t sio_cr; /* 0x00028 */
+ uint32_t int_out; /* 0x0002c */
+ uint32_t mcr; /* 0x00030 */
/* General Purpose I/O registers */
- volatile u32 gpcr_s; /* 0x00034 */
- volatile u32 gpcr_c; /* 0x00038 */
- volatile u32 gpdr; /* 0x0003c */
- volatile u32 gppr_0; /* 0x00040 */
- volatile u32 gppr_1; /* 0x00044 */
- volatile u32 gppr_2; /* 0x00048 */
- volatile u32 gppr_3; /* 0x0004c */
- volatile u32 gppr_4; /* 0x00050 */
- volatile u32 gppr_5; /* 0x00054 */
- volatile u32 gppr_6; /* 0x00058 */
- volatile u32 gppr_7; /* 0x0005c */
- volatile u32 gppr_8; /* 0x00060 */
- volatile u32 gppr_9; /* 0x00064 */
- volatile u32 gppr_10; /* 0x00068 */
- volatile u32 gppr_11; /* 0x0006c */
- volatile u32 gppr_12; /* 0x00070 */
- volatile u32 gppr_13; /* 0x00074 */
- volatile u32 gppr_14; /* 0x00078 */
- volatile u32 gppr_15; /* 0x0007c */
+ uint32_t gpcr_s; /* 0x00034 */
+ uint32_t gpcr_c; /* 0x00038 */
+ uint32_t gpdr; /* 0x0003c */
+ uint32_t gppr[16]; /* 0x00040 */
/* Parallel Port Registers */
- volatile u32 ppbr_h_a; /* 0x00080 */
- volatile u32 ppbr_l_a; /* 0x00084 */
- volatile u32 ppcr_a; /* 0x00088 */
- volatile u32 ppcr; /* 0x0008c */
- volatile u32 ppbr_h_b; /* 0x00090 */
- volatile u32 ppbr_l_b; /* 0x00094 */
- volatile u32 ppcr_b; /* 0x00098 */
+ uint32_t ppbr_h_a; /* 0x00080 */
+ uint32_t ppbr_l_a; /* 0x00084 */
+ uint32_t ppcr_a; /* 0x00088 */
+ uint32_t ppcr; /* 0x0008c */
+ uint32_t ppbr_h_b; /* 0x00090 */
+ uint32_t ppbr_l_b; /* 0x00094 */
+ uint32_t ppcr_b; /* 0x00098 */
/* Keyboard and Mouse Registers */
- volatile u32 km_csr; /* 0x0009c */
- volatile u32 k_rd; /* 0x000a0 */
- volatile u32 m_rd; /* 0x000a4 */
- volatile u32 k_wd; /* 0x000a8 */
- volatile u32 m_wd; /* 0x000ac */
+ struct ioc3_serioregs serio;
/* Serial Port Registers */
- volatile u32 sbbr_h; /* 0x000b0 */
- volatile u32 sbbr_l; /* 0x000b4 */
- volatile u32 sscr_a; /* 0x000b8 */
- volatile u32 stpir_a; /* 0x000bc */
- volatile u32 stcir_a; /* 0x000c0 */
- volatile u32 srpir_a; /* 0x000c4 */
- volatile u32 srcir_a; /* 0x000c8 */
- volatile u32 srtr_a; /* 0x000cc */
- volatile u32 shadow_a; /* 0x000d0 */
- volatile u32 sscr_b; /* 0x000d4 */
- volatile u32 stpir_b; /* 0x000d8 */
- volatile u32 stcir_b; /* 0x000dc */
- volatile u32 srpir_b; /* 0x000e0 */
- volatile u32 srcir_b; /* 0x000e4 */
- volatile u32 srtr_b; /* 0x000e8 */
- volatile u32 shadow_b; /* 0x000ec */
-
- /* Ethernet Registers */
- volatile u32 emcr; /* 0x000f0 */
- volatile u32 eisr; /* 0x000f4 */
- volatile u32 eier; /* 0x000f8 */
- volatile u32 ercsr; /* 0x000fc */
- volatile u32 erbr_h; /* 0x00100 */
- volatile u32 erbr_l; /* 0x00104 */
- volatile u32 erbar; /* 0x00108 */
- volatile u32 ercir; /* 0x0010c */
- volatile u32 erpir; /* 0x00110 */
- volatile u32 ertr; /* 0x00114 */
- volatile u32 etcsr; /* 0x00118 */
- volatile u32 ersr; /* 0x0011c */
- volatile u32 etcdc; /* 0x00120 */
- volatile u32 ebir; /* 0x00124 */
- volatile u32 etbr_h; /* 0x00128 */
- volatile u32 etbr_l; /* 0x0012c */
- volatile u32 etcir; /* 0x00130 */
- volatile u32 etpir; /* 0x00134 */
- volatile u32 emar_h; /* 0x00138 */
- volatile u32 emar_l; /* 0x0013c */
- volatile u32 ehar_h; /* 0x00140 */
- volatile u32 ehar_l; /* 0x00144 */
- volatile u32 micr; /* 0x00148 */
- volatile u32 midr_r; /* 0x0014c */
- volatile u32 midr_w; /* 0x00150 */
- volatile u32 pad1[(0x20000 - 0x00154) / 4];
+ uint32_t sbbr_h; /* 0x000b0 */
+ uint32_t sbbr_l; /* 0x000b4 */
+ struct ioc3_serialregs port_a;
+ struct ioc3_serialregs port_b;
+
+ /* Ethernet Registers */
+ struct ioc3_ethregs eth;
+ uint32_t pad1[(0x20000 - 0x00154) / 4];
/* SuperIO Registers XXX */
struct ioc3_sioregs sregs; /* 0x20000 */
- volatile u32 pad2[(0x40000 - 0x20180) / 4];
+ uint32_t pad2[(0x40000 - 0x20180) / 4];
/* SSRAM Diagnostic Access */
- volatile u32 ssram[(0x80000 - 0x40000) / 4];
+ uint32_t ssram[(0x80000 - 0x40000) / 4];
/* Bytebus device offsets
0x80000 - Access to the generic devices selected with DEV0
@@ -178,6 +178,20 @@ struct ioc3 {
0xFFFFF bytebus DEV_SEL_3 */
};
+
+#define PCI_LAT 0xc /* Latency Timer */
+#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */
+#define UARTA_BASE 0x178
+#define UARTB_BASE 0x170
+
+/*
+ * Bytebus device space
+ */
+#define IOC3_BYTEBUS_DEV0 0x80000L
+#define IOC3_BYTEBUS_DEV1 0xa0000L
+#define IOC3_BYTEBUS_DEV2 0xc0000L
+#define IOC3_BYTEBUS_DEV3 0xe0000L
+
/*
* Ethernet RX Buffer
*/
@@ -233,28 +247,20 @@ struct ioc3_etxd {
#define ETXD_B2CNT_MASK 0x7ff00000
#define ETXD_B2CNT_SHIFT 20
-/*
- * Bytebus device space
- */
-#define IOC3_BYTEBUS_DEV0 0x80000L
-#define IOC3_BYTEBUS_DEV1 0xa0000L
-#define IOC3_BYTEBUS_DEV2 0xc0000L
-#define IOC3_BYTEBUS_DEV3 0xe0000L
-
/* ------------------------------------------------------------------------- */
/* Superio Registers (PIO Access) */
#define IOC3_SIO_BASE 0x20000
#define IOC3_SIO_UARTC (IOC3_SIO_BASE+0x141) /* UART Config */
#define IOC3_SIO_KBDCG (IOC3_SIO_BASE+0x142) /* KBD Config */
-#define IOC3_SIO_PP_BASE (IOC3_SIO_BASE+PP_BASE) /* Parallel Port */
+#define IOC3_SIO_PP_BASE (IOC3_SIO_BASE+PP_BASE) /* Parallel Port */
#define IOC3_SIO_RTC_BASE (IOC3_SIO_BASE+0x168) /* Real Time Clock */
#define IOC3_SIO_UB_BASE (IOC3_SIO_BASE+UARTB_BASE) /* UART B */
#define IOC3_SIO_UA_BASE (IOC3_SIO_BASE+UARTA_BASE) /* UART A */
/* SSRAM Diagnostic Access */
#define IOC3_SSRAM IOC3_RAM_OFF /* base of SSRAM diagnostic access */
-#define IOC3_SSRAM_LEN 0x40000 /* 256kb (address space size, may not be fully populated) */
+#define IOC3_SSRAM_LEN 0x40000 /* 256kb (addrspc sz, may not be populated) */
#define IOC3_SSRAM_DM 0x0000ffff /* data mask */
#define IOC3_SSRAM_PM 0x00010000 /* parity mask */
@@ -294,10 +300,10 @@ struct ioc3_etxd {
SIO_IR to assert */
#define KM_CSR_M_TO_EN 0x00080000 /* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause
SIO_IR to assert */
-#define KM_CSR_K_CLAMP_ONE 0x00100000 /* Pull K_CLK low after rec. one char */
-#define KM_CSR_M_CLAMP_ONE 0x00200000 /* Pull M_CLK low after rec. one char */
-#define KM_CSR_K_CLAMP_THREE 0x00400000 /* Pull K_CLK low after rec. three chars */
-#define KM_CSR_M_CLAMP_THREE 0x00800000 /* Pull M_CLK low after rec. three char */
+#define KM_CSR_K_CLAMP_1 0x00100000 /* Pull K_CLK low aft recv 1 char */
+#define KM_CSR_M_CLAMP_1 0x00200000 /* Pull M_CLK low aft recv 1 char */
+#define KM_CSR_K_CLAMP_3 0x00400000 /* Pull K_CLK low aft recv 3 chars */
+#define KM_CSR_M_CLAMP_3 0x00800000 /* Pull M_CLK low aft recv 3 chars */
/* bitmasks for IOC3_K_RD and IOC3_M_RD */
#define KM_RD_DATA_2 0x000000ff /* 3rd char recvd since last read */
@@ -440,10 +446,6 @@ struct ioc3_etxd {
SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1)
-/* macro to load pending interrupts */
-#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \
- PCI_INW(&((mem)->sio_ies_ro)))
-
/* bitmasks for SIO_CR */
#define SIO_CR_SIO_RESET 0x00000001 /* reset the SIO */
#define SIO_CR_SER_A_BASE 0x000000fe /* DMA poll addr port A */
@@ -500,10 +502,11 @@ struct ioc3_etxd {
#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */
#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */
-#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */
-#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin controlling uart b mode select */
-#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin controlling uart a mode select */
+#define GPPR_PHY_RESET_PIN 5 /* GIO pin cntrlling phy reset */
+#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin cntrlling uart b mode sel */
+#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin cntrlling uart a mode sel */
+/* ethernet */
#define EMCR_DUPLEX 0x00000001
#define EMCR_PROMISC 0x00000002
#define EMCR_PADEN 0x00000004
@@ -595,71 +598,9 @@ struct ioc3_etxd {
#define MIDR_DATA_MASK 0x0000ffff
-#define ERXBUF_IPCKSUM_MASK 0x0000ffff
-#define ERXBUF_BYTECNT_MASK 0x07ff0000
-#define ERXBUF_BYTECNT_SHIFT 16
-#define ERXBUF_V 0x80000000
-
-#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */
-#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */
-#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */
-#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */
-#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */
-#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */
-#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */
-#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */
-#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */
-#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */
-#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */
-#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */
-
-#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */
-#define ETXD_INTWHENDONE 0x00001000 /* intr when done */
-#define ETXD_D0V 0x00010000 /* data 0 valid */
-#define ETXD_B1V 0x00020000 /* buf 1 valid */
-#define ETXD_B2V 0x00040000 /* buf 2 valid */
-#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */
-#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */
-#define ETXD_CHKOFF_SHIFT 20
-
-#define ETXD_D0CNT_MASK 0x0000007f
-#define ETXD_B1CNT_MASK 0x0007ff00
-#define ETXD_B1CNT_SHIFT 8
-#define ETXD_B2CNT_MASK 0x7ff00000
-#define ETXD_B2CNT_SHIFT 20
-
-typedef enum ioc3_subdevs_e {
- ioc3_subdev_ether,
- ioc3_subdev_generic,
- ioc3_subdev_nic,
- ioc3_subdev_kbms,
- ioc3_subdev_ttya,
- ioc3_subdev_ttyb,
- ioc3_subdev_ecpp,
- ioc3_subdev_rt,
- ioc3_nsubdevs
-} ioc3_subdev_t;
-
-/* subdevice disable bits,
- * from the standard INFO_LBL_SUBDEVS
- */
-#define IOC3_SDB_ETHER (1<<ioc3_subdev_ether)
-#define IOC3_SDB_GENERIC (1<<ioc3_subdev_generic)
-#define IOC3_SDB_NIC (1<<ioc3_subdev_nic)
-#define IOC3_SDB_KBMS (1<<ioc3_subdev_kbms)
-#define IOC3_SDB_TTYA (1<<ioc3_subdev_ttya)
-#define IOC3_SDB_TTYB (1<<ioc3_subdev_ttyb)
-#define IOC3_SDB_ECPP (1<<ioc3_subdev_ecpp)
-#define IOC3_SDB_RT (1<<ioc3_subdev_rt)
-
-#define IOC3_ALL_SUBDEVS ((1<<ioc3_nsubdevs)-1)
-
-#define IOC3_SDB_SERIAL (IOC3_SDB_TTYA|IOC3_SDB_TTYB)
-
-#define IOC3_STD_SUBDEVS IOC3_ALL_SUBDEVS
-
-#define IOC3_INTA_SUBDEVS IOC3_SDB_ETHER
-#define IOC3_INTB_SUBDEVS (IOC3_SDB_GENERIC|IOC3_SDB_KBMS|IOC3_SDB_SERIAL|IOC3_SDB_ECPP|IOC3_SDB_RT)
+#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP30)
+extern int bridge_alloc_irq(struct pci_dev *dev);
+#endif
/* subsystem IDs supplied by card detection in pci-xtalk-bridge */
#define IOC3_SUBSYS_IP27_BASEIO6G 0xc300
@@ -670,4 +611,4 @@ typedef enum ioc3_subdevs_e {
#define IOC3_SUBSYS_MENET 0xc305
#define IOC3_SUBSYS_MENET4 0xc306
-#endif /* _IOC3_H */
+#endif /* MIPS_SN_IOC3_H */
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 9b4b9ac621a3..5631e93ea350 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -188,23 +188,3 @@ void hub_rtc_init(cnodeid_t cnode)
LOCAL_HUB_S(PI_RT_PEND_B, 0);
}
}
-
-static int __init sgi_ip27_rtc_devinit(void)
-{
- struct resource res;
-
- memset(&res, 0, sizeof(res));
- res.start = XPHYSADDR(KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base +
- IOC3_BYTEBUS_DEV0);
- res.end = res.start + 32767;
- res.flags = IORESOURCE_MEM;
-
- return IS_ERR(platform_device_register_simple("rtc-m48t35", -1,
- &res, 1));
-}
-
-/*
- * kludge make this a device_initcall after ioc3 resource conflicts
- * are resolved
- */
-late_initcall(sgi_ip27_rtc_devinit);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f129f9678940..6d3908267a6a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2019,5 +2019,18 @@ config RAVE_SP_CORE
Select this to get support for the Supervisory Processor
device found on several devices in RAVE line of hardware.
+config SGI_MFD_IOC3
+ tristate "SGI IOC3 core driver"
+ depends on PCI && MIPS
+ select MFD_CORE
+ help
+ This option enables basic support for the SGI IOC3-based
+ controller cards. This option does not enable any specific
+ functions on such a card, but provides necessary infrastructure
+ for other drivers to utilize.
+
+ If you have an SGI Origin, Octane, or a PCI IOC3 card,
+ then say Y. Otherwise say N.
+
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f026ada68f6a..fb523eaa358a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -257,3 +257,4 @@ obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
obj-$(CONFIG_MFD_STMFX) += stmfx.o
+obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
diff --git a/drivers/mfd/ioc3.c b/drivers/mfd/ioc3.c
new file mode 100644
index 000000000000..5bcb3461a189
--- /dev/null
+++ b/drivers/mfd/ioc3.c
@@ -0,0 +1,586 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 multifunction device driver
+ *
+ * Copyright (C) 2018, 2019 Thomas Bogendoerfer <tbogendoerfer@...e.de>
+ *
+ * Based on work by:
+ * Stanislaw Skowronek <skylark@...ligned.org>
+ * Joshua Kinard <kumba@...too.org>
+ * Brent Casavant <bcasavan@....com> - IOC4 master driver
+ * Pat Gefre <pfg@....com> - IOC3 serial port IRQ demuxer
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/sgi-w1.h>
+#include <linux/rtc/ds1685.h>
+
+#include <asm/pci/bridge.h>
+#include <asm/sn/ioc3.h>
+
+#define IOC3_IRQ_SERIAL_A 6
+#define IOC3_IRQ_SERIAL_B 15
+#define IOC3_IRQ_KBD 22
+#define IOC3_IRQ_ETH_DOMAIN 23
+
+/* Bitmask for selecting which IRQs are level triggered */
+#define IOC3_LVL_MASK (BIT(IOC3_IRQ_SERIAL_A) | BIT(IOC3_IRQ_SERIAL_B))
+
+#define M48T35_REG_SIZE 32768 /* size of m48t35 registers */
+
+/* 1.2 us latency timer (40 cycles at 33 MHz) */
+#define IOC3_LATENCY 40
+
+struct ioc3_priv_data {
+ struct irq_domain *domain;
+ struct ioc3 __iomem *regs;
+ struct pci_dev *pdev;
+ int domain_irq;
+};
+
+static void ioc3_irq_ack(struct irq_data *d)
+{
+ struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
+ unsigned int hwirq = irqd_to_hwirq(d);
+
+ writel(BIT(hwirq), &ipd->regs->sio_ir);
+}
+
+static void ioc3_irq_mask(struct irq_data *d)
+{
+ struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
+ unsigned int hwirq = irqd_to_hwirq(d);
+
+ writel(BIT(hwirq), &ipd->regs->sio_iec);
+}
+
+static void ioc3_irq_unmask(struct irq_data *d)
+{
+ struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
+ unsigned int hwirq = irqd_to_hwirq(d);
+
+ writel(BIT(hwirq), &ipd->regs->sio_ies);
+}
+
+static struct irq_chip ioc3_irq_chip = {
+ .name = "IOC3",
+ .irq_ack = ioc3_irq_ack,
+ .irq_mask = ioc3_irq_mask,
+ .irq_unmask = ioc3_irq_unmask,
+};
+
+static int ioc3_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ /* Set level IRQs for every interrupt contained in IOC3_LVL_MASK */
+ if (BIT(hwirq) & IOC3_LVL_MASK)
+ irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_level_irq);
+ else
+ irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_edge_irq);
+
+ irq_set_chip_data(irq, d->host_data);
+ return 0;
+}
+
+static const struct irq_domain_ops ioc3_irq_domain_ops = {
+ .map = ioc3_irq_domain_map,
+};
+
+static void ioc3_irq_handler(struct irq_desc *desc)
+{
+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
+ struct ioc3_priv_data *ipd = domain->host_data;
+ struct ioc3 __iomem *regs = ipd->regs;
+ u32 pending, mask;
+ unsigned int irq;
+
+ pending = readl(®s->sio_ir);
+ mask = readl(®s->sio_ies);
+ pending &= mask; /* mask off not enabled but pending irqs */
+
+ if (mask & BIT(IOC3_IRQ_ETH_DOMAIN))
+ /* if eth irq is enabled we need to check in eth irq regs */
+ if (readl(®s->eth.eisr) & readl(®s->eth.eier))
+ pending |= IOC3_IRQ_ETH_DOMAIN;
+
+ if (pending) {
+ irq = irq_find_mapping(domain, __ffs(pending));
+ if (irq)
+ generic_handle_irq(irq);
+ } else {
+ spurious_interrupt();
+ }
+}
+
+/*
+ * System boards/BaseIOs use more interrupt pins of the bridge ASIC
+ * to which the IOC3 is connected. Since the IOC3 MFD driver
+ * knows wiring of these extra pins, we use the map_irq function
+ * to get interrupts activated
+ */
+static int ioc3_map_irq(struct pci_dev *pdev, int pin)
+{
+ struct pci_host_bridge *hbrg = pci_find_host_bridge(pdev->bus);
+
+ return hbrg->map_irq(pdev, pin, 0);
+}
+
+static int ioc3_irq_domain_setup(struct ioc3_priv_data *ipd, int irq)
+{
+ struct irq_domain *domain;
+ struct fwnode_handle *fn;
+
+ fn = irq_domain_alloc_named_fwnode("IOC3");
+ if (!fn)
+ goto err;
+
+ domain = irq_domain_create_linear(fn, 24, &ioc3_irq_domain_ops, ipd);
+ if (!domain)
+ goto err;
+
+ irq_domain_free_fwnode(fn);
+ ipd->domain = domain;
+
+ irq_set_chained_handler_and_data(irq, ioc3_irq_handler, domain);
+ ipd->domain_irq = irq;
+ return 0;
+
+err:
+ dev_err(&ipd->pdev->dev, "irq domain setup failed\n");
+ return -ENOMEM;
+}
+
+static struct resource ioc3_uarta_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uarta),
+ sizeof_field(struct ioc3, sregs.uarta)),
+ DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_A)
+};
+
+static struct resource ioc3_uartb_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uartb),
+ sizeof_field(struct ioc3, sregs.uartb)),
+ DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_B)
+};
+
+static struct mfd_cell ioc3_serial_cells[] = {
+ {
+ .name = "ioc3-serial8250",
+ .resources = ioc3_uarta_resources,
+ .num_resources = ARRAY_SIZE(ioc3_uarta_resources),
+ },
+ {
+ .name = "ioc3-serial8250",
+ .resources = ioc3_uartb_resources,
+ .num_resources = ARRAY_SIZE(ioc3_uartb_resources),
+ }
+};
+
+static int ioc3_serial_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ /* set gpio pins for RS232/RS422 mode selection */
+ writel(GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL,
+ &ipd->regs->gpcr_s);
+ /* select RS232 mode for uart a */
+ writel(0, &ipd->regs->gppr[6]);
+ /* select RS232 mode for uart b */
+ writel(0, &ipd->regs->gppr[7]);
+
+ /* switch both ports to 16650 mode */
+ writel(readl(&ipd->regs->port_a.sscr) & ~SSCR_DMA_EN,
+ &ipd->regs->port_a.sscr);
+ writel(readl(&ipd->regs->port_b.sscr) & ~SSCR_DMA_EN,
+ &ipd->regs->port_b.sscr);
+ udelay(1000); /* wait until mode switch is done */
+
+ ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
+ ioc3_serial_cells, ARRAY_SIZE(ioc3_serial_cells),
+ &ipd->pdev->resource[0], 0, ipd->domain);
+ if (ret) {
+ dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct resource ioc3_kbd_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, serio),
+ sizeof_field(struct ioc3, serio)),
+ DEFINE_RES_IRQ(IOC3_IRQ_KBD)
+};
+
+static struct mfd_cell ioc3_kbd_cells[] = {
+ {
+ .name = "ioc3-kbd",
+ .resources = ioc3_kbd_resources,
+ .num_resources = ARRAY_SIZE(ioc3_kbd_resources),
+ }
+};
+
+static int ioc3_kbd_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
+ ioc3_kbd_cells, ARRAY_SIZE(ioc3_kbd_cells),
+ &ipd->pdev->resource[0], 0, ipd->domain);
+ if (ret) {
+ dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct resource ioc3_eth_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, eth),
+ sizeof_field(struct ioc3, eth)),
+ DEFINE_RES_MEM(offsetof(struct ioc3, ssram),
+ sizeof_field(struct ioc3, ssram)),
+ DEFINE_RES_IRQ(0)
+};
+
+static struct resource ioc3_w1_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, mcr),
+ sizeof_field(struct ioc3, mcr)),
+};
+static struct sgi_w1_platform_data ioc3_w1_platform_data;
+
+static struct mfd_cell ioc3_eth_cells[] = {
+ {
+ .name = "ioc3-eth",
+ .resources = ioc3_eth_resources,
+ .num_resources = ARRAY_SIZE(ioc3_eth_resources),
+ },
+ {
+ .name = "sgi_w1",
+ .resources = ioc3_w1_resources,
+ .num_resources = ARRAY_SIZE(ioc3_w1_resources),
+ .platform_data = &ioc3_w1_platform_data,
+ .pdata_size = sizeof(ioc3_w1_platform_data),
+ }
+};
+
+static int ioc3_eth_setup(struct ioc3_priv_data *ipd, bool use_domain)
+{
+ int irq = ipd->pdev->irq;
+ int ret;
+
+ /* enable One-Wire bus */
+ writel(GPCR_MLAN_EN, &ipd->regs->gpcr_s);
+
+ /* generate unique identifier */
+ snprintf(ioc3_w1_platform_data.dev_id,
+ sizeof(ioc3_w1_platform_data.dev_id), "ioc3-%012llx",
+ ipd->pdev->resource->start);
+
+ if (use_domain)
+ irq = irq_create_mapping(ipd->domain, IOC3_IRQ_ETH_DOMAIN);
+
+ ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
+ ioc3_eth_cells, ARRAY_SIZE(ioc3_eth_cells),
+ &ipd->pdev->resource[0], irq, NULL);
+ if (ret) {
+ dev_err(&ipd->pdev->dev, "Failed to add ETH/W1 subdev\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct resource ioc3_m48t35_resources[] = {
+ DEFINE_RES_MEM(IOC3_BYTEBUS_DEV0, M48T35_REG_SIZE)
+};
+
+static struct mfd_cell ioc3_m48t35_cells[] = {
+ {
+ .name = "rtc-m48t35",
+ .resources = ioc3_m48t35_resources,
+ .num_resources = ARRAY_SIZE(ioc3_m48t35_resources),
+ }
+};
+
+static int ioc3_m48t35_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
+ ioc3_m48t35_cells, ARRAY_SIZE(ioc3_m48t35_cells),
+ &ipd->pdev->resource[0], 0, ipd->domain);
+ if (ret)
+ dev_err(&ipd->pdev->dev, "Failed to add M48T35 subdev\n");
+
+ return ret;
+}
+
+static int ip27_baseio_setup(struct ioc3_priv_data *ipd)
+{
+ int ret, io_irq;
+
+ io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn) + 2);
+ ret = ioc3_irq_domain_setup(ipd, io_irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_eth_setup(ipd, false);
+ if (ret)
+ return ret;
+
+ ret = ioc3_serial_setup(ipd);
+ if (ret)
+ return ret;
+
+ return ioc3_m48t35_setup(ipd);
+}
+
+static int ip27_baseio6g_setup(struct ioc3_priv_data *ipd)
+{
+ int ret, io_irq;
+
+ io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn) + 2);
+ ret = ioc3_irq_domain_setup(ipd, io_irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_eth_setup(ipd, false);
+ if (ret)
+ return ret;
+
+ ret = ioc3_serial_setup(ipd);
+ if (ret)
+ return ret;
+
+ ret = ioc3_m48t35_setup(ipd);
+ if (ret)
+ return ret;
+
+ return ioc3_kbd_setup(ipd);
+}
+
+static int ip27_mio_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ ret = ioc3_irq_domain_setup(ipd, ipd->pdev->irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_serial_setup(ipd);
+ if (ret)
+ return ret;
+
+ return ioc3_kbd_setup(ipd);
+}
+
+static int ip29_sysboard_setup(struct ioc3_priv_data *ipd)
+{
+ int ret, io_irq;
+
+ io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn) + 1);
+ ret = ioc3_irq_domain_setup(ipd, io_irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_eth_setup(ipd, false);
+ if (ret)
+ return ret;
+
+ ret = ioc3_serial_setup(ipd);
+ if (ret)
+ return ret;
+
+ ret = ioc3_m48t35_setup(ipd);
+ if (ret)
+ return ret;
+
+ return ioc3_kbd_setup(ipd);
+}
+
+static int ioc3_menet_setup(struct ioc3_priv_data *ipd)
+{
+ int ret, io_irq;
+
+ io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn) + 4);
+ ret = ioc3_irq_domain_setup(ipd, io_irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_eth_setup(ipd, false);
+ if (ret)
+ return ret;
+
+ return ioc3_serial_setup(ipd);
+}
+
+static int ioc3_menet4_setup(struct ioc3_priv_data *ipd)
+{
+ return ioc3_eth_setup(ipd, false);
+}
+
+static int ioc3_cad_duo_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ ret = ioc3_irq_domain_setup(ipd, ipd->pdev->irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_eth_setup(ipd, true);
+ if (ret)
+ return ret;
+
+ return ioc3_kbd_setup(ipd);
+}
+
+/* Helper macro for filling ioc3_info array */
+#define IOC3_SID(_name, _sid, _setup) \
+ { \
+ .name = _name, \
+ .sid = (PCI_VENDOR_ID_SGI << 16) | IOC3_SUBSYS_ ## _sid, \
+ .setup = _setup, \
+ }
+
+static struct {
+ const char *name;
+ u32 sid;
+ int (*setup)(struct ioc3_priv_data *ipd);
+} ioc3_infos[] = {
+ IOC3_SID("IP27 BaseIO6G", IP27_BASEIO6G, &ip27_baseio6g_setup),
+ IOC3_SID("IP27 MIO", IP27_MIO, &ip27_mio_setup),
+ IOC3_SID("IP27 BaseIO", IP27_BASEIO, &ip27_baseio_setup),
+ IOC3_SID("IP29 System Board", IP29_SYSBOARD, &ip29_sysboard_setup),
+ IOC3_SID("MENET", MENET, &ioc3_menet_setup),
+ IOC3_SID("MENET4", MENET4, &ioc3_menet4_setup)
+};
+#undef IOC3_SID
+
+static int ioc3_setup(struct ioc3_priv_data *ipd)
+{
+ u32 sid;
+ int i;
+
+ /* Clear IRQs */
+ writel(~0, &ipd->regs->sio_iec);
+ writel(~0, &ipd->regs->sio_ir);
+ writel(0, &ipd->regs->eth.eier);
+ writel(~0, &ipd->regs->eth.eisr);
+
+ /* read subsystem vendor id and subsystem id */
+ pci_read_config_dword(ipd->pdev, PCI_SUBSYSTEM_VENDOR_ID, &sid);
+
+ for (i = 0; i < ARRAY_SIZE(ioc3_infos); i++)
+ if (sid == ioc3_infos[i].sid) {
+ pr_info("ioc3: %s\n", ioc3_infos[i].name);
+ return ioc3_infos[i].setup(ipd);
+ }
+
+ /* treat everything not identified by PCI subid as CAD DUO */
+ pr_info("ioc3: CAD DUO\n");
+ return ioc3_cad_duo_setup(ipd);
+}
+
+static int ioc3_mfd_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pci_id)
+{
+ struct ioc3_priv_data *ipd;
+ struct ioc3 __iomem *regs;
+ int ret;
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, IOC3_LATENCY);
+ pci_set_master(pdev);
+
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (ret) {
+ dev_warn(&pdev->dev,
+ "Failed to set 64-bit DMA mask, trying 32-bit\n");
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "Can't set DMA mask, aborting\n");
+ return ret;
+ }
+ }
+
+ /* Set up per-IOC3 data */
+ ipd = devm_kzalloc(&pdev->dev, sizeof(struct ioc3_priv_data),
+ GFP_KERNEL);
+ if (!ipd) {
+ ret = -ENOMEM;
+ goto out_disable_device;
+ }
+ ipd->pdev = pdev;
+
+ /*
+ * Map all IOC3 registers. These are shared between subdevices
+ * so the main IOC3 module manages them.
+ */
+ regs = pci_ioremap_bar(pdev, 0);
+ if (!regs) {
+ dev_warn(&pdev->dev, "ioc3: Unable to remap PCI BAR for %s.\n",
+ pci_name(pdev));
+ ret = -ENOMEM;
+ goto out_disable_device;
+ }
+ ipd->regs = regs;
+
+ /* Track PCI-device specific data */
+ pci_set_drvdata(pdev, ipd);
+
+ ret = ioc3_setup(ipd);
+ if (ret)
+ goto out_disable_device;
+
+ return 0;
+
+out_disable_device:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void ioc3_mfd_remove(struct pci_dev *pdev)
+{
+ struct ioc3_priv_data *ipd;
+
+ ipd = pci_get_drvdata(pdev);
+
+ /* Clear and disable all IRQs */
+ writel(~0, &ipd->regs->sio_iec);
+ writel(~0, &ipd->regs->sio_ir);
+
+ /* Release resources */
+ if (ipd->domain) {
+ irq_domain_remove(ipd->domain);
+ free_irq(ipd->domain_irq, (void *)ipd);
+ }
+ pci_disable_device(pdev);
+}
+
+static struct pci_device_id ioc3_mfd_id_table[] = {
+ { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, ioc3_mfd_id_table);
+
+static struct pci_driver ioc3_mfd_driver = {
+ .name = "IOC3",
+ .id_table = ioc3_mfd_id_table,
+ .probe = ioc3_mfd_probe,
+ .remove = ioc3_mfd_remove,
+};
+
+module_pci_driver(ioc3_mfd_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@...e.de>");
+MODULE_DESCRIPTION("SGI IOC3 MFD driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig
index 37f048e1230c..32a72b532605 100644
--- a/drivers/net/ethernet/sgi/Kconfig
+++ b/drivers/net/ethernet/sgi/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_SGI
bool "SGI devices"
default y
- depends on (PCI && SGI_IP27) || SGI_IP32
+ depends on (PCI && SGI_MFD_IOC3) || SGI_IP32
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -19,7 +19,7 @@ if NET_VENDOR_SGI
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
- depends on PCI && SGI_IP27
+ depends on PCI && SGI_MFD_IOC3
select CRC32
select MII
---help---
diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index 358e66b81926..89a39bb1f205 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -7,6 +7,8 @@
*
* Copyright (C) 1999, 2000, 01, 03, 06 Ralf Baechle
* Copyright (C) 1995, 1999, 2000, 2001 by Silicon Graphics, Inc.
+ * Copyright (C) 2005 Stanislaw Skowronek (port to meta-driver)
+ * 2009 Johannes Dickgreber <tanzy@....de>
*
* References:
* o IOC3 ASIC specification 4.51, 1996-04-18
@@ -20,8 +22,6 @@
* o Use prefetching for large packets. What is a good lower limit for
* prefetching?
* o We're probably allocating a bit too much memory.
- * o Use hardware checksums.
- * o Convert to using a IOC3 meta driver.
* o Which PHYs might possibly be attached to the IOC3 in real live,
* which workarounds are required for them? Do we ever have Lucent's?
* o For the 2.5 branch kill the mii-tool ioctls.
@@ -30,484 +30,224 @@
#define IOC3_NAME "ioc3-eth"
#define IOC3_VERSION "2.6.3-4"
+#include <net/ip.h>
+
+#include <linux/crc16.h>
+#include <linux/crc32.h>
#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/crc32.h>
#include <linux/mii.h>
-#include <linux/in.h>
-#include <linux/ip.h>
+#include <linux/netdevice.h>
#include <linux/tcp.h>
#include <linux/udp.h>
-#include <linux/dma-mapping.h>
+#include <linux/module.h>
#include <linux/gfp.h>
+#include <linux/platform_device.h>
+#include <linux/nvmem-consumer.h>
-#ifdef CONFIG_SERIAL_8250
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#endif
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/skbuff.h>
-#include <net/ip.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <linux/uaccess.h>
-#include <asm/sn/types.h>
#include <asm/sn/ioc3.h>
#include <asm/pci/bridge.h>
+#define CRC16_INIT 0
+#define CRC16_VALID 0xb001
+
+#define IOC3_CACHELINE 128UL
+
/*
* 64 RX buffers. This is tunable in the range of 16 <= x < 512. The
* value must be a power of two.
*/
-#define RX_BUFFS 64
+#define RX_BUFFS 512
+#define RX_MASK (RX_BUFFS - 1)
+
+/* 128 TX buffers (not tunable) */
+#define TX_BUFFS 128
+#define TX_MASK (TX_BUFFS - 1)
-#define ETCSR_FD ((17<<ETCSR_IPGR2_SHIFT) | (11<<ETCSR_IPGR1_SHIFT) | 21)
-#define ETCSR_HD ((21<<ETCSR_IPGR2_SHIFT) | (21<<ETCSR_IPGR1_SHIFT) | 21)
+/* BEWARE: The IOC3 documentation documents the size of rx buffers as
+ * 1644 while it's actually 1664. This one was nasty to track down...
+ */
+#define RX_OFFSET 18
+#define RX_BUF_SIZE 1664
+#define RX_BUF_ALLOC_SIZE (RX_BUF_SIZE + RX_OFFSET + IOC3_CACHELINE)
-/* Private per NIC data of the driver. */
+/* Private per NIC data of the driver. */
struct ioc3_private {
- struct ioc3 *regs;
+ struct ioc3_ethregs *regs;
+ u32 *ssram;
unsigned long *rxr; /* pointer to receiver ring */
struct ioc3_etxd *txr;
- struct sk_buff *rx_skbs[512];
- struct sk_buff *tx_skbs[128];
+ struct sk_buff *rx_skbs[RX_BUFFS];
+ struct sk_buff *tx_skbs[TX_BUFFS];
int rx_ci; /* RX consumer index */
int rx_pi; /* RX producer index */
int tx_ci; /* TX consumer index */
int tx_pi; /* TX producer index */
- int txqlen;
+ int txbfree;
u32 emcr, ehar_h, ehar_l;
spinlock_t ioc3_lock;
struct mii_if_info mii;
+ unsigned long flags;
+ #define IOC3_FLAG_RX_CHECKSUMS 1
- struct net_device *dev;
- struct pci_dev *pdev;
-
- /* Members used by autonegotiation */
struct timer_list ioc3_timer;
};
-static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static void ioc3_set_multicast_list(struct net_device *dev);
-static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static void ioc3_timeout(struct net_device *dev);
-static inline unsigned int ioc3_hash(const unsigned char *addr);
-static inline void ioc3_stop(struct ioc3_private *ip);
-static void ioc3_init(struct net_device *dev);
-
-static const char ioc3_str[] = "IOC3 Ethernet";
-static const struct ethtool_ops ioc3_ethtool_ops;
-
/* We use this to acquire receive skb's that we can DMA directly into. */
-
-#define IOC3_CACHELINE 128UL
-
static inline unsigned long aligned_rx_skb_addr(unsigned long addr)
{
- return (~addr + 1) & (IOC3_CACHELINE - 1UL);
+ return ((addr + 127) & ~127UL) - addr;
}
-static inline struct sk_buff * ioc3_alloc_skb(unsigned long length,
- unsigned int gfp_mask)
+static struct sk_buff *ioc3_alloc_skb(struct net_device *dev)
{
struct sk_buff *skb;
- skb = alloc_skb(length + IOC3_CACHELINE - 1, gfp_mask);
+ skb = alloc_skb(RX_BUF_ALLOC_SIZE + IOC3_CACHELINE - 1, GFP_ATOMIC);
if (likely(skb)) {
int offset = aligned_rx_skb_addr((unsigned long) skb->data);
if (offset)
skb_reserve(skb, offset);
+ skb->dev = dev;
}
return skb;
}
-static inline unsigned long ioc3_map(void *ptr, unsigned long vdev)
+static unsigned long ioc3_map(void *ptr, unsigned long dma_attr)
{
#ifdef CONFIG_SGI_IP27
- vdev <<= 57; /* Shift to PCI64_ATTR_VIRTUAL */
-
- return vdev | (0xaUL << PCI64_ATTR_TARG_SHFT) | PCI64_ATTR_PREF |
- ((unsigned long)ptr & TO_PHYS_MASK);
+ return ((0xaUL << PCI64_ATTR_TARG_SHFT) | dma_attr |
+ ((unsigned long)ptr & TO_PHYS_MASK));
#else
return virt_to_bus(ptr);
#endif
}
-/* BEWARE: The IOC3 documentation documents the size of rx buffers as
- 1644 while it's actually 1664. This one was nasty to track down ... */
-#define RX_OFFSET 10
-#define RX_BUF_ALLOC_SIZE (1664 + RX_OFFSET + IOC3_CACHELINE)
-
-/* DMA barrier to separate cached and uncached accesses. */
-#define BARRIER() \
- __asm__("sync" ::: "memory")
-
-
-#define IOC3_SIZE 0x100000
-
-/*
- * IOC3 is a big endian device
- *
- * Unorthodox but makes the users of these macros more readable - the pointer
- * to the IOC3's memory mapped registers is expected as struct ioc3 * ioc3
- * in the environment.
- */
-#define ioc3_r_mcr() be32_to_cpu(ioc3->mcr)
-#define ioc3_w_mcr(v) do { ioc3->mcr = cpu_to_be32(v); } while (0)
-#define ioc3_w_gpcr_s(v) do { ioc3->gpcr_s = cpu_to_be32(v); } while (0)
-#define ioc3_r_emcr() be32_to_cpu(ioc3->emcr)
-#define ioc3_w_emcr(v) do { ioc3->emcr = cpu_to_be32(v); } while (0)
-#define ioc3_r_eisr() be32_to_cpu(ioc3->eisr)
-#define ioc3_w_eisr(v) do { ioc3->eisr = cpu_to_be32(v); } while (0)
-#define ioc3_r_eier() be32_to_cpu(ioc3->eier)
-#define ioc3_w_eier(v) do { ioc3->eier = cpu_to_be32(v); } while (0)
-#define ioc3_r_ercsr() be32_to_cpu(ioc3->ercsr)
-#define ioc3_w_ercsr(v) do { ioc3->ercsr = cpu_to_be32(v); } while (0)
-#define ioc3_r_erbr_h() be32_to_cpu(ioc3->erbr_h)
-#define ioc3_w_erbr_h(v) do { ioc3->erbr_h = cpu_to_be32(v); } while (0)
-#define ioc3_r_erbr_l() be32_to_cpu(ioc3->erbr_l)
-#define ioc3_w_erbr_l(v) do { ioc3->erbr_l = cpu_to_be32(v); } while (0)
-#define ioc3_r_erbar() be32_to_cpu(ioc3->erbar)
-#define ioc3_w_erbar(v) do { ioc3->erbar = cpu_to_be32(v); } while (0)
-#define ioc3_r_ercir() be32_to_cpu(ioc3->ercir)
-#define ioc3_w_ercir(v) do { ioc3->ercir = cpu_to_be32(v); } while (0)
-#define ioc3_r_erpir() be32_to_cpu(ioc3->erpir)
-#define ioc3_w_erpir(v) do { ioc3->erpir = cpu_to_be32(v); } while (0)
-#define ioc3_r_ertr() be32_to_cpu(ioc3->ertr)
-#define ioc3_w_ertr(v) do { ioc3->ertr = cpu_to_be32(v); } while (0)
-#define ioc3_r_etcsr() be32_to_cpu(ioc3->etcsr)
-#define ioc3_w_etcsr(v) do { ioc3->etcsr = cpu_to_be32(v); } while (0)
-#define ioc3_r_ersr() be32_to_cpu(ioc3->ersr)
-#define ioc3_w_ersr(v) do { ioc3->ersr = cpu_to_be32(v); } while (0)
-#define ioc3_r_etcdc() be32_to_cpu(ioc3->etcdc)
-#define ioc3_w_etcdc(v) do { ioc3->etcdc = cpu_to_be32(v); } while (0)
-#define ioc3_r_ebir() be32_to_cpu(ioc3->ebir)
-#define ioc3_w_ebir(v) do { ioc3->ebir = cpu_to_be32(v); } while (0)
-#define ioc3_r_etbr_h() be32_to_cpu(ioc3->etbr_h)
-#define ioc3_w_etbr_h(v) do { ioc3->etbr_h = cpu_to_be32(v); } while (0)
-#define ioc3_r_etbr_l() be32_to_cpu(ioc3->etbr_l)
-#define ioc3_w_etbr_l(v) do { ioc3->etbr_l = cpu_to_be32(v); } while (0)
-#define ioc3_r_etcir() be32_to_cpu(ioc3->etcir)
-#define ioc3_w_etcir(v) do { ioc3->etcir = cpu_to_be32(v); } while (0)
-#define ioc3_r_etpir() be32_to_cpu(ioc3->etpir)
-#define ioc3_w_etpir(v) do { ioc3->etpir = cpu_to_be32(v); } while (0)
-#define ioc3_r_emar_h() be32_to_cpu(ioc3->emar_h)
-#define ioc3_w_emar_h(v) do { ioc3->emar_h = cpu_to_be32(v); } while (0)
-#define ioc3_r_emar_l() be32_to_cpu(ioc3->emar_l)
-#define ioc3_w_emar_l(v) do { ioc3->emar_l = cpu_to_be32(v); } while (0)
-#define ioc3_r_ehar_h() be32_to_cpu(ioc3->ehar_h)
-#define ioc3_w_ehar_h(v) do { ioc3->ehar_h = cpu_to_be32(v); } while (0)
-#define ioc3_r_ehar_l() be32_to_cpu(ioc3->ehar_l)
-#define ioc3_w_ehar_l(v) do { ioc3->ehar_l = cpu_to_be32(v); } while (0)
-#define ioc3_r_micr() be32_to_cpu(ioc3->micr)
-#define ioc3_w_micr(v) do { ioc3->micr = cpu_to_be32(v); } while (0)
-#define ioc3_r_midr_r() be32_to_cpu(ioc3->midr_r)
-#define ioc3_w_midr_r(v) do { ioc3->midr_r = cpu_to_be32(v); } while (0)
-#define ioc3_r_midr_w() be32_to_cpu(ioc3->midr_w)
-#define ioc3_w_midr_w(v) do { ioc3->midr_w = cpu_to_be32(v); } while (0)
-
-static inline u32 mcr_pack(u32 pulse, u32 sample)
-{
- return (pulse << 10) | (sample << 2);
-}
-
-static int nic_wait(struct ioc3 *ioc3)
-{
- u32 mcr;
-
- do {
- mcr = ioc3_r_mcr();
- } while (!(mcr & 2));
-
- return mcr & 1;
-}
-
-static int nic_reset(struct ioc3 *ioc3)
-{
- int presence;
-
- ioc3_w_mcr(mcr_pack(500, 65));
- presence = nic_wait(ioc3);
-
- ioc3_w_mcr(mcr_pack(0, 500));
- nic_wait(ioc3);
-
- return presence;
-}
-
-static inline int nic_read_bit(struct ioc3 *ioc3)
-{
- int result;
-
- ioc3_w_mcr(mcr_pack(6, 13));
- result = nic_wait(ioc3);
- ioc3_w_mcr(mcr_pack(0, 100));
- nic_wait(ioc3);
-
- return result;
-}
-
-static inline void nic_write_bit(struct ioc3 *ioc3, int bit)
-{
- if (bit)
- ioc3_w_mcr(mcr_pack(6, 110));
- else
- ioc3_w_mcr(mcr_pack(80, 30));
-
- nic_wait(ioc3);
-}
-
-/*
- * Read a byte from an iButton device
- */
-static u32 nic_read_byte(struct ioc3 *ioc3)
+static void __ioc3_set_mac_address(struct net_device *dev,
+ struct ioc3_ethregs *regs)
{
- u32 result = 0;
- int i;
-
- for (i = 0; i < 8; i++)
- result = (result >> 1) | (nic_read_bit(ioc3) << 7);
-
- return result;
+ writel((dev->dev_addr[5] << 8) |
+ dev->dev_addr[4],
+ ®s->emar_h);
+ writel((dev->dev_addr[3] << 24) |
+ (dev->dev_addr[2] << 16) |
+ (dev->dev_addr[1] << 8) |
+ dev->dev_addr[0],
+ ®s->emar_l);
}
/*
- * Write a byte to an iButton device
+ * Caller must hold the ioc3_lock ever for MII readers. This is also
+ * used to protect the transmitter side but it's low contention.
*/
-static void nic_write_byte(struct ioc3 *ioc3, int byte)
+static int ioc3_mdio_read(struct net_device *dev, int phy, int reg)
{
- int i, bit;
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3_ethregs *regs = ip->regs;
- for (i = 8; i; i--) {
- bit = byte & 1;
- byte >>= 1;
+ while (readl(®s->micr) & MICR_BUSY)
+ ;
+ writel((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG,
+ ®s->micr);
+ while (readl(®s->micr) & MICR_BUSY)
+ ;
- nic_write_bit(ioc3, bit);
- }
+ return readl(®s->midr_r) & MIDR_DATA_MASK;
}
-static u64 nic_find(struct ioc3 *ioc3, int *last)
+static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data)
{
- int a, b, index, disc;
- u64 address = 0;
-
- nic_reset(ioc3);
- /* Search ROM. */
- nic_write_byte(ioc3, 0xf0);
-
- /* Algorithm from ``Book of iButton Standards''. */
- for (index = 0, disc = 0; index < 64; index++) {
- a = nic_read_bit(ioc3);
- b = nic_read_bit(ioc3);
-
- if (a && b) {
- printk("NIC search failed (not fatal).\n");
- *last = 0;
- return 0;
- }
-
- if (!a && !b) {
- if (index == *last) {
- address |= 1UL << index;
- } else if (index > *last) {
- address &= ~(1UL << index);
- disc = index;
- } else if ((address & (1UL << index)) == 0)
- disc = index;
- nic_write_bit(ioc3, address & (1UL << index));
- continue;
- } else {
- if (a)
- address |= 1UL << index;
- else
- address &= ~(1UL << index);
- nic_write_bit(ioc3, a);
- continue;
- }
- }
-
- *last = disc;
-
- return address;
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3_ethregs *regs = ip->regs;
+
+ while (readl(®s->micr) & MICR_BUSY)
+ ;
+ writel(data, ®s->midr_w);
+ writel((phy << MICR_PHYADDR_SHIFT) | reg, ®s->micr);
+ while (readl(®s->micr) & MICR_BUSY)
+ ;
}
-static int nic_init(struct ioc3 *ioc3)
+static void ioc3_stop(struct ioc3_private *ip)
{
- const char *unknown = "unknown";
- const char *type = unknown;
- u8 crc;
- u8 serial[6];
- int save = 0, i;
-
- while (1) {
- u64 reg;
- reg = nic_find(ioc3, &save);
-
- switch (reg & 0xff) {
- case 0x91:
- type = "DS1981U";
- break;
- default:
- if (save == 0) {
- /* Let the caller try again. */
- return -1;
- }
- continue;
- }
-
- nic_reset(ioc3);
-
- /* Match ROM. */
- nic_write_byte(ioc3, 0x55);
- for (i = 0; i < 8; i++)
- nic_write_byte(ioc3, (reg >> (i << 3)) & 0xff);
-
- reg >>= 8; /* Shift out type. */
- for (i = 0; i < 6; i++) {
- serial[i] = reg & 0xff;
- reg >>= 8;
- }
- crc = reg & 0xff;
- break;
- }
-
- printk("Found %s NIC", type);
- if (type != unknown)
- printk (" registration number %pM, CRC %02x", serial, crc);
- printk(".\n");
+ struct ioc3_ethregs *regs = ip->regs;
- return 0;
+ writel(0, ®s->emcr); /* Shutup */
+ writel(0, ®s->eier); /* Disable interrupts */
+ (void)readl(®s->eier); /* Flush */
}
/*
- * Read the NIC (Number-In-a-Can) device used to store the MAC address on
- * SN0 / SN00 nodeboards and PCI cards.
+ * Given a multicast ethernet address, this routine calculates the
+ * address's bit index in the logical address filter mask
*/
-static void ioc3_get_eaddr_nic(struct ioc3_private *ip)
+static u32 ioc3_hash(const u8 *addr)
{
- struct ioc3 *ioc3 = ip->regs;
- u8 nic[14];
- int tries = 2; /* There may be some problem with the battery? */
- int i;
-
- ioc3_w_gpcr_s(1 << 21);
+ u32 crc, temp = 0;
+ int bits;
- while (tries--) {
- if (!nic_init(ioc3))
- break;
- udelay(500);
- }
+ crc = ether_crc_le(ETH_ALEN, addr);
- if (tries < 0) {
- printk("Failed to read MAC address\n");
- return;
+ crc &= 0x3f; /* bit reverse lowest 6 bits for hash index */
+ for (bits = 6; --bits >= 0; ) {
+ temp <<= 1;
+ temp |= (crc & 0x1);
+ crc >>= 1;
}
- /* Read Memory. */
- nic_write_byte(ioc3, 0xf0);
- nic_write_byte(ioc3, 0x00);
- nic_write_byte(ioc3, 0x00);
-
- for (i = 13; i >= 0; i--)
- nic[i] = nic_read_byte(ioc3);
-
- for (i = 2; i < 8; i++)
- ip->dev->dev_addr[i - 2] = nic[i];
-}
-
-/*
- * Ok, this is hosed by design. It's necessary to know what machine the
- * NIC is in in order to know how to read the NIC address. We also have
- * to know if it's a PCI card or a NIC in on the node board ...
- */
-static void ioc3_get_eaddr(struct ioc3_private *ip)
-{
- ioc3_get_eaddr_nic(ip);
-
- printk("Ethernet address is %pM.\n", ip->dev->dev_addr);
-}
-
-static void __ioc3_set_mac_address(struct net_device *dev)
-{
- struct ioc3_private *ip = netdev_priv(dev);
- struct ioc3 *ioc3 = ip->regs;
-
- ioc3_w_emar_h((dev->dev_addr[5] << 8) | dev->dev_addr[4]);
- ioc3_w_emar_l((dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) |
- (dev->dev_addr[1] << 8) | dev->dev_addr[0]);
+ return temp;
}
-static int ioc3_set_mac_address(struct net_device *dev, void *addr)
+static void ioc3_set_multicast_list(struct net_device *dev)
{
struct ioc3_private *ip = netdev_priv(dev);
- struct sockaddr *sa = addr;
-
- memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
+ struct ioc3_ethregs *regs = ip->regs;
+ struct netdev_hw_addr *ha;
+ u64 ehar = 0;
spin_lock_irq(&ip->ioc3_lock);
- __ioc3_set_mac_address(dev);
- spin_unlock_irq(&ip->ioc3_lock);
-
- return 0;
-}
-
-/*
- * Caller must hold the ioc3_lock ever for MII readers. This is also
- * used to protect the transmitter side but it's low contention.
- */
-static int ioc3_mdio_read(struct net_device *dev, int phy, int reg)
-{
- struct ioc3_private *ip = netdev_priv(dev);
- struct ioc3 *ioc3 = ip->regs;
-
- while (ioc3_r_micr() & MICR_BUSY);
- ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG);
- while (ioc3_r_micr() & MICR_BUSY);
-
- return ioc3_r_midr_r() & MIDR_DATA_MASK;
-}
-
-static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data)
-{
- struct ioc3_private *ip = netdev_priv(dev);
- struct ioc3 *ioc3 = ip->regs;
-
- while (ioc3_r_micr() & MICR_BUSY);
- ioc3_w_midr_w(data);
- ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg);
- while (ioc3_r_micr() & MICR_BUSY);
-}
-
-static int ioc3_mii_init(struct ioc3_private *ip);
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ ip->emcr |= EMCR_PROMISC;
+ writel(ip->emcr, ®s->emcr);
+ (void)readl(®s->emcr);
+ } else {
+ ip->emcr &= ~EMCR_PROMISC;
+ writel(ip->emcr, ®s->emcr); /* Clear promiscuous. */
+ (void)readl(®s->emcr);
-static struct net_device_stats *ioc3_get_stats(struct net_device *dev)
-{
- struct ioc3_private *ip = netdev_priv(dev);
- struct ioc3 *ioc3 = ip->regs;
+ if ((dev->flags & IFF_ALLMULTI) ||
+ (netdev_mc_count(dev) > 64)) {
+ /* Too many for hashing to make sense or we want all
+ * multicast packets anyway, so skip computing all
+ * the hashes and just accept all packets.
+ */
+ ip->ehar_h = 0xffffffff;
+ ip->ehar_l = 0xffffffff;
+ } else {
+ netdev_for_each_mc_addr(ha, dev) {
+ ehar |= (1UL << ioc3_hash(ha->addr));
+ }
+ ip->ehar_h = ehar >> 32;
+ ip->ehar_l = ehar & 0xffffffff;
+ }
+ writel(ip->ehar_h, ®s->ehar_h);
+ writel(ip->ehar_l, ®s->ehar_l);
+ }
- dev->stats.collisions += (ioc3_r_etcdc() & ETCDC_COLLCNT_MASK);
- return &dev->stats;
+ spin_unlock_irq(&ip->ioc3_lock);
}
static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len)
{
struct ethhdr *eh = eth_hdr(skb);
- uint32_t csum, ehsum;
- unsigned int proto;
struct iphdr *ih;
- uint16_t *ew;
- unsigned char *cp;
+ u8 *cp;
+ u16 *ew;
+ u32 csum, ehsum, proto;
/*
* Did hardware handle the checksum at all? The cases we can handle
@@ -568,277 +308,95 @@ static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len)
skb->ip_summed = CHECKSUM_UNNECESSARY;
}
-static inline void ioc3_rx(struct net_device *dev)
-{
- struct ioc3_private *ip = netdev_priv(dev);
- struct sk_buff *skb, *new_skb;
- struct ioc3 *ioc3 = ip->regs;
- int rx_entry, n_entry, len;
- struct ioc3_erxbuf *rxb;
- unsigned long *rxr;
- u32 w0, err;
+#define ETCSR_FD ((17 << ETCSR_IPGR2_SHIFT) | (11 << ETCSR_IPGR1_SHIFT) | 21)
+#define ETCSR_HD ((21 << ETCSR_IPGR2_SHIFT) | (21 << ETCSR_IPGR1_SHIFT) | 21)
- rxr = ip->rxr; /* Ring base */
- rx_entry = ip->rx_ci; /* RX consume index */
- n_entry = ip->rx_pi;
+static void ioc3_setup_duplex(struct ioc3_private *ip)
+{
+ struct ioc3_ethregs *regs = ip->regs;
- skb = ip->rx_skbs[rx_entry];
- rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
- w0 = be32_to_cpu(rxb->w0);
+ if (ip->mii.full_duplex) {
+ writel(ETCSR_FD, ®s->etcsr);
+ ip->emcr |= EMCR_DUPLEX;
+ } else {
+ writel(ETCSR_HD, ®s->etcsr);
+ ip->emcr &= ~EMCR_DUPLEX;
+ }
+ writel(ip->emcr, ®s->emcr);
+ (void)readl(®s->emcr);
+}
- while (w0 & ERXBUF_V) {
- err = be32_to_cpu(rxb->err); /* It's valid ... */
- if (err & ERXBUF_GOODPKT) {
- len = ((w0 >> ERXBUF_BYTECNT_SHIFT) & 0x7ff) - 4;
- skb_trim(skb, len);
- skb->protocol = eth_type_trans(skb, dev);
+static void ioc3_timer(struct timer_list *t)
+{
+ struct ioc3_private *ip = from_timer(ip, t, ioc3_timer);
- new_skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC);
- if (!new_skb) {
- /* Ouch, drop packet and just recycle packet
- to keep the ring filled. */
- dev->stats.rx_dropped++;
- new_skb = skb;
- goto next;
- }
+ /* Print the link status if it has changed */
+ mii_check_media(&ip->mii, 1, 0);
+ ioc3_setup_duplex(ip);
- if (likely(dev->features & NETIF_F_RXCSUM))
- ioc3_tcpudp_checksum(skb,
- w0 & ERXBUF_IPCKSUM_MASK, len);
+ ip->ioc3_timer.expires = jiffies + ((12 * HZ) / 10); /* 1.2s */
+ add_timer(&ip->ioc3_timer);
+}
- netif_rx(skb);
+/* Try to find a PHY. There is no apparent relation between the MII addresses
+ * in the SGI documentation and what we find in reality, so we simply probe
+ * for the PHY. It seems IOC3 PHYs usually live on address 31. One of my
+ * onboard IOC3s has the special oddity that probing doesn't seem to find it
+ * yet the interface seems to work fine, so if probing fails we for now will
+ * simply default to PHY 31 instead of bailing out.
+ */
+static int ioc3_mii_init(struct ioc3_private *ip)
+{
+ int ioc3_phy_workaround = 1;
+ int i, found = 0, res = 0;
+ u16 word;
- ip->rx_skbs[rx_entry] = NULL; /* Poison */
+ for (i = 0; i < 32; i++) {
+ word = ioc3_mdio_read(ip->mii.dev, i, MII_PHYSID1);
- /* Because we reserve afterwards. */
- skb_put(new_skb, (1664 + RX_OFFSET));
- rxb = (struct ioc3_erxbuf *) new_skb->data;
- skb_reserve(new_skb, RX_OFFSET);
+ if (word != 0xffff && word != 0x0000) {
+ found = 1;
+ break; /* Found a PHY */
+ }
+ }
- dev->stats.rx_packets++; /* Statistics */
- dev->stats.rx_bytes += len;
+ if (!found) {
+ if (ioc3_phy_workaround) {
+ i = 31;
} else {
- /* The frame is invalid and the skb never
- reached the network layer so we can just
- recycle it. */
- new_skb = skb;
- dev->stats.rx_errors++;
+ ip->mii.phy_id = -1;
+ res = -ENODEV;
+ goto out;
}
- if (err & ERXBUF_CRCERR) /* Statistics */
- dev->stats.rx_crc_errors++;
- if (err & ERXBUF_FRAMERR)
- dev->stats.rx_frame_errors++;
-next:
- ip->rx_skbs[n_entry] = new_skb;
- rxr[n_entry] = cpu_to_be64(ioc3_map(rxb, 1));
- rxb->w0 = 0; /* Clear valid flag */
- n_entry = (n_entry + 1) & 511; /* Update erpir */
-
- /* Now go on to the next ring entry. */
- rx_entry = (rx_entry + 1) & 511;
- skb = ip->rx_skbs[rx_entry];
- rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
- w0 = be32_to_cpu(rxb->w0);
}
- ioc3_w_erpir((n_entry << 3) | ERPIR_ARM);
- ip->rx_pi = n_entry;
- ip->rx_ci = rx_entry;
+
+ ip->mii.phy_id = i;
+
+out:
+ return res;
}
-static inline void ioc3_tx(struct net_device *dev)
+static void ioc3_mii_start(struct ioc3_private *ip)
{
- struct ioc3_private *ip = netdev_priv(dev);
- unsigned long packets, bytes;
- struct ioc3 *ioc3 = ip->regs;
- int tx_entry, o_entry;
+ ip->ioc3_timer.expires = jiffies + (12 * HZ) / 10; /* 1.2 sec. */
+ add_timer(&ip->ioc3_timer);
+}
+
+static void ioc3_clean_rx_ring(struct ioc3_private *ip)
+{
+ struct ioc3_erxbuf *rxb;
struct sk_buff *skb;
- u32 etcir;
+ int i;
- spin_lock(&ip->ioc3_lock);
- etcir = ioc3_r_etcir();
-
- tx_entry = (etcir >> 7) & 127;
- o_entry = ip->tx_ci;
- packets = 0;
- bytes = 0;
-
- while (o_entry != tx_entry) {
- packets++;
- skb = ip->tx_skbs[o_entry];
- bytes += skb->len;
- dev_consume_skb_irq(skb);
- ip->tx_skbs[o_entry] = NULL;
-
- o_entry = (o_entry + 1) & 127; /* Next */
-
- etcir = ioc3_r_etcir(); /* More pkts sent? */
- tx_entry = (etcir >> 7) & 127;
- }
-
- dev->stats.tx_packets += packets;
- dev->stats.tx_bytes += bytes;
- ip->txqlen -= packets;
-
- if (ip->txqlen < 128)
- netif_wake_queue(dev);
-
- ip->tx_ci = o_entry;
- spin_unlock(&ip->ioc3_lock);
-}
-
-/*
- * Deal with fatal IOC3 errors. This condition might be caused by a hard or
- * software problems, so we should try to recover
- * more gracefully if this ever happens. In theory we might be flooded
- * with such error interrupts if something really goes wrong, so we might
- * also consider to take the interface down.
- */
-static void ioc3_error(struct net_device *dev, u32 eisr)
-{
- struct ioc3_private *ip = netdev_priv(dev);
- unsigned char *iface = dev->name;
-
- spin_lock(&ip->ioc3_lock);
-
- if (eisr & EISR_RXOFLO)
- printk(KERN_ERR "%s: RX overflow.\n", iface);
- if (eisr & EISR_RXBUFOFLO)
- printk(KERN_ERR "%s: RX buffer overflow.\n", iface);
- if (eisr & EISR_RXMEMERR)
- printk(KERN_ERR "%s: RX PCI error.\n", iface);
- if (eisr & EISR_RXPARERR)
- printk(KERN_ERR "%s: RX SSRAM parity error.\n", iface);
- if (eisr & EISR_TXBUFUFLO)
- printk(KERN_ERR "%s: TX buffer underflow.\n", iface);
- if (eisr & EISR_TXMEMERR)
- printk(KERN_ERR "%s: TX PCI error.\n", iface);
-
- ioc3_stop(ip);
- ioc3_init(dev);
- ioc3_mii_init(ip);
-
- netif_wake_queue(dev);
-
- spin_unlock(&ip->ioc3_lock);
-}
-
-/* The interrupt handler does all of the Rx thread work and cleans up
- after the Tx thread. */
-static irqreturn_t ioc3_interrupt(int irq, void *_dev)
-{
- struct net_device *dev = (struct net_device *)_dev;
- struct ioc3_private *ip = netdev_priv(dev);
- struct ioc3 *ioc3 = ip->regs;
- const u32 enabled = EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO |
- EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO |
- EISR_TXEXPLICIT | EISR_TXMEMERR;
- u32 eisr;
-
- eisr = ioc3_r_eisr() & enabled;
-
- ioc3_w_eisr(eisr);
- (void) ioc3_r_eisr(); /* Flush */
-
- if (eisr & (EISR_RXOFLO | EISR_RXBUFOFLO | EISR_RXMEMERR |
- EISR_RXPARERR | EISR_TXBUFUFLO | EISR_TXMEMERR))
- ioc3_error(dev, eisr);
- if (eisr & EISR_RXTIMERINT)
- ioc3_rx(dev);
- if (eisr & EISR_TXEXPLICIT)
- ioc3_tx(dev);
-
- return IRQ_HANDLED;
-}
-
-static inline void ioc3_setup_duplex(struct ioc3_private *ip)
-{
- struct ioc3 *ioc3 = ip->regs;
-
- if (ip->mii.full_duplex) {
- ioc3_w_etcsr(ETCSR_FD);
- ip->emcr |= EMCR_DUPLEX;
- } else {
- ioc3_w_etcsr(ETCSR_HD);
- ip->emcr &= ~EMCR_DUPLEX;
- }
- ioc3_w_emcr(ip->emcr);
-}
-
-static void ioc3_timer(struct timer_list *t)
-{
- struct ioc3_private *ip = from_timer(ip, t, ioc3_timer);
-
- /* Print the link status if it has changed */
- mii_check_media(&ip->mii, 1, 0);
- ioc3_setup_duplex(ip);
-
- ip->ioc3_timer.expires = jiffies + ((12 * HZ)/10); /* 1.2s */
- add_timer(&ip->ioc3_timer);
-}
-
-/*
- * Try to find a PHY. There is no apparent relation between the MII addresses
- * in the SGI documentation and what we find in reality, so we simply probe
- * for the PHY. It seems IOC3 PHYs usually live on address 31. One of my
- * onboard IOC3s has the special oddity that probing doesn't seem to find it
- * yet the interface seems to work fine, so if probing fails we for now will
- * simply default to PHY 31 instead of bailing out.
- */
-static int ioc3_mii_init(struct ioc3_private *ip)
-{
- int i, found = 0, res = 0;
- int ioc3_phy_workaround = 1;
- u16 word;
-
- for (i = 0; i < 32; i++) {
- word = ioc3_mdio_read(ip->dev, i, MII_PHYSID1);
-
- if (word != 0xffff && word != 0x0000) {
- found = 1;
- break; /* Found a PHY */
- }
- }
-
- if (!found) {
- if (ioc3_phy_workaround)
- i = 31;
- else {
- ip->mii.phy_id = -1;
- res = -ENODEV;
- goto out;
- }
- }
-
- ip->mii.phy_id = i;
-
-out:
- return res;
-}
-
-static void ioc3_mii_start(struct ioc3_private *ip)
-{
- ip->ioc3_timer.expires = jiffies + (12 * HZ)/10; /* 1.2 sec. */
- add_timer(&ip->ioc3_timer);
-}
-
-static inline void ioc3_clean_rx_ring(struct ioc3_private *ip)
-{
- struct sk_buff *skb;
- int i;
-
- for (i = ip->rx_ci; i & 15; i++) {
- ip->rx_skbs[ip->rx_pi] = ip->rx_skbs[ip->rx_ci];
- ip->rxr[ip->rx_pi++] = ip->rxr[ip->rx_ci++];
- }
- ip->rx_pi &= 511;
- ip->rx_ci &= 511;
-
- for (i = ip->rx_ci; i != ip->rx_pi; i = (i+1) & 511) {
- struct ioc3_erxbuf *rxb;
+ for (i = 0; i < RX_BUFFS; i++) {
skb = ip->rx_skbs[i];
- rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET);
- rxb->w0 = 0;
+ if (skb) {
+ rxb = (struct ioc3_erxbuf *)(skb->data - RX_OFFSET);
+ rxb->w0 = 0;
+ }
}
+ ip->rx_ci = 0;
+ ip->rx_pi = RX_BUFFS - 16;
}
static inline void ioc3_clean_tx_ring(struct ioc3_private *ip)
@@ -846,7 +404,7 @@ static inline void ioc3_clean_tx_ring(struct ioc3_private *ip)
struct sk_buff *skb;
int i;
- for (i=0; i < 128; i++) {
+ for (i = 0; i < TX_BUFFS; i++) {
skb = ip->tx_skbs[i];
if (skb) {
ip->tx_skbs[i] = NULL;
@@ -861,7 +419,7 @@ static inline void ioc3_clean_tx_ring(struct ioc3_private *ip)
static void ioc3_free_rings(struct ioc3_private *ip)
{
struct sk_buff *skb;
- int rx_entry, n_entry;
+ int i;
if (ip->txr) {
ioc3_clean_tx_ring(ip);
@@ -870,15 +428,10 @@ static void ioc3_free_rings(struct ioc3_private *ip)
}
if (ip->rxr) {
- n_entry = ip->rx_ci;
- rx_entry = ip->rx_pi;
-
- while (n_entry != rx_entry) {
- skb = ip->rx_skbs[n_entry];
+ for (i = 0; i < RX_BUFFS; i++) {
+ skb = ip->rx_skbs[i];
if (skb)
dev_kfree_skb_any(skb);
-
- n_entry = (n_entry + 1) & 511;
}
free_page((unsigned long)ip->rxr);
ip->rxr = NULL;
@@ -897,15 +450,16 @@ static void ioc3_alloc_rings(struct net_device *dev)
ip->rxr = (unsigned long *) get_zeroed_page(GFP_ATOMIC);
rxr = ip->rxr;
if (!rxr)
- printk("ioc3_alloc_rings(): get_zeroed_page() failed!\n");
+ printk(KERN_ERR "ioc3_alloc_rings(): get_zeroed_page() failed!\n");
- /* Now the rx buffers. The RX ring may be larger but
- we only allocate 16 buffers for now. Need to tune
- this for performance and memory later. */
+ /* Now the rx buffers. The RX ring may be larger but we
+ * only allocate RX_BUFFS buffers for now. Need to tune
+ * this for performance and memory later.
+ */
for (i = 0; i < RX_BUFFS; i++) {
struct sk_buff *skb;
- skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC);
+ skb = ioc3_alloc_skb(dev);
if (!skb) {
show_free_areas(0, NULL);
continue;
@@ -914,29 +468,26 @@ static void ioc3_alloc_rings(struct net_device *dev)
ip->rx_skbs[i] = skb;
/* Because we reserve afterwards. */
- skb_put(skb, (1664 + RX_OFFSET));
+ skb_put(skb, (RX_BUF_SIZE + RX_OFFSET));
rxb = (struct ioc3_erxbuf *) skb->data;
- rxr[i] = cpu_to_be64(ioc3_map(rxb, 1));
+ rxr[i] = cpu_to_be64(ioc3_map(rxb, PCI64_ATTR_BAR));
skb_reserve(skb, RX_OFFSET);
}
- ip->rx_ci = 0;
- ip->rx_pi = RX_BUFFS;
}
if (ip->txr == NULL) {
/* Allocate and initialize tx rings. 16kb = 128 bufs. */
- ip->txr = (struct ioc3_etxd *)__get_free_pages(GFP_KERNEL, 2);
+ ip->txr = (struct ioc3_etxd *)__get_free_pages((GFP_ATOMIC |
+ __GFP_ZERO), 2);
if (!ip->txr)
- printk("ioc3_alloc_rings(): __get_free_pages() failed!\n");
- ip->tx_pi = 0;
- ip->tx_ci = 0;
+ printk(KERN_ERR "ioc3_alloc_rings(): __get_free_pages() failed!\n");
}
}
static void ioc3_init_rings(struct net_device *dev)
{
struct ioc3_private *ip = netdev_priv(dev);
- struct ioc3 *ioc3 = ip->regs;
+ struct ioc3_ethregs *regs = ip->regs;
unsigned long ring;
ioc3_free_rings(ip);
@@ -946,109 +497,109 @@ static void ioc3_init_rings(struct net_device *dev)
ioc3_clean_tx_ring(ip);
/* Now the rx ring base, consume & produce registers. */
- ring = ioc3_map(ip->rxr, 0);
- ioc3_w_erbr_h(ring >> 32);
- ioc3_w_erbr_l(ring & 0xffffffff);
- ioc3_w_ercir(ip->rx_ci << 3);
- ioc3_w_erpir((ip->rx_pi << 3) | ERPIR_ARM);
-
- ring = ioc3_map(ip->txr, 0);
-
- ip->txqlen = 0; /* nothing queued */
+ ring = ioc3_map(ip->rxr, PCI64_ATTR_VIRTUAL | PCI64_ATTR_PREC);
+ writel(ring >> 32, ®s->erbr_h);
+ writel(ring & 0xffffffff, ®s->erbr_l);
+ writel(ip->rx_ci << 3, ®s->ercir);
+ writel((ip->rx_pi << 3) | ERPIR_ARM, ®s->erpir);
/* Now the tx ring base, consume & produce registers. */
- ioc3_w_etbr_h(ring >> 32);
- ioc3_w_etbr_l(ring & 0xffffffff);
- ioc3_w_etpir(ip->tx_pi << 7);
- ioc3_w_etcir(ip->tx_ci << 7);
- (void) ioc3_r_etcir(); /* Flush */
+ ring = ioc3_map(ip->txr, PCI64_ATTR_VIRTUAL | PCI64_ATTR_PREC);
+ ip->txbfree = TX_BUFFS; /* nothing queued */
+ writel(ring >> 32, ®s->etbr_h);
+ writel(ring & 0xffffffff, ®s->etbr_l);
+ writel(ip->tx_pi << 7, ®s->etpir);
+ writel(ip->tx_ci << 7, ®s->etcir);
+ (void)readl(®s->etcir); /* Flush */
}
-static inline void ioc3_ssram_disc(struct ioc3_private *ip)
+static void ioc3_ssram_disc(struct ioc3_private *ip)
{
- struct ioc3 *ioc3 = ip->regs;
- volatile u32 *ssram0 = &ioc3->ssram[0x0000];
- volatile u32 *ssram1 = &ioc3->ssram[0x4000];
- unsigned int pattern = 0x5555;
+ struct ioc3_ethregs *regs = ip->regs;
+ u32 *ssram0 = &ip->ssram[0x0000];
+ u32 *ssram1 = &ip->ssram[0x4000];
+ u32 *emcr_p = ®s->emcr;
+ u32 pattern0, pattern1;
+
+ pattern0 = 0x5555;
+ pattern1 = ~pattern0 & IOC3_SSRAM_DM;
/* Assume the larger size SSRAM and enable parity checking */
- ioc3_w_emcr(ioc3_r_emcr() | (EMCR_BUFSIZ | EMCR_RAMPAR));
+ writel(readl(emcr_p) | EMCR_BUFSIZ | EMCR_RAMPAR, emcr_p);
+ (void)readl(emcr_p);
- *ssram0 = pattern;
- *ssram1 = ~pattern & IOC3_SSRAM_DM;
+ writel(pattern0, ssram0);
+ writel(pattern1, ssram1);
- if ((*ssram0 & IOC3_SSRAM_DM) != pattern ||
- (*ssram1 & IOC3_SSRAM_DM) != (~pattern & IOC3_SSRAM_DM)) {
+ if (((readl(ssram0) & IOC3_SSRAM_DM) != pattern0) ||
+ ((readl(ssram1) & IOC3_SSRAM_DM) != pattern1)) {
/* set ssram size to 64 KB */
- ip->emcr = EMCR_RAMPAR;
- ioc3_w_emcr(ioc3_r_emcr() & ~EMCR_BUFSIZ);
- } else
- ip->emcr = EMCR_BUFSIZ | EMCR_RAMPAR;
+ ip->emcr |= EMCR_RAMPAR;
+ writel(readl(emcr_p) & ~EMCR_BUFSIZ, emcr_p);
+ (void)readl(emcr_p);
+ } else {
+ ip->emcr |= EMCR_RAMPAR | EMCR_BUFSIZ;
+ }
}
static void ioc3_init(struct net_device *dev)
{
struct ioc3_private *ip = netdev_priv(dev);
- struct ioc3 *ioc3 = ip->regs;
+ struct ioc3_ethregs *regs = ip->regs;
del_timer_sync(&ip->ioc3_timer); /* Kill if running */
- ioc3_w_emcr(EMCR_RST); /* Reset */
- (void) ioc3_r_emcr(); /* Flush WB */
- udelay(4); /* Give it time ... */
- ioc3_w_emcr(0);
- (void) ioc3_r_emcr();
+ writel(EMCR_RST, ®s->emcr); /* Reset */
+ (void)readl(®s->emcr); /* Flush WB */
+ udelay(4); /* Give it time... */
+ writel(0, ®s->emcr);
+ (void)readl(®s->emcr);
/* Misc registers */
#ifdef CONFIG_SGI_IP27
- ioc3_w_erbar(PCI64_ATTR_BAR >> 32); /* Barrier on last store */
+ /* Barrier on last store */
+ writel(readl(®s->erbar) |
+ (ERBAR_BARRIER_BIT << ERBAR_RXBARR_SHIFT), ®s->erbar);
#else
- ioc3_w_erbar(0); /* Let PCI API get it right */
+ /* Let PCI API get it right */
+ writel(0, ®s->erbar);
#endif
- (void) ioc3_r_etcdc(); /* Clear on read */
- ioc3_w_ercsr(15); /* RX low watermark */
- ioc3_w_ertr(0); /* Interrupt immediately */
- __ioc3_set_mac_address(dev);
- ioc3_w_ehar_h(ip->ehar_h);
- ioc3_w_ehar_l(ip->ehar_l);
- ioc3_w_ersr(42); /* XXX should be random */
+ readl(®s->etcdc); /* Clear on read */
+ writel(15, ®s->ercsr); /* RX low watermark */
+ writel(1, ®s->ertr); /* Interrupt immediately */
+ __ioc3_set_mac_address(dev, regs);
+ writel(ip->ehar_h, ®s->ehar_h);
+ writel(ip->ehar_l, ®s->ehar_l);
+ writel(42, ®s->ersr); /* XXX Should be random */
ioc3_init_rings(dev);
- ip->emcr |= ((RX_OFFSET / 2) << EMCR_RXOFF_SHIFT) | EMCR_TXDMAEN |
- EMCR_TXEN | EMCR_RXDMAEN | EMCR_RXEN | EMCR_PADEN;
- ioc3_w_emcr(ip->emcr);
- ioc3_w_eier(EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO |
- EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO |
- EISR_TXEXPLICIT | EISR_TXMEMERR);
- (void) ioc3_r_eier();
-}
-
-static inline void ioc3_stop(struct ioc3_private *ip)
-{
- struct ioc3 *ioc3 = ip->regs;
-
- ioc3_w_emcr(0); /* Shutup */
- ioc3_w_eier(0); /* Disable interrupts */
- (void) ioc3_r_eier(); /* Flush */
+ ip->emcr |= ((RX_OFFSET / 2) << EMCR_RXOFF_SHIFT) |
+ EMCR_TXDMAEN | EMCR_TXEN |
+ EMCR_RXDMAEN | EMCR_RXEN |
+ EMCR_PADEN;
+ writel(ip->emcr, ®s->emcr);
+ readl(®s->emcr);
+ writel(EISR_RXTIMERINT | EISR_RXTHRESHINT |
+ EISR_RXOFLO | EISR_RXBUFOFLO |
+ EISR_RXMEMERR | EISR_RXPARERR |
+ EISR_TXEXDEF |
+ EISR_TXBUFUFLO |
+ EISR_TXMEMERR, ®s->eier);
+ readl(®s->eier);
}
static int ioc3_open(struct net_device *dev)
{
struct ioc3_private *ip = netdev_priv(dev);
- if (request_irq(dev->irq, ioc3_interrupt, IRQF_SHARED, ioc3_str, dev)) {
- printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq);
-
- return -EAGAIN;
- }
-
ip->ehar_h = 0;
ip->ehar_l = 0;
ioc3_init(dev);
+ ioc3_mii_init(ip);
ioc3_mii_start(ip);
-
netif_start_queue(dev);
+
return 0;
}
@@ -1061,444 +612,152 @@ static int ioc3_close(struct net_device *dev)
netif_stop_queue(dev);
ioc3_stop(ip);
- free_irq(dev->irq, dev);
+ ioc3_free_rings(ip);
ioc3_free_rings(ip);
return 0;
}
-/*
- * MENET cards have four IOC3 chips, which are attached to two sets of
- * PCI slot resources each: the primary connections are on slots
- * 0..3 and the secondaries are on 4..7
- *
- * All four ethernets are brought out to connectors; six serial ports
- * (a pair from each of the first three IOC3s) are brought out to
- * MiniDINs; all other subdevices are left swinging in the wind, leave
- * them disabled.
- */
-
-static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int slot)
+static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct pci_dev *dev = pci_get_slot(pdev->bus, PCI_DEVFN(slot, 0));
- int ret = 0;
-
- if (dev) {
- if (dev->vendor == PCI_VENDOR_ID_SGI &&
- dev->device == PCI_DEVICE_ID_SGI_IOC3)
- ret = 1;
- pci_dev_put(dev);
- }
-
- return ret;
-}
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3_etxd *desc;
+ unsigned long data;
+ u32 len, w0 = 0;
+ int produce;
-static int ioc3_is_menet(struct pci_dev *pdev)
-{
- return pdev->bus->parent == NULL &&
- ioc3_adjacent_is_ioc3(pdev, 0) &&
- ioc3_adjacent_is_ioc3(pdev, 1) &&
- ioc3_adjacent_is_ioc3(pdev, 2);
-}
+ /* IOC3 has a fairly simple minded checksumming hardware which simply
+ * adds up the 1's complement checksum for the entire packet and
+ * inserts it at an offset which can be specified in the descriptor
+ * into the transmit packet. This means we have to compensate for the
+ * MAC header which should not be summed and the TCP/UDP pseudo headers
+ * manually.
+ */
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ struct iphdr *ih = ip_hdr(skb);
+ u32 proto = ntohs(ih->protocol);
+ u32 csoff, csum, ehsum;
+ u16 *eh;
-#ifdef CONFIG_SERIAL_8250
-/*
- * Note about serial ports and consoles:
- * For console output, everyone uses the IOC3 UARTA (offset 0x178)
- * connected to the master node (look in ip27_setup_console() and
- * ip27prom_console_write()).
- *
- * For serial (/dev/ttyS0 etc), we can not have hardcoded serial port
- * addresses on a partitioned machine. Since we currently use the ioc3
- * serial ports, we use dynamic serial port discovery that the serial.c
- * driver uses for pci/pnp ports (there is an entry for the SGI ioc3
- * boards in pci_boards[]). Unfortunately, UARTA's pio address is greater
- * than UARTB's, although UARTA on o200s has traditionally been known as
- * port 0. So, we just use one serial port from each ioc3 (since the
- * serial driver adds addresses to get to higher ports).
- *
- * The first one to do a register_console becomes the preferred console
- * (if there is no kernel command line console= directive). /dev/console
- * (ie 5, 1) is then "aliased" into the device number returned by the
- * "device" routine referred to in this console structure
- * (ip27prom_console_dev).
- *
- * Also look in ip27-pci.c:pci_fixup_ioc3() for some comments on working
- * around ioc3 oddities in this respect.
- *
- * The IOC3 serials use a 22MHz clock rate with an additional divider which
- * can be programmed in the SCR register if the DLAB bit is set.
- *
- * Register to interrupt zero because we share the interrupt with
- * the serial driver which we don't properly support yet.
- *
- * Can't use UPF_IOREMAP as the whole of IOC3 resources have already been
- * registered.
- */
-static void ioc3_8250_register(struct ioc3_uartregs __iomem *uart)
-{
-#define COSMISC_CONSTANT 6
-
- struct uart_8250_port port = {
- .port = {
- .irq = 0,
- .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = (22000000 << 1) / COSMISC_CONSTANT,
-
- .membase = (unsigned char __iomem *) uart,
- .mapbase = (unsigned long) uart,
- }
- };
- unsigned char lcr;
-
- lcr = uart->iu_lcr;
- uart->iu_lcr = lcr | UART_LCR_DLAB;
- uart->iu_scr = COSMISC_CONSTANT,
- uart->iu_lcr = lcr;
- uart->iu_lcr;
- serial8250_register_8250_port(&port);
-}
+ /* The MAC header. skb->mac seems the logical approach
+ * to find the MAC header. Except if it's a NULL pointer...
+ */
+ eh = (u16 *)skb->data;
-static void ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
-{
- /*
- * We need to recognice and treat the fourth MENET serial as it
- * does not have an SuperIO chip attached to it, therefore attempting
- * to access it will result in bus errors. We call something an
- * MENET if PCI slot 0, 1, 2 and 3 of a master PCI bus all have an IOC3
- * in it. This is paranoid but we want to avoid blowing up on a
- * showhorn PCI box that happens to have 4 IOC3 cards in it so it's
- * not paranoid enough ...
- */
- if (ioc3_is_menet(pdev) && PCI_SLOT(pdev->devfn) == 3)
- return;
+ /* Sum up dest addr, src addr and protocol */
+ ehsum = eh[0] + eh[1] + eh[2] + eh[3] + eh[4] + eh[5] + eh[6];
- /*
- * Switch IOC3 to PIO mode. It probably already was but let's be
- * paranoid
- */
- ioc3->gpcr_s = GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL;
- ioc3->gpcr_s;
- ioc3->gppr_6 = 0;
- ioc3->gppr_6;
- ioc3->gppr_7 = 0;
- ioc3->gppr_7;
- ioc3->sscr_a = ioc3->sscr_a & ~SSCR_DMA_EN;
- ioc3->sscr_a;
- ioc3->sscr_b = ioc3->sscr_b & ~SSCR_DMA_EN;
- ioc3->sscr_b;
- /* Disable all SA/B interrupts except for SA/B_INT in SIO_IEC. */
- ioc3->sio_iec &= ~ (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL |
- SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER |
- SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS |
- SIO_IR_SA_TX_EXPLICIT | SIO_IR_SA_MEMERR);
- ioc3->sio_iec |= SIO_IR_SA_INT;
- ioc3->sscr_a = 0;
- ioc3->sio_iec &= ~ (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL |
- SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER |
- SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS |
- SIO_IR_SB_TX_EXPLICIT | SIO_IR_SB_MEMERR);
- ioc3->sio_iec |= SIO_IR_SB_INT;
- ioc3->sscr_b = 0;
-
- ioc3_8250_register(&ioc3->sregs.uarta);
- ioc3_8250_register(&ioc3->sregs.uartb);
-}
-#endif
+ /* Skip IP header; it's sum is always zero and was already
+ * filled in by ip_output.c
+ */
+ csum = csum_tcpudp_nofold(ih->saddr, ih->daddr,
+ ih->tot_len - (ih->ihl << 2),
+ proto, csum_fold(ehsum));
-static const struct net_device_ops ioc3_netdev_ops = {
- .ndo_open = ioc3_open,
- .ndo_stop = ioc3_close,
- .ndo_start_xmit = ioc3_start_xmit,
- .ndo_tx_timeout = ioc3_timeout,
- .ndo_get_stats = ioc3_get_stats,
- .ndo_set_rx_mode = ioc3_set_multicast_list,
- .ndo_do_ioctl = ioc3_ioctl,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = ioc3_set_mac_address,
-};
+ csum = (csum & 0xffff) + (csum >> 16); /* Fold again */
+ csum = (csum & 0xffff) + (csum >> 16);
-static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- unsigned int sw_physid1, sw_physid2;
- struct net_device *dev = NULL;
- struct ioc3_private *ip;
- struct ioc3 *ioc3;
- unsigned long ioc3_base, ioc3_size;
- u32 vendor, model, rev;
- int err, pci_using_dac;
-
- /* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
- if (!err) {
- pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
- if (err < 0) {
- printk(KERN_ERR "%s: Unable to obtain 64 bit DMA "
- "for consistent allocations\n", pci_name(pdev));
- goto out;
+ csoff = ETH_HLEN + (ih->ihl << 2);
+ if (proto == IPPROTO_UDP) {
+ csoff += offsetof(struct udphdr, check);
+ udp_hdr(skb)->check = csum;
}
- } else {
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err) {
- printk(KERN_ERR "%s: No usable DMA configuration, "
- "aborting.\n", pci_name(pdev));
- goto out;
+ if (proto == IPPROTO_TCP) {
+ csoff += offsetof(struct tcphdr, check);
+ tcp_hdr(skb)->check = csum;
}
- pci_using_dac = 0;
+
+ w0 = ETXD_DOCHECKSUM | (csoff << ETXD_CHKOFF_SHIFT);
}
- if (pci_enable_device(pdev))
- return -ENODEV;
+ spin_lock_irq(&ip->ioc3_lock);
- dev = alloc_etherdev(sizeof(struct ioc3_private));
- if (!dev) {
- err = -ENOMEM;
- goto out_disable;
+ if (ip->txbfree <= 0) {
+ netif_stop_queue(dev);
+ spin_unlock_irq(&ip->ioc3_lock);
+ printk(KERN_ERR "%s: BUG! Tx Ring full when queue awake!\n",
+ dev->name);
+ return NETDEV_TX_BUSY;
}
- if (pci_using_dac)
- dev->features |= NETIF_F_HIGHDMA;
+ data = (unsigned long)skb->data;
+ len = skb->len;
- err = pci_request_regions(pdev, "ioc3");
- if (err)
- goto out_free;
+ produce = ip->tx_pi;
+ desc = &ip->txr[produce];
- SET_NETDEV_DEV(dev, &pdev->dev);
+ if (len <= 104) {
+ /* Short packet, let's copy it directly into the ring. */
+ skb_copy_from_linear_data(skb, desc->data, skb->len);
+ if (len < ETH_ZLEN) {
+ /* Very short packet, pad with zeros at the end. */
+ memset(desc->data + len, 0, ETH_ZLEN - len);
+ len = ETH_ZLEN;
+ }
+ desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_D0V | w0);
+ desc->bufcnt = cpu_to_be32(len);
+ } else if ((data ^ (data + len - 1)) & 0x4000) {
+ unsigned long b2 = (data | 0x3fffUL) + 1UL;
+ unsigned long s1 = b2 - data;
+ unsigned long s2 = data + len - b2;
- ip = netdev_priv(dev);
- ip->dev = dev;
-
- dev->irq = pdev->irq;
-
- ioc3_base = pci_resource_start(pdev, 0);
- ioc3_size = pci_resource_len(pdev, 0);
- ioc3 = (struct ioc3 *) ioremap(ioc3_base, ioc3_size);
- if (!ioc3) {
- printk(KERN_CRIT "ioc3eth(%s): ioremap failed, goodbye.\n",
- pci_name(pdev));
- err = -ENOMEM;
- goto out_res;
+ desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE |
+ ETXD_B1V | ETXD_B2V | w0);
+ desc->bufcnt = cpu_to_be32((s1 << ETXD_B1CNT_SHIFT) |
+ (s2 << ETXD_B2CNT_SHIFT));
+ desc->p1 = cpu_to_be64(ioc3_map(skb->data,
+ PCI64_ATTR_PREF));
+ desc->p2 = cpu_to_be64(ioc3_map((void *)b2,
+ PCI64_ATTR_PREF));
+ } else {
+ /* Normal sized packet that doesn't cross a page boundary. */
+ desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_B1V | w0);
+ desc->bufcnt = cpu_to_be32(len << ETXD_B1CNT_SHIFT);
+ desc->p1 = cpu_to_be64(ioc3_map(skb->data,
+ PCI64_ATTR_PREF));
}
- ip->regs = ioc3;
-#ifdef CONFIG_SERIAL_8250
- ioc3_serial_probe(pdev, ioc3);
-#endif
+ mb(); /* make sure all descriptor changes are visible */
- spin_lock_init(&ip->ioc3_lock);
- timer_setup(&ip->ioc3_timer, ioc3_timer, 0);
+ ip->tx_skbs[produce] = skb; /* Remember skb */
+ produce = (produce + 1) & TX_MASK;
+ ip->tx_pi = produce;
+ writel(produce << 7, &ip->regs->etpir); /* Fire! */
- ioc3_stop(ip);
- ioc3_init(dev);
-
- ip->pdev = pdev;
-
- ip->mii.phy_id_mask = 0x1f;
- ip->mii.reg_num_mask = 0x1f;
- ip->mii.dev = dev;
- ip->mii.mdio_read = ioc3_mdio_read;
- ip->mii.mdio_write = ioc3_mdio_write;
-
- ioc3_mii_init(ip);
-
- if (ip->mii.phy_id == -1) {
- printk(KERN_CRIT "ioc3-eth(%s): Didn't find a PHY, goodbye.\n",
- pci_name(pdev));
- err = -ENODEV;
- goto out_stop;
- }
-
- ioc3_mii_start(ip);
- ioc3_ssram_disc(ip);
- ioc3_get_eaddr(ip);
-
- /* The IOC3-specific entries in the device structure. */
- dev->watchdog_timeo = 5 * HZ;
- dev->netdev_ops = &ioc3_netdev_ops;
- dev->ethtool_ops = &ioc3_ethtool_ops;
- dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
- dev->features = NETIF_F_IP_CSUM;
-
- sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
- sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2);
-
- err = register_netdev(dev);
- if (err)
- goto out_stop;
-
- mii_check_media(&ip->mii, 1, 1);
- ioc3_setup_duplex(ip);
-
- vendor = (sw_physid1 << 12) | (sw_physid2 >> 4);
- model = (sw_physid2 >> 4) & 0x3f;
- rev = sw_physid2 & 0xf;
- printk(KERN_INFO "%s: Using PHY %d, vendor 0x%x, model %d, "
- "rev %d.\n", dev->name, ip->mii.phy_id, vendor, model, rev);
- printk(KERN_INFO "%s: IOC3 SSRAM has %d kbyte.\n", dev->name,
- ip->emcr & EMCR_BUFSIZ ? 128 : 64);
+ ip->txbfree--;
+ if (ip->txbfree == 0)
+ netif_stop_queue(dev);
- return 0;
+ spin_unlock_irq(&ip->ioc3_lock);
-out_stop:
- ioc3_stop(ip);
- del_timer_sync(&ip->ioc3_timer);
- ioc3_free_rings(ip);
-out_res:
- pci_release_regions(pdev);
-out_free:
- free_netdev(dev);
-out_disable:
- /*
- * We should call pci_disable_device(pdev); here if the IOC3 wasn't
- * such a weird device ...
- */
-out:
- return err;
+ return NETDEV_TX_OK;
}
-static void ioc3_remove_one(struct pci_dev *pdev)
+static int ioc3_set_mac_address(struct net_device *dev, void *addr)
{
- struct net_device *dev = pci_get_drvdata(pdev);
struct ioc3_private *ip = netdev_priv(dev);
- struct ioc3 *ioc3 = ip->regs;
-
- unregister_netdev(dev);
- del_timer_sync(&ip->ioc3_timer);
+ struct ioc3_ethregs *regs = ip->regs;
+ struct sockaddr *sa = addr;
- iounmap(ioc3);
- pci_release_regions(pdev);
- free_netdev(dev);
- /*
- * We should call pci_disable_device(pdev); here if the IOC3 wasn't
- * such a weird device ...
- */
-}
+ memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
-static const struct pci_device_id ioc3_pci_tbl[] = {
- { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID },
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, ioc3_pci_tbl);
+ spin_lock_irq(&ip->ioc3_lock);
+ __ioc3_set_mac_address(dev, regs);
+ spin_unlock_irq(&ip->ioc3_lock);
-static struct pci_driver ioc3_driver = {
- .name = "ioc3-eth",
- .id_table = ioc3_pci_tbl,
- .probe = ioc3_probe,
- .remove = ioc3_remove_one,
-};
+ return 0;
+}
-static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
- unsigned long data;
struct ioc3_private *ip = netdev_priv(dev);
- struct ioc3 *ioc3 = ip->regs;
- unsigned int len;
- struct ioc3_etxd *desc;
- uint32_t w0 = 0;
- int produce;
-
- /*
- * IOC3 has a fairly simple minded checksumming hardware which simply
- * adds up the 1's complement checksum for the entire packet and
- * inserts it at an offset which can be specified in the descriptor
- * into the transmit packet. This means we have to compensate for the
- * MAC header which should not be summed and the TCP/UDP pseudo headers
- * manually.
- */
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- const struct iphdr *ih = ip_hdr(skb);
- const int proto = ntohs(ih->protocol);
- unsigned int csoff;
- uint32_t csum, ehsum;
- uint16_t *eh;
-
- /* The MAC header. skb->mac seem the logic approach
- to find the MAC header - except it's a NULL pointer ... */
- eh = (uint16_t *) skb->data;
-
- /* Sum up dest addr, src addr and protocol */
- ehsum = eh[0] + eh[1] + eh[2] + eh[3] + eh[4] + eh[5] + eh[6];
-
- /* Fold ehsum. can't use csum_fold which negates also ... */
- ehsum = (ehsum & 0xffff) + (ehsum >> 16);
- ehsum = (ehsum & 0xffff) + (ehsum >> 16);
-
- /* Skip IP header; it's sum is always zero and was
- already filled in by ip_output.c */
- csum = csum_tcpudp_nofold(ih->saddr, ih->daddr,
- ih->tot_len - (ih->ihl << 2),
- proto, 0xffff ^ ehsum);
-
- csum = (csum & 0xffff) + (csum >> 16); /* Fold again */
- csum = (csum & 0xffff) + (csum >> 16);
-
- csoff = ETH_HLEN + (ih->ihl << 2);
- if (proto == IPPROTO_UDP) {
- csoff += offsetof(struct udphdr, check);
- udp_hdr(skb)->check = csum;
- }
- if (proto == IPPROTO_TCP) {
- csoff += offsetof(struct tcphdr, check);
- tcp_hdr(skb)->check = csum;
- }
-
- w0 = ETXD_DOCHECKSUM | (csoff << ETXD_CHKOFF_SHIFT);
- }
+ int rc;
spin_lock_irq(&ip->ioc3_lock);
-
- data = (unsigned long) skb->data;
- len = skb->len;
-
- produce = ip->tx_pi;
- desc = &ip->txr[produce];
-
- if (len <= 104) {
- /* Short packet, let's copy it directly into the ring. */
- skb_copy_from_linear_data(skb, desc->data, skb->len);
- if (len < ETH_ZLEN) {
- /* Very short packet, pad with zeros at the end. */
- memset(desc->data + len, 0, ETH_ZLEN - len);
- len = ETH_ZLEN;
- }
- desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_D0V | w0);
- desc->bufcnt = cpu_to_be32(len);
- } else if ((data ^ (data + len - 1)) & 0x4000) {
- unsigned long b2 = (data | 0x3fffUL) + 1UL;
- unsigned long s1 = b2 - data;
- unsigned long s2 = data + len - b2;
-
- desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE |
- ETXD_B1V | ETXD_B2V | w0);
- desc->bufcnt = cpu_to_be32((s1 << ETXD_B1CNT_SHIFT) |
- (s2 << ETXD_B2CNT_SHIFT));
- desc->p1 = cpu_to_be64(ioc3_map(skb->data, 1));
- desc->p2 = cpu_to_be64(ioc3_map((void *) b2, 1));
- } else {
- /* Normal sized packet that doesn't cross a page boundary. */
- desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_B1V | w0);
- desc->bufcnt = cpu_to_be32(len << ETXD_B1CNT_SHIFT);
- desc->p1 = cpu_to_be64(ioc3_map(skb->data, 1));
- }
-
- BARRIER();
-
- ip->tx_skbs[produce] = skb; /* Remember skb */
- produce = (produce + 1) & 127;
- ip->tx_pi = produce;
- ioc3_w_etpir(produce << 7); /* Fire ... */
-
- ip->txqlen++;
-
- if (ip->txqlen >= 127)
- netif_stop_queue(dev);
-
+ rc = generic_mii_ioctl(&ip->mii, if_mii(rq), cmd, NULL);
spin_unlock_irq(&ip->ioc3_lock);
- return NETDEV_TX_OK;
+ return rc;
}
static void ioc3_timeout(struct net_device *dev)
@@ -1507,49 +766,42 @@ static void ioc3_timeout(struct net_device *dev)
printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
- spin_lock_irq(&ip->ioc3_lock);
-
ioc3_stop(ip);
ioc3_init(dev);
ioc3_mii_init(ip);
ioc3_mii_start(ip);
- spin_unlock_irq(&ip->ioc3_lock);
-
netif_wake_queue(dev);
}
-/*
- * Given a multicast ethernet address, this routine calculates the
- * address's bit index in the logical address filter mask
- */
-
-static inline unsigned int ioc3_hash(const unsigned char *addr)
+static struct net_device_stats *ioc3_get_stats(struct net_device *dev)
{
- unsigned int temp = 0;
- u32 crc;
- int bits;
-
- crc = ether_crc_le(ETH_ALEN, addr);
-
- crc &= 0x3f; /* bit reverse lowest 6 bits for hash index */
- for (bits = 6; --bits >= 0; ) {
- temp <<= 1;
- temp |= (crc & 0x1);
- crc >>= 1;
- }
+ struct ioc3_private *ip = netdev_priv(dev);
+ struct ioc3_ethregs *regs = ip->regs;
- return temp;
+ dev->stats.collisions += (readl(®s->etcdc) & ETCDC_COLLCNT_MASK);
+ return &dev->stats;
}
-static void ioc3_get_drvinfo (struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- struct ioc3_private *ip = netdev_priv(dev);
+static const struct net_device_ops ioc3_netdev_ops = {
+ .ndo_open = ioc3_open,
+ .ndo_stop = ioc3_close,
+ .ndo_start_xmit = ioc3_start_xmit,
+ .ndo_tx_timeout = ioc3_timeout,
+ .ndo_get_stats = ioc3_get_stats,
+ .ndo_set_rx_mode = ioc3_set_multicast_list,
+ .ndo_do_ioctl = ioc3_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = ioc3_set_mac_address,
+};
+static void ioc3_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
strlcpy(info->driver, IOC3_NAME, sizeof(info->driver));
strlcpy(info->version, IOC3_VERSION, sizeof(info->version));
- strlcpy(info->bus_info, pci_name(ip->pdev), sizeof(info->bus_info));
+ strlcpy(info->bus_info, pci_name(to_pci_dev(dev->dev.parent)),
+ sizeof(info->bus_info));
}
static int ioc3_get_link_ksettings(struct net_device *dev,
@@ -1609,58 +861,362 @@ static const struct ethtool_ops ioc3_ethtool_ops = {
.set_link_ksettings = ioc3_set_link_ksettings,
};
-static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+/* Deal with fatal IOC3 errors. This condition might be caused by a hard or
+ * software problems, so we should try to recover
+ * more gracefully if this ever happens. In theory we might be flooded
+ * with such error interrupts if something really goes wrong, so we might
+ * also consider to take the interface down.
+ */
+static noinline void ioc3_error(struct ioc3_private *ip,
+ struct net_device *dev, u32 eisr)
{
- struct ioc3_private *ip = netdev_priv(dev);
- int rc;
+ u8 *iface = dev->name;
- spin_lock_irq(&ip->ioc3_lock);
- rc = generic_mii_ioctl(&ip->mii, if_mii(rq), cmd, NULL);
- spin_unlock_irq(&ip->ioc3_lock);
+ if (eisr & EISR_RXOFLO)
+ printk(KERN_ERR "%s: RX overflow.\n", iface);
+ if (eisr & EISR_RXBUFOFLO)
+ printk(KERN_ERR "%s: RX buffer overflow.\n", iface);
+ if (eisr & EISR_RXMEMERR)
+ printk(KERN_ERR "%s: RX PCI error.\n", iface);
+ if (eisr & EISR_RXPARERR)
+ printk(KERN_ERR "%s: RX SSRAM parity error.\n", iface);
+ if (eisr & EISR_TXBUFUFLO)
+ printk(KERN_ERR "%s: TX buffer underflow.\n", iface);
+ if (eisr & EISR_TXMEMERR)
+ printk(KERN_ERR "%s: TX PCI error.\n", iface);
- return rc;
+ ioc3_stop(ip);
+
+ /* This can trigger a BUG(): sleeping function called */
+ ioc3_init(dev);
+ ioc3_mii_init(ip);
+ ioc3_mii_start(ip);
+
+ netif_wake_queue(dev);
}
-static void ioc3_set_multicast_list(struct net_device *dev)
+static noinline void ioc3_rx(struct ioc3_private *ip, struct net_device *dev)
{
- struct netdev_hw_addr *ha;
- struct ioc3_private *ip = netdev_priv(dev);
- struct ioc3 *ioc3 = ip->regs;
- u64 ehar = 0;
+ struct sk_buff *skb, *new_skb;
+ int rx_entry, n_entry, len;
+ struct ioc3_erxbuf *rxb;
+ u32 w0, err;
- netif_stop_queue(dev); /* Lock out others. */
+ rx_entry = ip->rx_ci; /* RX consume index */
+ n_entry = ip->rx_pi;
- if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
- ip->emcr |= EMCR_PROMISC;
- ioc3_w_emcr(ip->emcr);
- (void) ioc3_r_emcr();
- } else {
- ip->emcr &= ~EMCR_PROMISC;
- ioc3_w_emcr(ip->emcr); /* Clear promiscuous. */
- (void) ioc3_r_emcr();
+ skb = ip->rx_skbs[rx_entry];
+ rxb = (struct ioc3_erxbuf *)(skb->data - RX_OFFSET);
+ w0 = be32_to_cpu(rxb->w0);
- if ((dev->flags & IFF_ALLMULTI) ||
- (netdev_mc_count(dev) > 64)) {
- /* Too many for hashing to make sense or we want all
- multicast packets anyway, so skip computing all the
- hashes and just accept all packets. */
- ip->ehar_h = 0xffffffff;
- ip->ehar_l = 0xffffffff;
- } else {
- netdev_for_each_mc_addr(ha, dev) {
- ehar |= (1UL << ioc3_hash(ha->addr));
+ while (w0 & ERXBUF_V) {
+ err = be32_to_cpu(rxb->err); /* It's valid */
+ if (err & ERXBUF_GOODPKT) {
+ len = ((w0 >> ERXBUF_BYTECNT_SHIFT) & 0x7ff) - 4;
+ skb_trim(skb, len);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ new_skb = ioc3_alloc_skb(dev);
+ if (!new_skb) {
+ /* Ouch, drop packet and just recycle packet
+ * to keep the ring filled.
+ */
+ dev->stats.rx_dropped++;
+ new_skb = skb;
+ goto next;
}
- ip->ehar_h = ehar >> 32;
- ip->ehar_l = ehar & 0xffffffff;
+
+ if (likely(ip->flags & IOC3_FLAG_RX_CHECKSUMS))
+ ioc3_tcpudp_checksum(skb,
+ (w0 & ERXBUF_IPCKSUM_MASK),
+ len);
+
+ netif_rx(skb);
+
+ ip->rx_skbs[rx_entry] = NULL; /* Poison */
+
+ /* Because we reserve afterwards. */
+ skb_put(new_skb, (RX_BUF_SIZE + RX_OFFSET));
+ rxb = (struct ioc3_erxbuf *)new_skb->data;
+ skb_reserve(new_skb, RX_OFFSET);
+
+ dev->stats.rx_packets++; /* Statistics */
+ dev->stats.rx_bytes += len;
+ } else {
+ /* The frame is invalid and the skb never reached the
+ * network layer so we can just recycle it.
+ */
+ new_skb = skb;
+ dev->stats.rx_errors++;
}
- ioc3_w_ehar_h(ip->ehar_h);
- ioc3_w_ehar_l(ip->ehar_l);
+
+ /* Statistics */
+ if (err & ERXBUF_CRCERR)
+ dev->stats.rx_crc_errors++;
+ if (err & ERXBUF_FRAMERR)
+ dev->stats.rx_frame_errors++;
+next:
+ ip->rx_skbs[rx_entry] = new_skb;
+ ip->rxr[rx_entry] = cpu_to_be64(ioc3_map(rxb, PCI64_ATTR_BAR));
+ rxb->w0 = 0; /* Clear valid flag */
+
+ /* Now go on to the next ring entry. */
+ n_entry++;
+ n_entry &= RX_MASK;
+ rx_entry++;
+ rx_entry &= RX_MASK;
+
+ skb = ip->rx_skbs[rx_entry];
+ rxb = (struct ioc3_erxbuf *)(skb->data - RX_OFFSET);
+ w0 = be32_to_cpu(rxb->w0);
}
+ ip->rx_ci = rx_entry;
+ ip->rx_pi = n_entry;
+ writel((n_entry << 3) | ERPIR_ARM, &ip->regs->erpir);
+}
+
+static noinline void ioc3_tx(struct ioc3_private *ip, struct net_device *dev)
+{
+ struct ioc3_ethregs *regs = ip->regs;
+ unsigned long packets = 0;
+ unsigned long bytes = 0;
+ int tx_entry, o_entry;
+ struct sk_buff *skb;
+ u32 etcir;
- netif_wake_queue(dev); /* Let us get going again. */
+ etcir = readl(®s->etcir);
+ tx_entry = (etcir >> 7) & TX_MASK;
+ o_entry = ip->tx_ci;
+
+ while (o_entry != tx_entry) {
+ packets++;
+ skb = ip->tx_skbs[o_entry];
+ bytes += skb->len;
+ dev_consume_skb_irq(skb);
+ ip->tx_skbs[o_entry] = NULL;
+
+ etcir = readl(®s->etcir); /* More pkts sent? */
+ tx_entry = (etcir >> 7) & TX_MASK;
+ o_entry = (o_entry + 1) & TX_MASK; /* Next */
+ }
+ ip->tx_ci = o_entry;
+
+ dev->stats.tx_bytes += bytes;
+ dev->stats.tx_packets += packets;
+ ip->txbfree += packets;
+
+ if (netif_queue_stopped(dev) && ip->txbfree > 0)
+ netif_wake_queue(dev);
}
-module_pci_driver(ioc3_driver);
+/* The interrupt handler does all of the Rx thread work
+ * and cleans up after the Tx thread.
+ */
+static irqreturn_t ioc3eth_intr(int irq, void *dev_id)
+{
+ struct ioc3_private *ip = netdev_priv(dev_id);
+ struct ioc3_ethregs *regs = ip->regs;
+ u32 eisr;
+
+ spin_lock(&ip->ioc3_lock);
+
+ eisr = readl(®s->eisr);
+
+ writel(eisr, ®s->eisr);
+ (void)readl(®s->eisr); /* Flush */
+
+ if (eisr & (EISR_RXTIMERINT | EISR_RXTHRESHINT))
+ ioc3_rx(ip, dev_id);
+
+ if (eisr & (EISR_TXEMPTY | EISR_TXEXDEF | EISR_TXEXPLICIT))
+ ioc3_tx(ip, dev_id);
+
+ if (eisr & (EISR_RXOFLO | EISR_RXBUFOFLO |
+ EISR_RXMEMERR | EISR_RXPARERR |
+ EISR_TXBUFUFLO | EISR_TXMEMERR))
+ ioc3_error(ip, dev_id, eisr);
+
+ spin_unlock(&ip->ioc3_lock);
+
+ return eisr ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int ioc3eth_nvmem_match(struct device *dev, const void *data)
+{
+ const char *name = dev_name(dev);
+ const char *prefix = data;
+ int prefix_len;
+
+ prefix_len = strlen(prefix);
+ if (strlen(name) < (prefix_len + 3))
+ return 0;
+
+ if (memcmp(prefix, name, prefix_len) != 0)
+ return 0;
+
+ /* found nvmem device which is attached to our ioc3
+ * now check for one wire family code 09, 89 and 91
+ */
+ if (memcmp(name + prefix_len, "09-", 3) == 0)
+ return 1;
+ if (memcmp(name + prefix_len, "89-", 3) == 0)
+ return 1;
+ if (memcmp(name + prefix_len, "91-", 3) == 0)
+ return 1;
+
+ return 0;
+}
+
+static int ioc3eth_get_mac_addr(struct resource *res, u8 mac_addr[6])
+{
+ struct nvmem_device *nvmem;
+ char prefix[24];
+ u8 prom[16];
+ int ret;
+ int i;
+
+ snprintf(prefix, sizeof(prefix), "ioc3-%012llx-",
+ res->start & ~0xffff);
+
+ nvmem = nvmem_device_find(prefix, ioc3eth_nvmem_match);
+ if (IS_ERR(nvmem))
+ return PTR_ERR(nvmem);
+
+ ret = nvmem_device_read(nvmem, 0, 16, prom);
+ nvmem_device_put(nvmem);
+ if (ret < 0)
+ return ret;
+
+ /* check, if content is valid */
+ if (prom[0] != 0x0a ||
+ crc16(CRC16_INIT, prom, 13) != CRC16_VALID)
+ return -EINVAL;
+
+ for (i = 0; i < 6; i++)
+ mac_addr[i] = prom[10 - i];
+
+ return 0;
+}
+
+static int ioc3eth_probe(struct platform_device *pdev)
+{
+ u32 sw_physid1, sw_physid2, vendor, model, rev;
+ struct ioc3_private *ip;
+ struct net_device *dev;
+ struct resource *regs;
+ u8 mac_addr[6];
+ int err;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ /* get mac addr from one wire prom */
+ if (ioc3eth_get_mac_addr(regs, mac_addr))
+ return -EPROBE_DEFER; /* not available yet */
+
+ dev = alloc_etherdev(sizeof(struct ioc3_private));
+ if (!dev)
+ return -ENOMEM;
+
+ /* The IOC3-specific entries in the device structure. */
+ dev->watchdog_timeo = 5 * HZ;
+ dev->netdev_ops = &ioc3_netdev_ops;
+ dev->ethtool_ops = &ioc3_ethtool_ops;
+ dev->features = NETIF_F_IP_CSUM | NETIF_F_HIGHDMA;
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ ip = netdev_priv(dev);
+ ip->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (!ip->regs)
+ return -ENOMEM;
+
+ ip->ssram = devm_platform_ioremap_resource(pdev, 1);
+ if (!ip->ssram)
+ return -ENOMEM;
+
+ dev->irq = platform_get_irq(pdev, 0);
+ if (dev->irq < 0)
+ return dev->irq;
+
+ if (request_irq(dev->irq, ioc3eth_intr, IRQF_SHARED, "ioc3-eth", dev)) {
+ pr_err("%s: Can't get irq %d\n", dev->name, dev->irq);
+ return -ENODEV;
+ }
+
+ spin_lock_init(&ip->ioc3_lock);
+ timer_setup(&ip->ioc3_timer, ioc3_timer, 0);
+
+ ioc3_stop(ip);
+ ioc3_init(dev);
+
+ ip->mii.phy_id_mask = 0x1f;
+ ip->mii.reg_num_mask = 0x1f;
+ ip->mii.dev = dev;
+ ip->mii.mdio_read = ioc3_mdio_read;
+ ip->mii.mdio_write = ioc3_mdio_write;
+
+ ioc3_mii_init(ip);
+
+ if (ip->mii.phy_id == -1) {
+ printk(KERN_CRIT "ioc3-eth(%s): Didn't find a PHY, goodbye.\n",
+ dev->name);
+ err = -ENODEV;
+ goto out_stop;
+ }
+
+ ioc3_mii_start(ip);
+ ioc3_ssram_disc(ip);
+ memcpy(dev->dev_addr, mac_addr, ETH_ALEN);
+
+ sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
+ sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2);
+
+ err = register_netdev(dev);
+ if (err)
+ goto out_stop;
+
+ mii_check_media(&ip->mii, 1, 1);
+ ioc3_setup_duplex(ip);
+
+ vendor = (sw_physid1 << 12) | (sw_physid2 >> 4);
+ model = (sw_physid2 >> 4) & 0x3f;
+ rev = sw_physid2 & 0xf;
+ printk(KERN_INFO "%s: Using PHY %d, vendor 0x%x, model %d, rev %d.\n",
+ dev->name, ip->mii.phy_id, vendor, model, rev);
+ printk(KERN_INFO "%s: IOC3 SSRAM has %d kbyte.\n", dev->name,
+ (ip->emcr & EMCR_BUFSIZ ? 128 : 64));
+
+ return 0;
+
+out_stop:
+ ioc3_stop(ip);
+ del_timer_sync(&ip->ioc3_timer);
+ ioc3_free_rings(ip);
+ free_netdev(dev);
+ return err;
+}
+
+static int ioc3eth_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct ioc3_private *ip = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ del_timer_sync(&ip->ioc3_timer);
+ ioc3_free_rings(ip);
+ free_netdev(dev);
+
+ return 0;
+}
+
+static struct platform_driver ioc3eth_driver = {
+ .probe = ioc3eth_probe,
+ .remove = ioc3eth_remove,
+ .driver = {
+ .name = "ioc3-eth",
+ }
+};
+
+module_platform_driver(ioc3eth_driver);
+
MODULE_AUTHOR("Ralf Baechle <ralf@...ux-mips.org>");
MODULE_DESCRIPTION("SGI IOC3 Ethernet driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/8250_ioc3.c b/drivers/tty/serial/8250/8250_ioc3.c
new file mode 100644
index 000000000000..2be6ed2967e0
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_ioc3.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 8250 UART driver
+ *
+ * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@...e.de>
+ *
+ * based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@...ligned.org>
+ * Copyright (C) 2014 Joshua Kinard <kumba@...too.org>
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+#define IOC3_UARTCLK (22000000 / 3)
+
+struct ioc3_8250_data {
+ int line;
+};
+
+static unsigned int ioc3_serial_in(struct uart_port *p, int offset)
+{
+ return readb(p->membase + offset);
+}
+
+static void ioc3_serial_out(struct uart_port *p, int offset, int value)
+{
+ writeb(value, p->membase + offset);
+}
+
+static int serial8250_ioc3_probe(struct platform_device *pdev)
+{
+ struct ioc3_8250_data *data;
+ struct uart_8250_port up;
+ struct resource *r;
+ void __iomem *membase;
+ int irq, line;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ membase = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
+ if (!membase)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ irq = 0; /* no interrupt -> use polling */
+
+ /* Register serial ports with 8250.c */
+ memset(&up, 0, sizeof(struct uart_8250_port));
+ up.port.iotype = UPIO_MEM;
+ up.port.uartclk = IOC3_UARTCLK;
+ up.port.type = PORT_16550A;
+ up.port.irq = irq;
+ up.port.flags = (UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ);
+ up.port.dev = &pdev->dev;
+ up.port.membase = membase;
+ up.port.mapbase = r->start;
+ up.port.serial_in = ioc3_serial_in;
+ up.port.serial_out = ioc3_serial_out;
+ line = serial8250_register_8250_port(&up);
+ if (line < 0)
+ return line;
+
+ platform_set_drvdata(pdev, data);
+ return 0;
+}
+
+static int serial8250_ioc3_remove(struct platform_device *pdev)
+{
+ struct ioc3_8250_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+ return 0;
+}
+
+static struct platform_driver serial8250_ioc3_driver = {
+ .probe = serial8250_ioc3_probe,
+ .remove = serial8250_ioc3_remove,
+ .driver = {
+ .name = "ioc3-serial8250",
+ }
+};
+
+module_platform_driver(serial8250_ioc3_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@...e.de>");
+MODULE_DESCRIPTION("SGI IOC3 8250 UART driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 509f6a3bb9ff..7ed0a63a3a71 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -366,6 +366,17 @@ config SERIAL_8250_EM
port hardware found on the Emma Mobile line of processors.
If unsure, say N.
+config SERIAL_8250_IOC3
+ tristate "SGI IOC3 8250 UART support"
+ depends on SGI_MFD_IOC3 && SERIAL_8250
+ select SERIAL_8250_EXTENDED
+ select SERIAL_8250_SHARE_IRQ
+ help
+ Enable this if you have a SGI Origin or Octane machine. This module
+ provides basic serial support by directly driving the UART chip
+ behind the IOC3 device on those systems. Maximum baud speed is
+ 38400bps using this driver.
+
config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
depends on SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 18751bc63a84..79f74b4d57e5 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
+obj-$(CONFIG_SERIAL_8250_IOC3) += 8250_ioc3.o
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
--
2.13.7
Powered by blists - more mailing lists