lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190809133552.21597-5-alexandru.ardelean@analog.com>
Date:   Fri, 9 Aug 2019 16:35:42 +0300
From:   Alexandru Ardelean <alexandru.ardelean@...log.com>
To:     <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
CC:     <davem@...emloft.net>, <robh+dt@...nel.org>,
        <mark.rutland@....com>, <f.fainelli@...il.com>,
        <hkallweit1@...il.com>, <andrew@...n.ch>,
        Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [PATCH v3 04/14] net: phy: adin: add {write,read}_mmd hooks

Both ADIN1200 & ADIN1300 support Clause 45 access for some registers.
The Extended Management Interface (EMI) registers are accessible via both
Clause 45 (at register MDIO_MMD_VEND1) and using Clause 22.

However, the Clause 22 access for MMD regs differs from the standard one
defined by 802.3. The ADIN PHYs  use registers ExtRegPtr (0x0010) and
ExtRegData (0x0011) to access Clause 45 & EMI registers.

The indirect access is done via the following mechanism (for both R/W):
1. Write the address of the register in the ExtRegPtr
2. Read/write the value of the register (written at ExtRegPtr)

This mechanism is needed to manage configuration of chip settings and to
access EEE registers (via Clause 22).

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
---
 drivers/net/phy/adin.c | 46 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index 91ff26d08fd5..8973ad819b93 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -14,6 +14,9 @@
 #define PHY_ID_ADIN1200				0x0283bc20
 #define PHY_ID_ADIN1300				0x0283bc30
 
+#define ADIN1300_MII_EXT_REG_PTR		0x0010
+#define ADIN1300_MII_EXT_REG_DATA		0x0011
+
 #define ADIN1300_INT_MASK_REG			0x0018
 #define   ADIN1300_INT_MDIO_SYNC_EN		BIT(9)
 #define   ADIN1300_INT_ANEG_STAT_CHNG_EN	BIT(8)
@@ -53,6 +56,45 @@ static int adin_phy_config_intr(struct phy_device *phydev)
 			      ADIN1300_INT_MASK_EN);
 }
 
+static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum)
+{
+	struct mii_bus *bus = phydev->mdio.bus;
+	int phy_addr = phydev->mdio.addr;
+	int err;
+
+	if (phydev->is_c45) {
+		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
+
+		return __mdiobus_read(bus, phy_addr, addr);
+	}
+
+	err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, regnum);
+	if (err)
+		return err;
+
+	return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA);
+}
+
+static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum,
+			  u16 val)
+{
+	struct mii_bus *bus = phydev->mdio.bus;
+	int phy_addr = phydev->mdio.addr;
+	int err;
+
+	if (phydev->is_c45) {
+		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
+
+		return __mdiobus_write(bus, phy_addr, addr, val);
+	}
+
+	err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, regnum);
+	if (err)
+		return err;
+
+	return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val);
+}
+
 static struct phy_driver adin_driver[] = {
 	{
 		PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
@@ -64,6 +106,8 @@ static struct phy_driver adin_driver[] = {
 		.config_intr	= adin_phy_config_intr,
 		.resume		= genphy_resume,
 		.suspend	= genphy_suspend,
+		.read_mmd	= adin_read_mmd,
+		.write_mmd	= adin_write_mmd,
 	},
 	{
 		PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
@@ -75,6 +119,8 @@ static struct phy_driver adin_driver[] = {
 		.config_intr	= adin_phy_config_intr,
 		.resume		= genphy_resume,
 		.suspend	= genphy_suspend,
+		.read_mmd	= adin_read_mmd,
+		.write_mmd	= adin_write_mmd,
 	},
 };
 
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ