lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8c5e499d-7952-0920-339b-82e799c3358f@gmail.com>
Date:   Fri, 9 Aug 2019 20:43:50 +0200
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        David Miller <davem@...emloft.net>
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH net-next v2 2/4] net: phy: prepare phylib to deal with PHY's
 extending Clause 22

The integrated PHY in 2.5Gbps chip RTL8125 is the first (known to me)
PHY that uses standard Clause 22 for all modes up to 1Gbps and adds
2.5Gbps control using vendor-specific registers. To use phylib for
the standard part little extensions are needed:
- Move most of genphy_config_aneg to a new function
  __genphy_config_aneg that takes a parameter whether restarting
  auto-negotiation is needed (depending on whether content of
  vendor-specific advertisement register changed).
- Don't clear phydev->lp_advertising in genphy_read_status so that
  we can set non-C22 mode flags before.

Basically both changes mimic the behavior of the equivalent Clause 45
functions.

Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
---
 drivers/net/phy/phy_device.c | 27 ++++++++++++---------------
 include/linux/phy.h          |  8 +++++++-
 2 files changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index a70a98dc9..b039632de 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1671,18 +1671,20 @@ int genphy_restart_aneg(struct phy_device *phydev)
 EXPORT_SYMBOL(genphy_restart_aneg);
 
 /**
- * genphy_config_aneg - restart auto-negotiation or write BMCR
+ * __genphy_config_aneg - restart auto-negotiation or write BMCR
  * @phydev: target phy_device struct
+ * @changed: whether autoneg is requested
  *
  * Description: If auto-negotiation is enabled, we configure the
  *   advertising, and then restart auto-negotiation.  If it is not
  *   enabled, then we write the BMCR.
  */
-int genphy_config_aneg(struct phy_device *phydev)
+int __genphy_config_aneg(struct phy_device *phydev, bool changed)
 {
-	int err, changed;
+	int err;
 
-	changed = genphy_config_eee_advert(phydev);
+	if (genphy_config_eee_advert(phydev))
+		changed = true;
 
 	if (AUTONEG_ENABLE != phydev->autoneg)
 		return genphy_setup_forced(phydev);
@@ -1690,10 +1692,10 @@ int genphy_config_aneg(struct phy_device *phydev)
 	err = genphy_config_advert(phydev);
 	if (err < 0) /* error */
 		return err;
+	else if (err)
+		changed = true;
 
-	changed |= err;
-
-	if (changed == 0) {
+	if (!changed) {
 		/* Advertisement hasn't changed, but maybe aneg was never on to
 		 * begin with?  Or maybe phy was isolated?
 		 */
@@ -1703,18 +1705,15 @@ int genphy_config_aneg(struct phy_device *phydev)
 			return ctl;
 
 		if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
-			changed = 1; /* do restart aneg */
+			changed = true; /* do restart aneg */
 	}
 
 	/* Only restart aneg if we are advertising something different
 	 * than we were before.
 	 */
-	if (changed > 0)
-		return genphy_restart_aneg(phydev);
-
-	return 0;
+	return changed ? genphy_restart_aneg(phydev) : 0;
 }
-EXPORT_SYMBOL(genphy_config_aneg);
+EXPORT_SYMBOL(__genphy_config_aneg);
 
 /**
  * genphy_aneg_done - return auto-negotiation status
@@ -1801,8 +1800,6 @@ int genphy_read_status(struct phy_device *phydev)
 	phydev->pause = 0;
 	phydev->asym_pause = 0;
 
-	linkmode_zero(phydev->lp_advertising);
-
 	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
 		if (phydev->is_gigabit_capable) {
 			lpagb = phy_read(phydev, MII_STAT1000);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 462b90b73..7117825ee 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1069,7 +1069,7 @@ int genphy_read_abilities(struct phy_device *phydev);
 int genphy_setup_forced(struct phy_device *phydev);
 int genphy_restart_aneg(struct phy_device *phydev);
 int genphy_config_eee_advert(struct phy_device *phydev);
-int genphy_config_aneg(struct phy_device *phydev);
+int __genphy_config_aneg(struct phy_device *phydev, bool changed);
 int genphy_aneg_done(struct phy_device *phydev);
 int genphy_update_link(struct phy_device *phydev);
 int genphy_read_status(struct phy_device *phydev);
@@ -1077,6 +1077,12 @@ int genphy_suspend(struct phy_device *phydev);
 int genphy_resume(struct phy_device *phydev);
 int genphy_loopback(struct phy_device *phydev, bool enable);
 int genphy_soft_reset(struct phy_device *phydev);
+
+static inline int genphy_config_aneg(struct phy_device *phydev)
+{
+	return __genphy_config_aneg(phydev, false);
+}
+
 static inline int genphy_no_soft_reset(struct phy_device *phydev)
 {
 	return 0;
-- 
2.22.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ