lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190814144024.27975-1-marek.behun@nic.cz>
Date:   Wed, 14 Aug 2019 16:40:24 +0200
From:   Marek Behún <marek.behun@....cz>
To:     netdev@...r.kernel.org
Cc:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Marek Behún <marek.behun@....cz>
Subject: [PATCH net-next v2] net: dsa: mv88e6xxx: check for mode change in port_setup_mac

The mv88e6xxx_port_setup_mac checks if the requested MAC settings are
different from the current ones, and if not, does nothing (since chaning
them requires putting the link down).

In this check it only looks if the triplet [link, speed, duplex] is
being changed.

This patch adds support to also check if the mode parameter (of type
phy_interface_t) is requested to be changed. The current mode is
computed by the ->port_link_state() method, and if it is different from
PHY_INTERFACE_MODE_NA, we check for equality with the requested mode.

In the implementations of the mv88e6250_port_link_state() method we set
the current mode to PHY_INTERFACE_MODE_NA - so the code does not check
for mode change on 6250.

In the mv88e6352_port_link_state() method, we use the cached cmode of
the port to determine the mode as phy_interface_t (and if it is not
enough, eg. for RGMII, we also look at the port control register for
RX/TX timings).

Signed-off-by: Marek Behún <marek.behun@....cz>
---
 drivers/net/dsa/mv88e6xxx/chip.c |  4 +++-
 drivers/net/dsa/mv88e6xxx/port.c | 38 ++++++++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/port.h |  1 +
 3 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 818a83eb2dcb..9b3ad22a5b98 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -417,7 +417,9 @@ int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port, int link,
 	 */
 	if (state.link == link &&
 	    state.speed == speed &&
-	    state.duplex == duplex)
+	    state.duplex == duplex &&
+	    (state.interface == mode ||
+	     state.interface == PHY_INTERFACE_MODE_NA))
 		return 0;
 
 	/* Port's MAC control must not be changed unless the link is down */
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index 04309ef0a1cc..c95cdb73e5a2 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -590,6 +590,7 @@ int mv88e6250_port_link_state(struct mv88e6xxx_chip *chip, int port,
 	state->link = !!(reg & MV88E6250_PORT_STS_LINK);
 	state->an_enabled = 1;
 	state->an_complete = state->link;
+	state->interface = PHY_INTERFACE_MODE_NA;
 
 	return 0;
 }
@@ -600,6 +601,43 @@ int mv88e6352_port_link_state(struct mv88e6xxx_chip *chip, int port,
 	int err;
 	u16 reg;
 
+	switch (chip->ports[port].cmode) {
+	case MV88E6XXX_PORT_STS_CMODE_RGMII:
+		err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_MAC_CTL,
+					  &reg);
+		if (err)
+			return err;
+
+		if ((reg & MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_RXCLK) &&
+		    (reg & MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_TXCLK))
+			state->interface = PHY_INTERFACE_MODE_RGMII_ID;
+		else if (reg & MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_RXCLK)
+			state->interface = PHY_INTERFACE_MODE_RGMII_RXID;
+		else if (reg & MV88E6XXX_PORT_MAC_CTL_RGMII_DELAY_TXCLK)
+			state->interface = PHY_INTERFACE_MODE_RGMII_TXID;
+		else
+			state->interface = PHY_INTERFACE_MODE_RGMII;
+		break;
+	case MV88E6XXX_PORT_STS_CMODE_1000BASE_X:
+		state->interface = PHY_INTERFACE_MODE_1000BASEX;
+		break;
+	case MV88E6XXX_PORT_STS_CMODE_SGMII:
+		state->interface = PHY_INTERFACE_MODE_SGMII;
+		break;
+	case MV88E6XXX_PORT_STS_CMODE_2500BASEX:
+		state->interface = PHY_INTERFACE_MODE_2500BASEX;
+		break;
+	case MV88E6XXX_PORT_STS_CMODE_XAUI:
+		state->interface = PHY_INTERFACE_MODE_XAUI;
+		break;
+	case MV88E6XXX_PORT_STS_CMODE_RXAUI:
+		state->interface = PHY_INTERFACE_MODE_RXAUI;
+		break;
+	default:
+		/* we do not support other cmode values here */
+		state->interface = PHY_INTERFACE_MODE_NA;
+	}
+
 	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &reg);
 	if (err)
 		return err;
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index ceec771f8bfc..1abf5ea033e2 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -42,6 +42,7 @@
 #define MV88E6XXX_PORT_STS_TX_PAUSED		0x0020
 #define MV88E6XXX_PORT_STS_FLOW_CTL		0x0010
 #define MV88E6XXX_PORT_STS_CMODE_MASK		0x000f
+#define MV88E6XXX_PORT_STS_CMODE_RGMII		0x0007
 #define MV88E6XXX_PORT_STS_CMODE_100BASE_X	0x0008
 #define MV88E6XXX_PORT_STS_CMODE_1000BASE_X	0x0009
 #define MV88E6XXX_PORT_STS_CMODE_SGMII		0x000a
-- 
2.21.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ