netdev - Re: [EXT] Re: [PATCH net-next 1/1] Added BASE-T1 PHY support to PHY Subsystem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <AM6PR0402MB3798CD854B37F430980E204F86AF0@AM6PR0402MB3798.eurprd04.prod.outlook.com>
Date:   Fri, 16 Aug 2019 11:56:38 +0000
From:   Christian Herber <christian.herber@....com>
To:     Andrew Lunn <andrew@...n.ch>
CC:     "davem@...emloft.net" <davem@...emloft.net>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [EXT] Re: [PATCH net-next 1/1] Added BASE-T1 PHY support to PHY
 Subsystem

On 15.08.2019 17:56, Andrew Lunn wrote:
> Caution: EXT Email
> 
> On Thu, Aug 15, 2019 at 03:32:29PM +0000, Christian Herber wrote:
>> BASE-T1 is a category of Ethernet PHYs.
>> They use a single copper pair for transmission.
>> This patch add basic support for this category of PHYs.
>> It coveres the discovery of abilities and basic configuration.
>> It includes setting fixed speed and enabling auto-negotiation.
>> BASE-T1 devices should always Clause-45 managed.
>> Therefore, this patch extends phy-c45.c.
>> While for some functions like auto-neogtiation different registers are
>> used, the layout of these registers is the same for the used fields.
>> Thus, much of the logic of basic Clause-45 devices can be reused.
>>
>> Signed-off-by: Christian Herber <christian.herber@....com>
>> ---
>>   drivers/net/phy/phy-c45.c    | 113 +++++++++++++++++++++++++++++++----
>>   drivers/net/phy/phy-core.c   |   4 +-
>>   include/uapi/linux/ethtool.h |   2 +
>>   include/uapi/linux/mdio.h    |  21 +++++++
>>   4 files changed, 129 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
>> index b9d4145781ca..9ff0b8c785de 100644
>> --- a/drivers/net/phy/phy-c45.c
>> +++ b/drivers/net/phy/phy-c45.c
>> @@ -8,13 +8,23 @@
>>   #include <linux/mii.h>
>>   #include <linux/phy.h>
>>
>> +#define IS_100BASET1(phy) (linkmode_test_bit( \
>> +                        ETHTOOL_LINK_MODE_100baseT1_Full_BIT, \
>> +                        (phy)->supported))
>> +#define IS_1000BASET1(phy) (linkmode_test_bit( \
>> +                         ETHTOOL_LINK_MODE_1000baseT1_Full_BIT, \
>> +                         (phy)->supported))
> 
> Hi Christian
> 
> We already have the flag phydev->is_gigabit_capable. Maybe add a flag
> phydev->is_t1_capable
> 
>> +
>> +static u32 get_aneg_ctrl(struct phy_device *phydev);
>> +static u32 get_aneg_stat(struct phy_device *phydev);
> 
> No forward declarations please. Put the code in the right order so
> they are not needed.
> 
> Thanks
> 
>       Andrew
> 

Hi Andrew,

thanks for feedback. The use of an additional flag is a good proposal.
I was hesitant to touch the phydev structure.
I will add this along with removing the forward declaration in v2.

Regards,

Christian