[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20190816.115721.2066524764941816948.davem@davemloft.net>
Date: Fri, 16 Aug 2019 11:57:21 -0700 (PDT)
From: David Miller <davem@...emloft.net>
To: alexandru.ardelean@...log.com
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, robh+dt@...nel.org,
mark.rutland@....com, f.fainelli@...il.com, hkallweit1@...il.com,
andrew@...n.ch
Subject: Re: [PATCH v5 00/13] net: phy: adin: add support for Analog
Devices PHYs
From: Alexandru Ardelean <alexandru.ardelean@...log.com>
Date: Fri, 16 Aug 2019 16:09:58 +0300
> This changeset adds support for Analog Devices Industrial Ethernet PHYs.
> Particularly the PHYs this driver adds support for:
> * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY
> * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit
> Ethernet PHY
>
> The 2 chips are register compatible with one another. The main
> difference being that ADIN1200 doesn't operate in gigabit mode.
>
> The chips can be operated by the Generic PHY driver as well via the
> standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the
> kernel as well. This assumes that configuration of the PHY has been done
> completely in HW, according to spec, i.e. no extra SW configuration
> required.
>
> This changeset also implements the ability to configure the chips via SW
> registers.
>
> Datasheets:
> https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf
> https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
Series applied, thank you.
Powered by blists - more mailing lists